soundcore Glow A2337 Portable Speaker
Product Usage Instructions
Charging Your Speaker
- Flashing Red: Low Battery
- Steady Red: Being Charged
- Steady White: Fully Charged
Powering On / Off
- Press: Steady White – Power On
- Press and Hold for 2 Seconds: Power Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select Soundcore Glow from the Bluetooth list to connect.
TWS Mode (True Wireless Stereo)
Two identical Soundcore speakers can pair for stereo sound. Press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
PartyCast Mode
Press the PartyCast button on up to 100 Soundcore speakers with the PartyCast function to synchronise audio and light.
Light Modes
The light on the speaker changes with the rhythm of the music. There are 5 preset music-sync light modes available.
AUX-In Mode
Use the AUX input port for wired connections.
At a Glance
| Power Button | Bluetooth LED | ||
| Power LED | PartyCast Button | ||
| Light Effect Button | Volume Down Button | ||
| Play/Pause Button | Strap | ||
| Volume Up Button | AUX Input Port | ||
| Bluetooth Button | USB-C Charging Port |
Charging Your Speaker
- Use a certified USB-C cable and charger to prevent any damage.
|
|
Flashing Red | Low Battery |
 |
Steady Red | Being Charged |
 |
Steady White | Fully Charged |
Powering On / Off
This speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
Press the Bluetooth button to enter Bluetooth pairing mode, then select “Soundcore Glow” from the Bluetooth list to connect. GlowPAIRINGCONNECTED
- To re-enter Bluetooth pairing mode, press the Bluetooth button once.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS Mode
Two identical Soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel). With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
- To exit TWS mode, press and hold the Bluetooth button for at least 2 seconds.
PartyCast Mode
With one speaker connected to a smartphone, press the PartyCast button on up to 100 Soundcore speakers with the PartyCast function to synchronise audio and light.
- Soundcore speakers with PartyCast function can also be connected with this speaker.
Light Modes
The light on the speaker changes with the rhythm of the music. There are 5 preset music-sync light modes: Campfire Vibes / Neon Night / Spring Break / Euphoric Dance / Romantic Stroll. You can also check all available light modes in the Soundcore app.
 |
Press | Switch Light Modes |
| Press and Hold for 2 Seconds | Turn off |
AUX-In Mode
- AUX cable is not included.
- When using AUX-In mode, control audio playback via the connected device.
 |
Press | Power On |
| Press and Hold for 2 Seconds | Power Off | |
|
Press | Play / Pause |
| Press Twice | Next Track | |
| Press Three Times | Previous Track | |
| Press | Answer / End a Call | |
| Press and Hold for 2 Seconds | Reject a Call | |
| Press and Hold for 2 Seconds | Activate Voice Assistant Software | |
 |
Press | Enter Bluetooth Pairing Mode |
| Press and Hold for 2 Seconds | Enter / Exit TWS Pairing Mode | |
 |
Press | Switch Light Modes |
| Press and Hold for 2 Seconds | Turn off | |
 |
Press | Volume Up / Down |
 |
Press | Enter / Exit PartyCast Pairing Mode |
soundcore App
Download the Soundcore app to enhance your experience.
- Product information: Check the product name and software version, or read the user guide.
- Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
- Battery status: Indicates the remaining battery level of your speaker.
- Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
- EQ settings: There are 4 preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- Soundcore Signature: Standard EQ mode optimised for well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- BassUp: Turn on BassUp to enhance the low-frequency sound.
- Set auto-power off time: Set an auto-power off time. The speaker will automatically turn off when the time is up.
- Light effects: Besides the music-sync light effects, you can also choose your favorite light effects.
- Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the Bluetooth button and volume up button simultaneously for at least 4 seconds to reset the speaker.
Specifications
| DC Power Input | 5V 3A |
| Battery Capacity | 3350mAh/7.2V |
| Audio Output Power | 30W |
| Speaker Driver | 2.5″ Full Range x1 |
| Charging Time | 4 Hours |
| Play Time (varies by volume level and music content) | Up to 18 Hours |
| Waterproof Level | IP67 |
| Bluetooth Version | 5.3 |
| Bluetooth Range | 100m / 328ft |
Note: The ‘x’ of SN Code: xxxxxxxxxxxxxxxx is a variable, see table below.
| Variable ‘x’ | Range of variables | Content |
|
Seventh |
0-9 or A-F |
Denotes the hardware version which does not affect the safety compliance. |
|
Eighth |
8,9, A, B, C… |
Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on. |
|
Ninth and tenth |
01,02,03… |
Denotes weeks, 01 means the first week in this year, 02 means the second week in this year, and so on. |
|
Eleventh |
1-7 |
Denotes date, 1 means Monday, 2 means Tuesday…, 7 means Sunday and so on. |
| The last five | 00001-99999 | Denotes serial No. |
- Power consumption in standby mode: ≤0.5W
- Power management: ≤ 20min
- Information on the applicable adapter:
- brand: ANKER
- Manufacturer: Anker Innovations Limited
- Model: A2337
- Input: 100-240V~ 1.0A, 50-60Hz
- Output: 5.0V ⎓ 3.0A 15.0W / 9.0V ⎓ 3.0A 27.0W / 12.0V ⎓ 2.5A 30.0W / 15.0V ⎓ 2.0A 30.0W / 20.0V ⎓ 1.5A 30.0W (30.0W Max)
FAQ
Q: How do I check the battery status of the speaker?
A: The battery status is indicated by the LED lights (Flashing Red, Steady Red, Steady White).
Q: How do I pair two speakers for stereo sound?
A: Press and hold the Bluetooth button for 2 seconds on both speakers to enter TWS pairing mode.
Q: How many light modes are available on the speaker?
A: There are 5 preset music-sync light modes available on the speaker.
Documents / Resources
 |
soundcore Glow A2337 Portable Speaker [pdf] User Guide V03, A3166, Glow A2337 Portable Speaker, Glow A2337, Portable Speaker, Speaker |