Installation Instructions
Muenzaniso PM-32
Chirongwa Matrix Module

Tsanangudzo

Iyo purogiramu matrix module PM-32 yakagadzirirwa kupa yakasarudzika / yakawanda yedunhu activation kubva kwakasiyana siyana ekutanga maseketi zvichienderana nemabasa anodiwa anozoitwa pakushanda kwesystem.
Iyo modhi PM-32 inopa makumi matatu nematanhatu (36) ega diode ane akasiyana anode uye cathode terminal yekubatanidza kune yega yega diode. Chero musanganiswa wezvinoiswa diode uye zvinobuda zvinogona kusanganiswa pamwe chete kuti ipe yekuzviparadzanisa nevamwe kana yekudzora mantiki inodiwa neSystem 3™ Control Panel wedunhu. Iyo yakajairika application ingave activation yezvishandiso zvinonzwika pane moto uriri, pasi kumusoro uye pasi pazasi.
Iyo PM-32 module inotora imwe yakajairika module nzvimbo. Mamodule anogona kuve akaiswa kaviri, maviri kune imwe module nzvimbo pazvinenge zvichidikanwa.

Electrical Information

Imwe neimwe inopinza uye inobuda dunhu inokwanisa kutakura ikozvino inosvika .5 Amp @30VDC. Diodes akaiswa pa 200V peak inverse voltaguye).

Installation

1. Isa iyo module kune yakachinjika yekumisikidza mabhuraketi mune yekudzora yakavharirwa.
2. Isa iyo Model JA-5 (5 muhurefu) bhazi yekubatanidza tambo yekubatanidza pakati pechigadziko P2 chemodule uye chigadziko P1 chemodule kana control panel pakarepo inoitangira mubhazi.
   Cherechedza: Kana iyo yakapfuura module iri pane imwe mutsara mune yakavharirwa, iyo JA-24 (24 muhurefu) bhazi yekubatanidza tambo yekubatanidza ichadikanwa.
3. Mamodules anofanirwa kuve akabatana nebhazi kubva kurudyi kuenda kuruboshwe. Kune mitsara miviri yakavharidzirwa, ma modules mumutsara wezasi anofanira kubatanidzwa kubva kuruboshwe kuenda kurudyi. Mitsara inoteedzana inofanirwa kuve yakabatana, kurudyi kuenda kuruboshwe, kuruboshwe kuenda kurudyi, nezvimwe.
4. Kana module iri iyo yekupedzisira module musystem, isa ingave JS-30 (30 mukureba) kana JS-64 (64 muhurefu) bhazi rekubatanidza gungano kubva pane isina kushandiswa yekugamuchira module yekupedzisira kune terminal 41 yeCP-35. control panel. Izvi zvinopedzisa iyo module yekutarisa dunhu.
5. Waya dunhu (s) sekutsanangurwa kwazvinoitwa muCP-35 Control Panel Instruction Manual (P/N 315-085063) Kuiswa uye Wiring. Tarisa kune iyo Wiring mufananidzo.
   Cherechedza: Kana nzvimbo ikasashandiswa, mudziyo weEOL unofanirwa kubatana nearamu inotanga matunhu ematunhu 2 ne3 (Zone 1) kana 4 uye 5 (Zone 2) yemodule.
6. Kana imwe yekuwedzera relay module, annunciator, kana imwe inobuda module ikashandiswa, ipapo maaramu anobuda, materminals 1 (Zone 1) uye 6 (Zone 2), anofanirwa kubatana kune aya mayunitsi.

Wiring Test
Tarisa kuCP-35 Control Panel Instruction Manual, Kuisa uye Wiring.

Chaizvoizvo Wiring

MAZANO
Minimum waya saizi: 18 AWG
Yakakura waya saizi: 12 AWG

Iyo kambani Siemens Industry, Inc.
Kuvaka Tekinoroji Chikamu Florham Park, NJ
P / N 315-024055-5
Siemens Building Technologies, Ltd.
Kuchengetedza Moto & Chengetedzo Zvigadzirwa 2 Kenview Boulevard
Brampton, Ontario
L6T 5E4 Canada
P / N 315-024055-5

Zvinyorwa / Zvishandiso

SIEMENS PM-32 Chirongwa Matrix Module [pdf] Bhuku reMirayiridzo PM-32 Chirongwa Matrix Module, PM-32, Chirongwa Matrix Module, Matrix Module, Module

References

• User Manual