Phason FC-1T-1VAC-1F Variable Speed ​​Fan uye Fixed-Stage Heater Controller 

FC-1T-1VAC-1F bhuku rekushandisa

Iyo FC-1T-1VAC-1F inodzora tembiricha mukamuri nekugadzirisa kumhanya kwemafeni ekumhanya kwakasiyana uye kudzora chinovharira hita. Kana tembiricha iri panzvimbo yakatarwa, iyo FC-1T-1VAC-1F inoshandisa mafeni panzvimbo yekumhanya isina basa uye hita yakadzimwa. Kana tembiricha ikadarika iyo yakatarwa, kutonga kunowedzera kukurumidza kwemafeni. Kana tembiricha inodonha pazasi penzvimbo yakatarwa, kutonga kunovhara mafeni (mukuvhara-kudzima mode) kana kushanda mafeni nekumhanya kusingaite (isiyo mode) uye switch pane hita. Ona exampkutanga papeji 3.

Features

• ne variable speed output
• ne heater interlock kubuda
• Otomatiki yekuvhara-kudzima uye isingabatsiri modes
• Adjustable off setback for shut-off mode
• Inogadziriswa idle kumhanya kune idle mode
• Adjustable tembiricha set point
• Adjustable tembiricha musiyano
• Matatu-masekondi akazara-simba-batidza-kudzikisa kuderedza fan ice-up
• Madhiji maviri e LED kuratidza
• Fahrenheit uye Celsius kuratidza
• Kukanganisa kodhi kuratidza kugadzirisa dambudziko
• Fuse yekudzivirira yakawandisa
• Six-foot tembiricha probe (inowedzerwa)
• Yakarukwa, NEMA 4X yakavharirwa (inodzivirira corrosion, inodzivirira mvura, uye inodzivirira moto)
• CSA mvumo
• Makore maviri-mashoma warandi

Installation

Switch DZIMA simba riri patsime risati rabatanidza waya dzemagetsi dzinopinda. USA shandura pamagetsi kusvikira wapedza wiring yese uye waona kuti midziyo yese yakanyatsobatanidzwa uye haina zvipingamupinyi.

Magetsi ratings

Input	120/230 VAC, 50/60 Hz
Variable stage	10 A pa 120/230 VAC, general-chinangwa (resistive) 7 FLA pa120/230 VAC, PSC mota 1/2 HP pa120 VAC, 1 HP pa230 VAC, PSC mota
Variable stage fuse	15 A, 250 VAC ABC-mhando zvedongo
Heater relay	10 A pa 120/230 VAC, general-chinangwa (resistive) 1/3 HP pa120 VAC, 1/2 HP pa230 VAC 360 W tungsten pa120 VAC

Iyo FLA (yakazara mutoro ampere) rating account yekuwedzera kwemota yazvino kudhirowa kana mota ichishanda iri pasi pekumhanya kwakazara. Ita shuwa kuti mota / midziyo yakabatana kune inoshanduka stage haitore zvinopfuura 7 FLA.

Zadza tafura iri pazasi kubatsira kugadzirisa kutonga kwako uye kuona kuti haupfuure zviyero zvemagetsi.

Fans	A) Yakanyanya kudhirowa ikozvino pa fan	B) Nhamba yevateveri	Yese yazvino kudhirowa = A × B
Make
ModelVoltage chiyero
Simba chinhu
Heater kana choto	Maximum ikozvino dhirowa	Voltage chiyero
Make
Model

Iyo heater interlock inobuda ndeye yakajairika-yakavhurika relay yekubata iyo inochinja hita kana choto kubatidza nekudzima. Mabatiro erelay anovhara kana tembiricha iri 2°F pazasi penzvimbo yakatarwa. Shandisa macontactor emagetsi pakupisa kwemagetsi kana kupisa lamps. Batanidza zvakananga kune akawanda gasi mavira.

1. Seta vhoriyamutage chinja kunzvimbo chaiyo yemutsara voltage yakashandiswa, 120 kana 230 VAC.
2. Batanidza waya sezvakaratidzwa mudhayagiramu.

   

Off setback mode example 

TSP: 80°F DIFF: 6°F OSB: 5°F IDLE: 20%

1. Fani inenge yadzimwa uye chinovharira hita chinenge chakabatidzwa kana tembiricha iri pasi pe75°F.
2. Kana tembiricha yawedzera kusvika 75°F (OSB) feni inoshanda nekumhanya kwakazara kwemasekonzi matatu, yozomhanya isingaite (minimum ventilation ye20%). Iyo feni icharamba isingaite pakati pe75°F ne80°F.
3. Pa 78°F heater interlock inodzima.
4. Pakati pe80°F ne86°F (DIFF), kukurumidza kwefan kunoshanduka zvakaenzanirana netembiricha. Kana tembiricha ikawedzera, kukurumidza kwe fan kunowedzera. Kana tembiricha ikadzikira, kukurumidza kwe fan kunoderera.
5. Iyo feni inoshanda nekumhanya kukuru kana tembiricha iri kana kupfuura 86°F.

Idle mode example

1. Pazasi pe78°F heater inopindirana ichave yakabatidzwa.
2. Iyo feni inoshanda nekumhanya kusina basa (20% yemhepo yakanyanya) kana tembiricha iri pasi pe80°F.
3. Pakati pe80°F ne86°F (DIFF) kukurumidza kwefan kunoshanduka zvakaenzanirana netembiricha. Kana tembiricha ikawedzera, kukurumidza kwe fan kunowedzera. Kana tembiricha ikadzikira, kukurumidza kwe fan kunoderera.
4. Iyo fan inoshanda nekumhanya kwakanyanya kana tembiricha iri kana kupfuura 86 ° F (yakanyanya kufefetera).

Tanga

Kana iyo control ichikwira: 

1. 88 icharatidza kwe 0.25 seconds (kutanga-up).
2. 00 icharatidza kwesekondi 1 (kuzviongorora).
3. 60 icharatidza kwesekondi 1. Iyo 60 inoreva kuti frequency ndeye 60 Hz.
4. Chiratidziro chichapenya pakati pekushisa uye PF (simba kupera). Dzvanya switch iri kurudyi kuti ubvise meseji.

Ratidza chenjedzo

	Iyo tembiricha sensor tambo ine pfupi inotenderera.
	Iyo tembiricha sensor yakakuvadzwa kana waya yekubatanidza yakaputswa.
	Iyo Temperature knob yakatenderedzwa. Iyo inoratidzira ichachinja t S uye ambient tembiricha. Iyo control haigamuchire iyo nyowani kusvika switch yadzvanya kunzvimbo yakaseti. OR Iyo voltage switch yakaiswa ku230 asi simba rinouya i120 volts. Ita shuwa kuti voltage switch iri munzvimbo chaiyo.
	Pave nekutadza kwemagetsi. Chiratidziro chichapenya pakati pekushisa neP F. Dzvanya chinja chiri kurudyi kuti ubvise message

Programming

Madimburiko

TSP – tembiricha set point DIFF – musiyano OSB - kubva pakudzokera shure IDLE – idle speed

Defaults uye mitsara 

Parameter	Code	Range	Kuiswa kwefekitari	Nzvimbo
°F kana °C (ambient tembiricha)		-22 kusvika 99°F (–30 kusvika 38°C)	°F	Internal jumper
TSP		32 kusvika 99°F (0 kusvika 38°C)	N/A	External knob
DIFF		1 kusvika 20°F (0.6 kusvika 12°C)	6°F	Internal trimmer
OSB		0 kusvika 16°F (0 kusvika 9°C)	5°F	Internal trimmer
IDLE		0 - 99%	N/A	External knob

Chinja mabasa

Chinja chinzvimbo	Function
CENTER		Inoratidza ambient tem
RUDYI		Inokutendera kuti udaro view uye gadzirisa tembiricha set point Inodzima ma alarm
RUBOSHWE		Inokutendera kuti udaro view uye gadzirisa mutsauko, kubvisa kudzoreredza, uye kumhanyisa kumhanya. Pese painodzvanywa switch uye yakabatwa munzvimbo iyi, inotevera parameter inoratidzwa. Iyo inoratidzira inopenya pakati peiyo parameter kodhi (mavara maviri) uye yakasetwa

Kuchinja tembiricha kuratidza zvikamu

Iyo °F/°C jumper inokuita kuti usarudze kana control ichiratidza tembiricha mumadhigirii Fahrenheit kana Celsius. Kuti uchinje marongero, isa jumper sezvakaratidzwa.

Hysteresis

Hysteresis inobatsira kudzivirira kukuvadzwa kwekutonga uye michina yakabatana nayo nekuvadzivirira kubva pakubatidza nekudzima nekukurumidza kana tembiricha iri kutenderera pedyo nenzvimbo yakatarwa.
Iyo FC-1T-1VAC-1F ine 1°F (0.5°C) hysteresis. Izvi zvinoreva kuti fan ichadzima pa1 ° F pazasi penzvimbo yayakabatidza. For example, kana tembiricha yekuseta iri 75°F, feni inobatidza pa75°F, ichidzima pa74°F.

Off setback (OSB)

OSB ndiyo nhamba yemadhigirii pazasi petembiricha set point (TSP) iyo fan inochinja pakati pekudzima nekusaita. Idle modhi inopa hushoma kufefetera pane tembiricha pazasi peTSP. Ona exampiri papeji 3.

Kugadzirisa OSB

1. Dzvanya switch kurudyi kuti utange pakutanga kweiyo parameter list.
2. Dzvanya switch kuruboshwe kaviri wobva wabata. Chiratidziro chinopenya pakati peOS negadziriro. Kana ichiratidza, kutonga kuri mukuita zvisina basa.
3. Shandisa diki diki screwdriver kugadzirisa yemukati trimmer kuenda kune yaunoda OSB kana kutendeutsa chigadziriso chizere newachi kuti uise chidzoro mumodhi isina basa.
   

Minimum ventilation muOSB mode

1. Panofanira kunge paine tembiricha yakabatana usati wagadzirisa kufefetera kushoma.
2. Turn the KUSIMBEDZA KWEMAZWI knob zvizere kupesana-newachi uye wozodzokera 1/4-shandura wachi.
3. Dzvanya kavha yekumberi chinja kurudyi uye bata uchitenderedza iyo TEMPERATURE knob zvizere neclockwise wobva wasunungura switch. Iyo fan haifanirwe kunge ichimhanya
4. Dzvanya kavha yekumberi chinja kurudyi wobata uchitenderedza TEMPERATURE knob zvishoma nezvishoma. Kana feni ichimhanya zvakazara, sunungura chivharo chekumberi uye TEMPERATURE knob.
5. Iyo fan inomhanya zvakanyanya kweanosvika masekonzi matatu, yobva yachinja kuita idle sipidhi. Iyo TEMPERATURE knob inofanira kunge iri 1°F yakakwirira kudarika tembiricha.
6. Zvishoma nezvishoma gadzirisa IDLE SPEED knob kusvika kumhanya kunogutsa kwasvika. A voltmeter inobatsira pakusarudza voltage. Kana usina chokwadi, ona fan yako inotengesera kune shoma shoma idle voltage ye fan yako mota.
7. Dzvanya chivharo chekumberi kurudyi uye gadzirisa TEMPERATURE knob kune tembiricha yaunoda.
8. Sunungura switch

Minimum ventilation muIDLE mode

1. Shandura iyo IDLE SPEED knob zvizere zvinopesana newachi.
2. Dzvanya kavha yekumberi chinja kurudyi wobata uchitenderedza TEMPERATURE knob zvizere newachi wobva wasunungura switch. Iyo feni inofanirwa kunge ichimhanya isina basa.
3. Zvishoma nezvishoma gadzirisa iyo IDLE SPEED knob kusvika inogutsa isingaite kumhanya yasvika. A voltmeter inobatsira pakusarudza voltage. Kana usina chokwadi, ona fan yako inotengesera kune shoma shoma idle voltage ye fan yako mota.
4. Bata chivharo chekumberi kurudyi wozogadzirisa TEMPERATURE knob kune tembiricha yaunoda.
5. Sunungura switch.

Idle kumhanya (IDLE)

Idle speed is a percenttage yekumhanya kwakanyanya uye inozivikanwawo sekushomeka kwemhepo. Ona exampiri papeji 4.

Kugadzirisa kumhanya kusina basa

1. Dzvanya switch kurudyi kuti utange pakutanga kweiyo parameter list.
2. Dzvanya chinjikira kuruboshwe kanokwana kana wobva wabata. Chiratidziro chinopenya pakati pežd nekuseta.
3. Gadzirisa iyo KUSIMBEDZA KWEMAZWI knob pabutiro remberi kune inodiwa fan speed.
4. Sunungura switch

Temperature set point (TSP)

TSP ndiyo tembiricha inodiwa. Iri zvakare rengedzo yeiyo off setback (OSB) uye tembiricha musiyano (DIFF) marongero.

Kugadzirisa TSP 

1. Dzvanya chinja kurudyi uye bata.
2. Gadzirisa iyo TEMPERATURE knob kune yaunoda kuseta

Iwe unofanirwa kubata switch munzvimbo yakatarwa uchishandura iyo TEMPERATURE knob. Kana izvi zvikasaitwa nemazvo, chiratidziro chinopenya pakati pe t S uye tembiricha yekuratidzira, zvichiratidza kuti knob yakashandurwa netsaona. Iyo control haigamuchire iyo nyowani kusvika switch yadzvanya kurudyi.

Kusiyanisa kwetembiricha (DIFF)

DIFF ndiyo nhamba yemadhigirii pamusoro peTSP iyo fan inosvika pakumhanya kukuru. For example, kana TSP 80°F uye DIFF iri 6°F, fani inozowedzera kubva pakusaita basa pa80°F kusvika pakunyanya kumhanya pa86°F.

Kuratidza uye kugadzirisa DIFF

1. Dzvanya switch kurudyi kuti utange pakutanga kweiyo parameter list.
2. Dzvanya switch iri kuruboshwe kamwe wobva wabata. Chiratidziro chinopenya pakati pe diand kuseta.
3. Shandisa diki flat screwdriver kugadzirisa mukati memukati.

Simba chinhu

Musiyano wemagetsi emagetsi zvinhu zvinogona kuita kuti musiyano chaiwo uve wakaderera pane yakaratidzwa kukosha. Kana iyo simba chinhu chemota chiripo, shandisa manhamba ekugadzirisa uye fomula pazasi kuverenga iyo DIFF chaiyo yekumisikidza.

Simba chinhu	1.0	0.9	0.8	0.7	0.6	0.5
Kugadziriswa (°F)	1.00	1.05	1.10	1.25	1.33	1.60

CHAIKO AKASIYANA = ANODIWA AKASIYANA + KURURAMA 

Example 1 

Kuti uve nemusiyano chaiwo we6°F ine mota ine simba re 0.7, isa musiyano kusvika 7.5°F. 6°F  1.25 = 7.5°F

Example 2 

Kuti uve nemusiyano chaiwo we5°F ine mota ine simba re 0.5, isa musiyano kusvika 8.0°F. 5°F  1.6 = 8.0°F

Kana iwe usingazivi simba rekuita, verenga kururamisa sezvinotevera:

1. Seta iyo isingashande kumhanya. Ona Minimum ventilation muIDLE modhi pane peji 7 yemaitiro akakodzera.
2. Gadzirisa musiyano kusvika 10 ° F nemudziyo wemukati. Ziva tembiricha (T1) muchiratidziro chedhijitari.
3. Dzvanya uye ubate switch kurudyi uye gadzirisa TSP kuti ienzane tembiricha kubva padanho 2. Iyo fan inoshanda pamusoro pekukurumidza kusingaite.
4. Zvishoma nezvishoma kuderedza TSP uye teerera kune kuwedzera kwekukurumidza kwe fan. Kana mota yasvika kumhanya kuzere, cherechedza tembiricha set point (T2).
5. Verenga kururamisa uchishandisa fomula: CORRECTION = 10°F ÷ (T2 – T1)

Example 3
Kune tembiricha yeT1 ye75 ° F uye T2 tembiricha ye82 ° F, verenga kururamisa nenzira inotevera:
10°F ÷ (82°F-75°F) = 1.43

Kana musiyano waunoda uri 5°F, verenga musiyano chaiwo unotevera: 5°F + 1.43 = 7.15°F.

Isa musiyano kusvika 7°F kuitira musiyano chaiwo we5°F.

Zvinyorwa / Zvishandiso

Phason FC-1T-1VAC-1F Variable Speed ​​Fan uye Fixed-Stage Heater Controller [pdf] User Manual FC-1T-1VAC-1F Variable Speed ​​Fan uye Fixed-Stage Heater Controller, FC-1T-1VAC-1F, Variable Speed ​​​​Fan uye Fixed-Stage Heater Controller, Speed ​​​​Fan uye Fixed-Stage Heater Controller, Yakagadziriswa-Stage Heater Controller, Stage Heater Controller, Heater Controller, Controller

References

• User Manual