8BitDo-LOGO

8BitDo D897 Ultimate C Bluetooth Controller

8BitDo-D897-Ultimate-C-Bluetooth-Controller-PRODUCT

OVERVIEW

8BitDo-D897-Ultimate-C-Bluetooth-Controller-FIG- (1)

  • Press the home button to turn on the controller.
  • Hold the home button for 3 seconds to turn off the controller.
  • Hold the home button for 8 seconds to force the controller off.

PRODUCT FUNCTION

Switch8BitDo-D897-Ultimate-C-Bluetooth-Controller-FIG- (2)

  • System requirement: Switch 3.0.0 or above.
  • NFC scanning, IR camera, HD rumble, and notification LED are not supported.

Bluetooth connection

  1. Press the home button to turn on the controller.
  2. Hold the pairing button for 3 seconds to enter its pairing mode, the status LED will start to blink rapidly. (This is required for the very first time only)
  3. Go to your Switch settings–Controllers and Sensors–Change grip/order, then wait for the connection.
  4. The status LED will remain solid when the connection is successful.

Wired connection

  • * Please ensure the [Pro Controller Wired Communication] is enabled in the system setting.
  • Connect the controller to the Switch via a USB cable and wait until the controller is recognized by the system to play.

Battery8BitDo-D897-Ultimate-C-Bluetooth-Controller-FIG- (3)
16 hours of playtime with a 480 mAh built-in lithium battery pack, rechargeable with 2 hours of charging time.

8BitDo-D897-Ultimate-C-Bluetooth-Controller-FIG- (7)

  • The controller will automatically shut down if there is no connection within 1 minute after startup or no activity within 15 minutes after connection.
  • The controller will not shut down when it’s over a wired connection.

Safety Warnings

8BitDo-D897-Ultimate-C-Bluetooth-Controller-FIG- (4)Warnings

  • Please always use batteries, chargers, and accessories provided by the manufacturer.
  • The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
  • Do not attempt to disassemble, modify, or repair the device yourself. Unauthorized actions may result in serious injury.
  • Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
  • Any unauthorized changes or modifications to the device will void the manufacturer’s warranty.

MORE INFO

Support8BitDo-D897-Ultimate-C-Bluetooth-Controller-FIG- (5)

Documents / Resources

8BitDo D897 Ultimate C Bluetooth Controller [pdf] Instruction Manual
D897 Ultimate C Bluetooth Controller, D897, Ultimate C Bluetooth Controller, Bluetooth Controller, Controller

References

Leave a comment

Your email address will not be published. Required fields are marked *