SNAPPER PS-B008WALR Multi Function 10000mAh Power Bank
Product Diagram
Product Parameter
- Model: PS-B008WALR Material: ABS+PC Fireproof
- Capacity: 10000mAh@3.7V 37Wh AC Input: 100~240V AC 50Hz/60Hz 0.3A(Max)
- Type-C Input: DC5V3A,9V2A,12V1.5A Type-C Output: DC 5V3A,9V2.22A, 12V1.67A PD 20W Max
- Type-C Cable Output: DC 5V3A,9V2.22A, 12V1.67A PD 20W Max
- Lighitng adaptor output: DC 5V2.4A，9V2A
- USB Output: DC 5V/3A,9V/2A,12V/1.5A 18W Max Wireless Output: 15W（2.5W Max for Apple Watch)
WHAT’ S INCLUDED
- 1 x Multi-function Power Bank
Optional Accessories
- 1 x AU Adapter Plug
- 1 x EU Adapter Plug
- 1 x UK Adapter Plug
- 1 x IN Adapter Plug
- 1 x KC Adapter Plug
User Guide
CHARGING & RECHARGING
Using the Power Bank
Please select your charging method from below and connect to a device.
- Built-in Cables
- USB-A Port
- Type-C Port
- Wireless Charger
Checking the Battery Level
- Simply press the power button once, and the digital screen will display the current percentage level.
- Double click the power button or in standby mode for about 30 seconds, the display and power will automatically turn off.
Recharging the Multi-function Power Bank
There are two ways to charge the internal battery:
- Wall Plug-Fold out plug and connect to a wall outlet
- Type-C Port-Plug a Type-C cable into the Type-C port. Plug the other end into a USB charger.
NOTE: The attached Type-C cable and Lightning adapter is for output only.
WARNING:
- The power bank is NOT a toy and should be kept away from children.
- Please do NOT use the power bank in direct sunlight or extreme heat for extended periods of time.
- Please do NOT submerge the power bank in water.
- Please do NOT leave the power bank near the fire.
- Please do NOT subject the power bank to harsh chemicals.
- Please do NOT use the power bank if it has been damaged and/or modified.
- Please do NOT insert any foreign objects into the openings or port of the power bank.
- Please do NOT attempt to disassemble, repair, or open the power bank in any way.
FCC warning statements:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
Documents / Resources
 |
SNAPPER PS-B008WALR Multi Function 10000mAh Power Bank [pdf] User Manual PSB008WALR, 2BC8J-PS-B008WALR, 2BC8JPSB008WALR, PS-B008WALR Multi Function 10000mAh Power Bank, PS-B008WALR, Multi Function 10000mAh Power Bank, 10000mAh Power Bank, Power Bank, Bank |
