Secure
Mvura Meter Sensor
SKU: SEC_SWM301
Quickstart
Izvi a
Smart Meter
nokuti
Europe.
Kumhanyisa mudziyo uyu ndapota isa nyowani 1 * 3V Lithium mabhatiri.
Ndapota iva nechokwadi chokuti bhatiri remukati rakazara zvakakwana.
Chishandiso chinokwana muMvura Meter kubva kuSensus (http://sensusesaap.com/). Kuti usimbise kusanganisirwa uye kusabatanidzwa isa magineti padivi rakafuratira re sensor kwemasekonzi matatu kusvika iyo tsvuku LED yave kupenya. Kutumira NIF kana kumutsa mudziyo tevera maitiro mamwe chete.
Ruzivo rwakakosha rwekuchengetedza
Ndapota verenga bhuku rino zvakanyatsonaka. Kutadza kutevedzera zvinokurudzirwa mubhuku rino kunogona kuve nenjodzi kana kutyora mutemo.
Mugadziri, mutengesi, muparidzi uye mutengesi haazove nemhosva yekurasikirwa kana kukuvadzwa kunokonzerwa nekutadza kutevedzera mirairo iri mubhuku rino kana chero chimwe chinhu.
Shandisa midziyo iyi kune chinangwa chayo chete. Tevera mirairo yekurasa.
Usarase midziyo yemagetsi kana mabhatiri mumoto kana pedyo nenzvimbo dzekupisa dzakavhurika.
Chii chinonzi Z-Wave?
Z-Wave ndiyo yepasirese isina waya protocol yekutaurirana muSmart Home. Izvi
mudziyo wakakodzera kushandiswa munharaunda yakataurwa muchikamu che Quickstart.
Z-Wave inovimbisa kutaurirana kwakavimbika nekusimbisa meseji yese (nzira mbiri
kutaurirana) uye ese mains powered node anogona kuita seanodzokorora mamwe ma node
(meshed network) kana iyo inogamuchira isiri yakananga isina waya renji ye
transmitter.
Ichi chishandiso uye chimwe nechimwe chakasimbiswa Z-Wave chishandiso chinogona kuva kushandiswa pamwe chete nezvimwe
yakasimbiswa Z-Wave mudziyo zvisinei nerudzi uye kwaakabva chero bedzi ari maviri akakodzera kune
zvakafanana frequency range.
Kana mudziyo unotsigira kukurukurirana kwakachengeteka ichataurirana nemimwe michina
yakachengeteka chero bedzi chigadziro ichi chinopa imwechete kana yakakwirira yehutano.
Zvikasadaro zvinongoerekana zvashanduka kuita yakaderera mwero wekuchengetedza kuchengetedza
kumashure kugarisana.
Kuti uwane rumwe ruzivo nezve Z-Wave tekinoroji, zvishandiso, machena mapepa nezvimwe ndapota tarisa
kune www.z-wave.info.
Product Description
SWM 301 ibheteri-powered RF module inoshandisa Z-Wave”® tekinoroji yekushuma mita yemvura kubva kuSENSUS mita yemvura (http://sensusesaap.com/). Iyo RF module inorekodha kuverenga kwemamita nekudzosera-yemahara kunhonga parita vhiri rerejista yemamita uye inoendesa iyo data pamusoro peZ-Wave network ingave panguva kana delta shanduko. Sarudza nzvimbo ichaiswa iyo unit, dzivirira nzvimbo dziri padivi kana kuseri kwenzvimbo huru dzesimbi dzinogona kukanganisa masaini eredhiyo ane simba-pasi pakati peyuniti neMutungamiriri. Iyo unit ine lithium bhatiri iro rinopa makore gumi ehupenyu hwebhatiri zvichienderana ne10hr yekubika nguva.
Gadzirira Kuisa / Reset
Ndapota verenga bhuku rekushandisa usati waisa chigadzirwa.
Kuti ubatanidze (wedzera) mudziyo weZ-Wave kune network inofanira kunge iri mufekitari default
state. Ndokumbirawo muve nechokwadi chekuseta zvakare mudziyo mufekitari default. Unogona kuita izvi ne
kuita basa reKusabatanidzwa sezvinotsanangurwa pazasi mubhuku rekushandisa. Yese Z-Wave
controller inokwanisa kuita oparesheni iyi asi zvinokurudzirwa kushandisa yekutanga
mutongi weiyo yapfuura network kuti ave nechokwadi chekuti mudziyo wacho hauna kubatanidzwa nemazvo
kubva kune network iyi.
Yambiro Yekuchengetedza kune Mabhatiri
Chigadzirwa chacho chine mabhatiri. Ndapota bvisa mabhatiri kana mudziyo usingashandisi.
Usasanganise mabhatiri emhando yekuchaja yakasiyana kana mhando dzakasiyana.
Installation
Ingo dzvanya sensor mune chinzvimbo padivi pemamita digit kuratidza. Chishandiso chinokwana muMvura Meter kubva kuSensus (http://sensusesaap.com/). Inogona zvakare kushanda kune vamwe vanogadzira metres asi izvi hazvitsigirwe nemugadziri.
Kubatanidzwa/Kusabatanidzwa
Pafekitori default mudziyo hausi weZ-Wave network. Chishandiso chinoda
kuva yakawedzerwa kune iripo isina waya network kutaurirana nemidziyo yetiweki iyi.
Iyi nzira inodaidzwa Kubatanidzwa.
Midziyo inogona zvakare kubviswa kubva kunetiweki. Iyi nzira inodaidzwa Kusabatanidzwa.
Maitiro ese ari maviri anotangwa neyekutanga controller yeZ-Wave network. Izvi
controller inoshandurwa kuita yekusabatanidzwa inoenderana inclusion mode. Kubatanidzwa uye Kusabatanidzwa ndiko
obva aita kuita yakakosha yemanyorero chiito pamudziyo.
Kubatanidzwa
Kuti usimbise kusanganisirwa uye kusabatanidzwa isa magineti padivi rakafuratira re sensor kwemasekonzi matatu kusvika iyo tsvuku LED ichipenya.
Kusabatanidzwa
Kuti usimbise kusanganisirwa uye kusabatanidzwa isa magineti padivi rakafuratira re sensor kwemasekonzi matatu kusvika iyo tsvuku LED ichipenya.
Kushandiswa Kwechigadzirwa
Iko kuverenga kwemamita kunofambiswa newaya uye inogona kuverengerwa nechero Z-Wave controller.
Node Information Frame
Iyo Node Information Frame (NIF) ibhizinesi kadhi remuchina weZ-Wave. Rine
ruzivo nezve rudzi rwechigadzirwa uye kugona kwehunyanzvi. Kubatanidzwa uye
kusabatanidzwa kwechishandiso kunosimbiswa nekutumira Node Ruzivo Frame.
Padivi peizvi zvinogona kudikanwa kune mamwe mabasa etiweki kutumira Node
Information Frame. Kuburitsa NIF ita zvinotevera:
Isa magineti padivi rakafuratira re sensor kwemasekonzi matatu kusvika iyo tsvuku LED ichipenya. Meta yemvura inozotumira NIF mushure memasekonzi gumi nemashanu.
Kukurukurirana kumudziyo wekurara (Wakeup)
Chishandiso ichi chinoshandiswa nebhatiri uye chinoshandurwa kuita hope dzakadzika nguva zhinji
kuchengetedza hupenyu hwebhatiri nguva. Kukurukurirana nemudziyo kunogumira. Kuti uzo
kutaurirana nemudziyo, static controller C inodiwa mumambure.
Mutongi uyu anochengetedza bhokisi retsamba remidziyo inoshandiswa nebhatiri uye chitoro
mirairo isingagamuchirwe panguva yehope huru. Pasina mutongi akadaro,
kutaurirana kunogona kuve kusingaite uye / kana hupenyu hwebhatiri nguva yakanyanya
yakaderera.
Chishandiso ichi chinomuka nguva nenguva uye kuzivisa kumuka
state nekutumira inonzi Wakeup Notification. Mutongi anogona ipapo
bvisa bhokisi retsamba. Nokudaro, chigadziro chinoda kugadziriswa nezvinodiwa
nguva yekumuka uye node ID yemutongi. Kana mudziyo wakabatanidzwa ne
a static controller uyu controller anowanzo kuita zvese zvinodiwa
configurations. Nguva yekumuka ndeye tradeoff pakati pemaximal bhatiri
nguva yehupenyu uye mhinduro dzinodiwa dzechigadzirwa. Kuti umutse mudziyo ndapota ita
chiito chinotevera:
Kuti umutse chishandiso isa magineti padivi re sensor kwemasekonzi matatu kusvika iyo tsvuku LED ichipenya.
Kukurumidza dambudziko kupfura
Heano mashoma mazano ekuisa network kana zvinhu zvikasashanda sezvaitarisirwa.
- Ita shuwa kuti mudziyo uri mufekitori reset mamiriro usati wasanganisira. Mukupokana usabvisa pamberi sanganisira.
- Kana kusanganisirwa kuchiri kutadza, tarisa kana zvese zvishandiso zvinoshandisa ma frequency akafanana.
- Bvisa zvese zvakafa kubva kumasonganiro. Zvikasadaro uchaona kunonoka kwakanyanya.
- Usamboshandisa bhatiri midziyo yekurara isina yepakati controller.
- Usavhote FLIRS zvishandiso.
- Ita shuwa kuti une yakakwana mains powered mudziyo kuti ubatsirwe kubva kune meshing
Kushamwaridzana - imwe mudziyo inodzora imwe mudziyo
Z-Wave zvishandiso zvinodzora zvimwe Z-Wave zvishandiso. Ukama pakati pemudziyo mumwe
kudzora mumwe mudziyo kunonzi kushamwaridzana. Kuti udzore zvakasiyana
mudziyo, mudziyo unodzora unofanirwa kuchengetedza runyoro rwemidziyo inogashira
kudzora mirairo. Aya mazita anonzi mapoka ekubatana uye anogara aripo
zvine chekuita nezvimwe zviitiko (semuenzaniso bhatani rakadzvanywa, sensor trigger, ...). Zvikazo
chiitiko chinoitika ese maturusi akachengetwa muboka rekubatana achaita
gamuchira imwechete isina waya yekuraira isina waya, kazhinji iyo 'Basic Set' Command.
Mapoka eMasangano:
Nhamba YebokaMaximum NodesDescription
| 1 | 2 | Node dzekugamuchira kusingakumbirwe kwemamita emvura kuverenga |
| 2 | 2 | Manodhi ekugamuchira asina kukumbirwa yakaderera bhatiri yambiro ripoti |
Configuration Parameters
Z-Wave zvigadzirwa zvinofanirwa kushanda kunze kwebhokisi mushure mekuiswa, zvisinei
kumwe kugadziridzwa kunogona kugadzirisa basa zvirinani kune zvinodiwa nemushandisi kana kuvhura mberi
kuvandudzwa maitiro.
ZVINOKOSHA: Vadzori vanogona chete kubvumidza kugadzirisa
dzakasaina tsika. Kuti uise kukosha muhuwandu 128 ... 255 kukosha kwakatumirwa mukati
chikumbiro chichava kukosha kunodiwa kubvisa 256. For example: Kuisa a
parameter kusvika 200  ingangodiwa kuseta kukosha kwe200 minus 256 = minus 56.
Kana iri mbiri yebhayiti kukosha kwakafanana kunoshanda: Values yakakura kupfuura 32768 inogona
inoda kupihwa sehunhu husina kunaka zvakare.
Parameter 1: Yakaunganidzwa Kukosha Kwekunyoresa
inoratidza iyo chaiyo counter ye sensor
Saizi: 4 Byte, Default Value: 0
SettingDescription
| 0-99999999 | Kukosha - kuverenga chete |
Parameter 2: Kuverengera Kubika Nguva
kakawanda sei kuverenga kwemamita kunoshumwa
Saizi: 2 Byte, Default Value: 1440
SettingDescription
| 1-43200 | muminiti |
Parameter 3: Delta Configuration Reading
inotsanangura shanduko shoma kusvika kukosha kwemamita kutsva kwataurwa
Saizi: 2 Byte, Default Value: 0
SettingDescription
| 0-10000 | m”³/Hr |
Parameter 4: Serial Number Mvura Meter
Saizi: 4 Byte, Default Value: 0
SettingDescription
| 00000000 - FFFFFFFF | Nhamba yeSeri - kuverenga chete |
Parameter 5: Serial Number Z-Wave Module
muFomati YYMMxxxx ine YYY segore, MM semwedzi uye xxx seid
Saizi: 4 Byte, Default Value: 0
SettingDescription
| 00000000 - FFFFFFFF | Nhamba yeSeri - kuverenga chete |
Technical Data
| Kurema | 40 gr |
| Hardware Platform | ZM3102 |
| EAN | 5015914845017 |
| IP Kirasi | IP54 |
| Bhatiri Type | 1 * 3V Lithium |
| Device Type | Smart Meter |
| Firmware Shanduro | 03.00 |
| Z-Wave Vhezheni | 03.2a |
| Chitupa ID | ZC08-13080017 |
| Z-Wave Chigadzirwa Id | 0x0059.0x000f.0x0001 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission simba | 5 mW |
Inotsigirwa Command Classes
- Bhatiri
- Basic
- Muka
- Kushamwaridzana
- Version
- Manufacturer Specific
- Configuration
- Switch Multilevel
- Meter
- Switch Alarm
Tsanangudzo yeZ-Wave chaiyo mazwi
- Controller - iri Z-Wave mudziyo une kugona kubata network.
Ma controller anowanzo magedhi, Remote Controls kana bhatiri rinoshandiswa madziro controller. - Muranda - iri Z-Wave chishandiso chisina kugona kubata network.
Varanda vanogona kunge vari masensa, actuators uye kunyange kure kure. - Primary Controller - ndiye murongi wepakati wetiweki. Zvinofanira kuva
controller. Panogona kuve nemutongi mumwe chete wekutanga muZ-Wave network. - Kubatanidzwa - ndiyo maitiro ekuwedzera michina mitsva yeZ-Wave mune network.
- Kusabatanidzwa - ndiyo maitiro ekubvisa Z-Wave zvishandiso kubva kunetiweki.
- Kushamwaridzana - hukama hwekutonga pakati pemudziyo unodzora uye
mudziyo unodzorwa. - Wakeup Chiziviso -imeseji yakakosha isina waya yakapihwa neZ-Wave
mudziyo wekuzivisa unokwanisa kutaura. - Node Information Frame -imeseji yakakosha isina waya inoburitswa nea
Z-Wave mudziyo kuzivisa kugona kwayo uye mabasa.
