yucvision P02 Electronics Device Database

Zvinotsanangurwa

• Muenzaniso: PTZ IP Kamera
• Kutevera Basa: Auto Humanoid Tracking
• Zvimwe Zvimiro: Cruise Tracking, Wiper uye Defogging
• Mitauro Inotsigirwa: Chirungu, ChiChinese Chakareruka, ChiChinese Chetsika

[Chikamu 1: Batanidza uye maneja makamera uchishandisa mobile APP]

Ndokumbira uende google play kana Apple chitoro dhawunirodha nharembozha APP, zita rinonzi Videolink uye riise munharembozha yako Kekutanga paunomhanyisa APP, unofanirwa kunyoresa account. Unogona kushandisa email yako kana nharembozha kunyoresa account, wobva washandisa iyo yakanyoreswa account kupinda muAPP.

 Wedzera kamera nekutarisa QR kodhi

Kana kamera yako isina WIFI basa, ndapota batanidza tambo ye ethernet kune yako switch / router uye ubatanidze gadziriso yemagetsi. Sarudza "Wired connection camera", sezvakaratidzwa muFigure 9, isa iyo interface yekutarisa QR kodhi kuti uwedzere kamera, nongedzera nhare mbozha paQR kodhi pane kamera kamera kuti itarise (sezvinoratidzwa muFigure 10), mushure mekutarisa. wabudirira, ndokumbira upe yako Gadzirisa zita rekamera, wodzvanya "BIND IT" kuti upedze kuwedzera (sezvinoratidzwa muFigure 12)

 

 

 Wedzera makamera kuburikidza neLAN yekubatanidza

Kana iyo QR kodhi isingawanikwe pakamera, unogona kudzvanya "Dzvanya pano kuti uwedzere mudziyo" kuti uwedzere kamera kuburikidza nekutsvaga kweLAN (sezvakaratidzwa muMufananidzo 12), pinda peji yekutsvaga, uye APP ichatsvaga kamera, sezvakaratidzwa muFigure 13 kuratidza, uye ipapo baya kamera kuti upedze kuwedzera.

 

Maitiro ekuvhura / kudzima otomatiki humanoid Tracking 

 

Fixed Position Tracking

1. Dzora bhatani rePTZ kutenderedza kamera kune yako yaunoda chinzvimbo (seta Return chinzvimbo)
2. Chinja iyo PTZ control interface kuita "SENIOR" yekuseta interface.
3. Dzvanya bhatani re "Tanga Track", Iyo kamera inozobatidza otomatiki basa rekutevera (Zvichienderana nenzvimbo iripo)
4. Dzvanya bhatani re "Misa Track", kamera inodzima basa rekutevera

Cruise Tracking: 

Usati wabatidza rwendo rwekutevera, unofanirwa kuseta nzvimbo yekamera yekufamba mu "Preset". Iyo yakawanda ye64 preset mapoinzi anogona kusetwa. Aya mapoinzi erwendo ndidzo nzvimbo shoma dzaunoda kutarisa. Iyo kamera ichafamba ichidzoka nekudzoka pakati penzvimbo idzi kuti iwane chinangwa chekutevera. Yakagadzira chaizvo kamera monitors akawanda angles ekuda. Batidza rwendo rwekutevera rwendo, Iyo kamera inotenderera ichifamba nepakati peyakagadzirirwa rwendo nzvimbo. Kana munhu aonekwa, kamera inovhura yekutevera. Mushure mekunge kuronda kwapera, kamera inotangazve rwendo kusvika nguva inotevera munhu aonekwa, yekutevera inovhurwa zvakare.

Set 1,2,3,4….max 64 preset chinzvimbo, Wobva wafonera 98th preset kamera ichabatidza otomatiki yekutevera rwendo. Kuseta nzira: [98]+[Call] yekubatidza rwendo

Wiper uye defogging:

 

Dzvanya "”bhatani rekupukuta paapp, uye kamera inozongobatidza wiper yoramba ichishanda ka3 kubvisa chero tsvina pagirazi.(Kudzokorora kunogona kuitwa.）
Dzvanya"” bhatani re fan riri paAPP rinobva raita kuti fan defogging function. Pese parinobatidzwa, fan inotadza kushanda kweawa imwe chete uye inotsigira gadziriso (maawa 1-1)

Chikamu 2: Wedzera uye maneja makamera uchishandisa PC software

Software kurodha pasi websaiti: http://www.yucvision.com/videolink-Download.html

1. Isa chishandiso chekutsvaga paPC yako
   1. Mhanyai” AjDevTools_V5.1.9_20201215.exe” uye pedzisa kuisa
   2. Mhanya software, sezvinoratidzwa pazasi (4)
   3. Pano iwe unogona kugadzirisa IP kero yekamera, kusimudzira firmware uye mamwe parameter marongero. Tinya-kurudyi paIP kero kuti uvhure kamera nebrowser, sezvakaratidzwa mumufananidzo 5.
   4. Pinda iyo browser login interface, pinda zita remushandisi: admin, password: 123456, sezvakaratidzwa mumufananidzo unotevera (kana browser ichikukurudzira kurodha uye kuisa iyo plug-in, ndapota dhawunirodha uye uiise): Wobva wadzvanya login ， sezvaratidzwa mufananidzo 7
2. Shandisa PC software kutsvaga nekuwedzera makamera(http://www.yucvision.com/upload/file/LMS_install_v5.0.9_20220923(KP).exe)
   1. Isa iyo LMS komputa software. Iyo software inotsigira Chirungu, ChiChinese Chakareruka uye ChiChinese Chechinyakare (kana iwe uchida kutsigira mimwe mitauro, tinogona kukupa mapepa emitauro, unogona kuturikira mumutauro waunoda, uye isu tinogona kukupa iwe kugadzirisa software)
   2. Tevedza zvinokurudzira kuti upedze kuisa software
   3. Mhanya iyo LMS software:mushandisi:admin,password:123456 Dzvanya LOGIN kuti upinde kune software
   4. Tsvaga uye wedzera makamera.Dzvanya "Zvishandiso>""Tanga Kutsvaga">tiya"3">wedzera>wakawedzera zvakabudirira,sezvinoratidzwa pamufananidzo 10.
   5. Wobva wadzvanya"  ” enda kuLiveview, sezvinoratidzwa mumufananidzo 11
      Dzvanya kaviri paIP kero uye vhidhiyo inozongoonekwa mubhokisi revhidhiyo riri kurudyi.
3. Preview uye dzora makamera ane vhidhiyo link PC software
   1. Dzvanya kaviri Videolink PC software mudhairekitori, tevera zvinokurudzirwa kuti upedze kugadzwa kwekamera, wobva wamhanyisa kamera. http://www.yucvision.com/upload/file/Videolink_install_V2.0.0_20230613.exe
   2. kumhanya uye kupinda Videolink,
      Zita rekushandisa nepassword pano ndiyo account yawakanyoresa kekutanga pafoni yako.

Dzvanya bhatani rekupinda enda kuVideolink
Iwe uchaona ese makamera pasi peakaunti yako, unogona preview makamera uye view kutamba kwevhidhiyo nenzira iyi

 

Chikamu 3 【OSD menyu kushanda】

1. Pinda iyo PTZ yekudzora interface, isa makumi masere pane preset chinzvimbo, wobva wadzvanya "Call". Iyo menyu yekutonga ichaonekwa kurudyi rwevhidhiyo.
2. Pa PTZ control interface, tinya iyo    bhatani rekufambisa chitubu chemenu, wobva wadzvanya kuruboshwe   kuita parameter kusarudzwa.
3. Iyo control menu interface ndeyekutevera:

 

 

Chikamu 4 【Basa Kushanda uye Tsananguro】

Tsanangudzo yezita renyanzvi: Zvirongwa/Wedzera:seta, Call:Call preset, [N]+[set]=Pinda N kutanga wobva wadzvanya SET.“+”=Ipapo

1. ,Preset settings
   Tenderedza kamera kusvika panzvimbo yaunoda, wobva waisa nzvimbo iyi kuti “N” preset [N] +[SET] ,N inzvimbo yakafanorongwa, 1-255 nhamba inogona kuve yekusarudza (Asi murairo Preset haubatanidzi). Set= set preset
2. Call preset ( inoda kuseta inoenderana preset poindi) : [N]+[FANIRA] N yepreset point, 1-255 nhamba inogona kuve sarudzo, kamera inogona kuenda kune preset poindi mushure mekufona, Zoom, kutarisa uye aperture lens inongochinja kuita preset paramita, kamera preset kuratidzwa pamonitor.
3. Delete all preset point: [100] +[CALL] ,Call no.100 preset, bvisa zvese preset :[1]+[0]+[0]+[CALL] .
4. Auto scan(Horizontal rotation) [120]+[CALL], fonera No.120,lever ye 360 ​​degree clockwise automatic scanning
   Shandura kumhanya kweAuto scan : [121]+[Set] +[N]+[Set]; (N=1-10; N inomiririra kukurumidza kutariswa muzanatage, default ndeye 8=80%) Kana iwe uchida kushandura kumhanya kweauto scan kuenda ku50%; Kuisa nzira: [121]+[Set] +[5]+[Set]
5. The inspection group programming
   Usati watanga kufamba, unofanira kutanga waisa preset chinzvimbo munzira rwendo.Ndapota tarisai " 3.Preset settings" [101]+[CALL] for Open the first Cruise of 1-64 to scan ;
   Shandura nguva yekugara yeCruise: [123] +[Set] + [N]+[Set]; (N=3-10; N inomiririra nguva yekugara pane yega yega preset, default masekonzi mashanu)
   Kana iwe ukashandura nguva yekugara kusvika kumasekondi gumi. Kuseta nzira:[10]+[Set] + [123]+[Set] Shandura kumhanya kweCruise:[10]+[Set] + [N]+[Set]; (N=115-1; N inomiririra kumhanya kweCruising percecenttage, default ndeye 8 = 80%) Kana iwe ukachinja kumhanya kweCruise kuenda ku40%; Kuseta nzira:[115]+[Set] + [4]+[Set]
6. Kuruboshwe uye kurudyi muganho wekutarisa marongero
   Vashandisi vanogona kuseta kuruboshwe uye kurudyi muganho wepakati muyero yekutenderera, iyo dome yekumhanyisa inogona kudzorera scan mukuseta renji [81]+[SET]: muganhu wekuruboshwe; [82]+[SET]: muganho wekurudyi, [83]+[CALL]: tanga kurudyi uye kuruboshwe muganho scan
   Shandura kumhanya kwekasikisi yekurudyi nekuruboshwe: [141] +[SET]+[N] +[SET]; (N=1-10; N inomiririra kumhanya kweCruising percecenttage, default ndeye 5=50%)
   Kana iwe ukashandura kumhanya kwemuganho scan kusvika ku100%; Kuseta nzira:[141]+[Set] + [10]+[Set]
7. Idle chiito marongero: Iyo kamera inoita rimwe basa mune yekumira mode [131]+[Call]:OFF Idle chinzvimbo set.
   Idle position setting:[131]+[Set]+[N]+[Call],
   N=Basa preset;Kana N=98, kamera Vhura yekutanga Cruise ye1-16 kuti utarise basa. Kuseta nzira:[131]+[SET]+ [98]+[CALL] Seta nguva inotanga chiito chisina basa: [132]+[set]+[N]+[SET]; (N=1-30; N inomiririra Idle nguva, default maminetsi mashanu)
8. Dzosera zvigadziriso zvefekitari zveSpeed ​​​​dome [106]+[Call]+[64]+[CALL] yekudzoreredza PTZ yekumhanyisa dome kugadziriro yefekitori;Setting nzira:[106]+[Call]+[64]+[CALL]

Chikamu 5 Speed ​​​​dome Command Tafura

Command Name	Tsanangudzo yebasa	AIHWA.	Call	Set
Tracking Command
Isa Nzvimbo Yekudzokera	Iyi chinzvimbo ndiyo yekutanga nzvimbo iyo kamera inotanga kuteedzera / iyo otomatiki yekudzoka chinzvimbo aftertracking:88+ set	88		√
Batidza fixed-point tracking	Batidza kuteedzera kwakavakirwa pachinzvimbo chekutanga: 97+ kufona	97	√
Seta yekutevera nguva yekudzoka	Iyo nguva iyo kamera inodzokera otomatiki panzvimbo yekutanga mushure mekunge chinangwa chekutevera chanyangarika:153+set+N+set,N=1-30 seconds, default N=10	153		√
Batidza cruise Tracking	Kamera activation yakavakirwa pane preset chinzvimbo cruise tracking (dzimwe preset nzvimbo dzinoda kuiswa pekutanga (renji: 1-32): 98+ call.	98	√
Dzima Tracking yese	96+ set	96		√
kutevera Bvumira ZOOM	Iyo kamera inongoerekana yaZOOM kana ichitevera: 95+ set (default)	95		√
Kutsvaga ZOOM haisiyo	Iyo kamera haina ZOOM kana ichitevera, 95+ kufona	95	√
Seta yekutevera Pan kumhanya	150+set+N+set,N=1-100,default N=60	150		√
Seta yekutevera Tilt kumhanya	151+set+N+set,N=1-100, default N=50	151		√
Idle chiito
Zvirongwa zvisina basa chiito Batidza otomatiki mushure mekubudirira kuseta	131+set+N+Call; N= Basa rekuraira N=1 Kamera inongogara iri panzvimbo yakagara 1 kana isina basa N=101 Batidza rwendo; N=97 Batidza Fixed tracking N=83 Batidza nharaunda scanning;N=120 Batidza 360°Pan scanning;N=85 Batidza 360°Pan Tracking N=98 Batidza rwendo rwekuronda	131		√
Wiper control (kana ichitsigirwa)	71+ kufona (mushure mekuita kamwe chete, wiper inomira otomatiki mushure mekupukuta 3 nguva, uye inogona kushandiswa kakawanda)	71	√
Defog control	72+ kufona: Gonesa defogging basa. 72+ Settings: Dzima basa rekudzima. Seta nguva yekushanda yekudzima: 73+settings+N+setting, N=1-24 maawa, default N=1 awa	72	√
Defog nguva	Seta nguva yekushanda yekudzima: 73+settings+N+settings, N=1-24 maawa, default N=1 awa(yakavharwa otomatiki mushure me1 awa ye activation)	73		√
OSD Menu control	Yakadanwa ne80+, iyo skrini kamera yekudzora menyu inogona kuvhurwa, uye PTZ control control kiyi inoshandiswa kutenderera uye kuseta.	80	√
General basa kuseta yeSpeed ​​dome
Shandura bhuku rekutonga Pan Speed	160+seti+N+seti,N=1-10,N=Sipeed,default N=5	160		√
Shandura manual control tilt Speed	161+seti+N+seti,N=1-10, N=Sipedhi,default N=5	161		√
360 ° Pan scaning	120+ kufona	120	√
Shandura Pan scaning	121+set +N+set,N=1-10,default N=5	121		√
Area scanning
Seta Kuruboshwe Border	Seta iyo yekuruboshwe chinzvimbo chekutarisa nzvimbo, 81+ set	81		√
Seta Border kurudyi	Seta iyo yekurudyi chinzvimbo chekutarisa nzvimbo, 82+ set	82		√
Batidza nzvimbo scanning	83+ kufona,	83	√
Shandura Area scan speed	Shandura Nharaunda yekumhanyisa kumhanya, 141+set+N+seti,N=1-40, default N=6	141		√
Gadzirisa otomatiki kudzoreredza nguva	126+Set+N+set,N=1-10(miniti),default N=5
Cruise
Batidza rwendo	101+ kufona	101	√
Shandura cruise speed	115+set+N+set,N=1-10,default N=5	115		√
Shandura nguva yekugara parwendo	Chinja nguva yekugara panzvimbo yega yega preset:123+set+N+set,N=1-200 seconds,default N=10	123		√
Batidza speed ratio	iye yakakura iyo ZOOM, iyo inononoka kutenderera kumhanya (default)	108	√
Dzima speed ratio	ZOOM inoshanduka, kumhanya kwekutenderera kunoramba kusina kuchinjwa	108		√
Focus mode setting	Focus mode setting: 250+Set+N+Call,Kana N=1, kamera inongotarisa otomatiki kana ZOOM yatanga Kana N=2, chero chiitiko chePTZ chinokonzeresa chinozongotarisa kamera Kana N=3, shanduko muPTZ kana kufambisa kwemufananidzo kukonzeresa radial base basa autofocus.	107		√
Minimum focus distance setting	Minimum viewing distance setting: 251+Set+N+Call,Apo N=1,hurefu hwekutarisisa nhambwe i1.5 metres Kana N=2,hudiki hwekutarisisa nhambwe i3 metres Kana N=3,hurefu hwekutarisisa nhambwe i6 metres.
Dhonza zvese preset	100+kufona/140+kufona	100	√
Reset speed dome	106+call+64+call	106	√
Reboot LENS uye kumhanya dome	107+set+64+call	107		√

FAQ

• Q: Mangani mapoinzi preset anogona kusetwa yekutevera rwendo?
  A: Kusvika makumi matanhatu nemana preset mapoinzi anogona kusetwa yekutevera rwendo.
• Q: Inguva yakareba sei iyo fan defogging basa inoshanda nekukasira?
  A: Iyo fan defogging basa inotadza kushanda kweawa imwe asi inogona kugadzirwa kuti ishande kwemaawa 1-1.

Zvinyorwa / Zvishandiso

yucvision P02 Electronics Device Database [pdf] Bhuku reMirayiridzo P02, P05, P06, P07, P02 Electronics Device Database, P02, Electronics Device Database, Device Database, Database

References

• User Manual