Zviri mukati hide

1 Ecolink Intelligent Technology

2 Z-Wave Plus Smart Switch - Double Rocker

2.1 SKU: DDLS2-ZWAVE5

2.2 Quickstart

2.3 Ruzivo rwakakosha rwekuchengetedza

2.4 Chii chinonzi Z-Wave?

2.5 Product Description

2.6 Gadzirira Kuisa / Reset

2.6.1 Dzorera kufekitari default

2.7 Kubatanidzwa/Kusabatanidzwa

2.7.1 Kubatanidzwa

2.7.2 Kusabatanidzwa

2.8 Kukurumidza dambudziko kupfura

2.9 Kushamwaridzana - imwe mudziyo inodzora imwe mudziyo

2.9.1 Mapoka eMasangano:

2.10 Technical Data

2.11 Inotsigirwa Command Classes

2.12 Tsanangudzo yeZ-Wave chaiyo mazwi

2.12.1 References

2.13 Related Posts

Ecolink Intelligent Technology

Z-Wave Plus Smart Switch - Double Rocker

SKU: DDLS2-ZWAVE5

Chii chinonzi Z-Wave?

Z-Wave ndiyo yepasirese isina waya protocol yekutaurirana muSmart Home. Izvi
mudziyo wakakodzera kushandiswa munharaunda yakataurwa muchikamu che Quickstart.

Z-Wave inovimbisa kutaurirana kwakavimbika nekusimbisa meseji yese (nzira mbiri
kutaurirana) uye ese mains powered node anogona kuita seanodzokorora mamwe ma node
(meshed network) kana iyo inogamuchira isiri yakananga isina waya renji ye
transmitter.

Ichi chishandiso uye chimwe nechimwe chakasimbiswa Z-Wave chishandiso chinogona kuva kushandiswa pamwe chete nezvimwe
yakasimbiswa Z-Wave mudziyo zvisinei nerudzi uye kwaakabva chero bedzi ari maviri akakodzera kune
zvakafanana frequency range.

Kana mudziyo unotsigira kukurukurirana kwakachengeteka ichataurirana nemimwe michina
yakachengeteka chero bedzi chigadziro ichi chinopa imwechete kana yakakwirira yehutano.
Zvikasadaro zvinongoerekana zvashanduka kuita yakaderera mwero wekuchengetedza kuchengetedza
kumashure kugarisana.

Kuti uwane rumwe ruzivo nezve Z-Wave tekinoroji, zvishandiso, machena mapepa nezvimwe ndapota tarisa
kune www.z-wave.info.

Product Description

Gadzirisa mwenje wepamusoro, tafura lamps kana zvimwe zvinhu neEcolink Z-Wave Plus Smart Switch. Zviri nyore kuisa mumaminitsi nekubvisa iripo switch plate uye nekuisa iyi pane switch. Hapana chikonzero chekubata chero magetsi wiring.Features Kuisa nekukurumidza, hapana chikonzero chekuwana yakakwirira voltagwaya Inoenderana neese Z-wave certified hubs & controllers Inochengetedza bhuku rekutonga rekuchinja Senses ikozvino mamiriro ekuchinja Inoshanda negeng rimwe chete Rocker mhando switch.

Gadzirira Kuisa / Reset

Ndapota verenga bhuku rekushandisa usati waisa chigadzirwa.

Kuti ubatanidze (wedzera) mudziyo weZ-Wave kune network inofanira kunge iri mufekitari default
state. Ndokumbirawo muve nechokwadi chekuseta zvakare mudziyo mufekitari default. Unogona kuita izvi ne
kuita basa reKusabatanidzwa sezvinotsanangurwa pazasi mubhuku rekushandisa. Yese Z-Wave
controller inokwanisa kuita oparesheni iyi asi zvinokurudzirwa kushandisa yekutanga
mutongi weiyo yapfuura network kuti ave nechokwadi chekuti mudziyo wacho hauna kubatanidzwa nemazvo
kubva kune network iyi.

Dzorera kufekitari default

Ichi chishandiso chinobvumirawo kusetwa patsva pasina kubatanidzwa kweZ-Wave controller. Izvi
nzira inofanirwa kushandiswa chete kana iyo yekutanga controller isingashande.

Factory DefaultChishandiso cheZ-Wave Plus chinobva chagadziriswa fekitori kana chabviswa kubva kunetiweki yeZ-Wave Plus. Ndokumbira ushandise maitiro aya chete kana network yekutanga controller isipo kana neimwe nzira isingashande.

Kubatanidzwa/Kusabatanidzwa

Pafekitori default mudziyo hausi weZ-Wave network. Chishandiso chinoda
kuva yakawedzerwa kune iripo isina waya network kutaurirana nemidziyo yetiweki iyi.
Iyi nzira inodaidzwa Kubatanidzwa.

Midziyo inogona zvakare kubviswa kubva kunetiweki. Iyi nzira inodaidzwa Kusabatanidzwa.
Maitiro ese ari maviri anotangwa neyekutanga controller yeZ-Wave network. Izvi
controller inoshandurwa kuita yekusabatanidzwa inoenderana inclusion mode. Kubatanidzwa uye Kusabatanidzwa ndiko
obva aita kuita yakakosha yemanyorero chiito pamudziyo.

Kubatanidzwa

Netiweki KusanganisirwaZ-Wave Plus Smart Switch inofanirwa kuwedzerwa kunetiweki yeZ-Wave Plus isati yashandiswa. Kuisa mudziyo munetiweki zvese mudziyo netiweki controller zvinofanirwa kunge zviri muinclusion mode panguva imwe chete. Tarisa kumirairo inopihwa nemugadziri wemugadziri wako kuti uwane mamwe mashoko ekutanga macontroller inclusion mode.1) Ona kuti Z-Wave Plus controller yauri kushandisa inopindirana neZ-Wave Plus Smart Switch.2) Isa Z yako -Wave Plus Controller into add (inclusion) mode.3) Dzvanya bhatani rekubatanidza / kusabvisa paZ-Wave Plus Smart Switch.4) LED iri mberi kwechikwata ichadzima kana yakabudirira kuiswa mune network.

Kusabatanidzwa

Network Exclusion1) Chero Z-Wave Plus Chishandiso chinogona kubviswa kubva kune chero Z-Wave Plus controller. Tevedzera madhairekitori kuti uise Z-Wave Plus Controller yako mumodhi yekusabatanidzwa.2) Dzvanya bhatani rekubatanidza / kusabvisa paZ-Wave Plus Smart Switch.

Kukurumidza dambudziko kupfura

Heano mashoma mazano ekuisa network kana zvinhu zvikasashanda sezvaitarisirwa.

1. Ita shuwa kuti mudziyo uri mufekitori reset mamiriro usati wasanganisira. Mukupokana usabvisa pamberi sanganisira.
2. Kana kusanganisirwa kuchiri kutadza, tarisa kana zvese zvishandiso zvinoshandisa ma frequency akafanana.
3. Bvisa zvese zvakafa kubva kumasonganiro. Zvikasadaro uchaona kunonoka kwakanyanya.
4. Usamboshandisa bhatiri midziyo yekurara isina yepakati controller.
5. Usavhote FLIRS zvishandiso.
6. Ita shuwa kuti une yakakwana mains powered mudziyo kuti ubatsirwe kubva kune meshing

Kushamwaridzana - imwe mudziyo inodzora imwe mudziyo

Z-Wave zvishandiso zvinodzora zvimwe Z-Wave zvishandiso. Ukama pakati pemudziyo mumwe
kudzora mumwe mudziyo kunonzi kushamwaridzana. Kuti udzore zvakasiyana
mudziyo, mudziyo unodzora unofanirwa kuchengetedza runyoro rwemidziyo inogashira
kudzora mirairo. Aya mazita anonzi mapoka ekubatana uye anogara aripo
zvine chekuita nezvimwe zviitiko (semuenzaniso bhatani rakadzvanywa, sensor trigger, ...). Zvikazo
chiitiko chinoitika ese maturusi akachengetwa muboka rekubatana achaita
gamuchira imwechete isina waya yekuraira isina waya, kazhinji iyo 'Basic Set' Command.

Mapoka eMasangano:

Nhamba YebokaMaximum NodesDescription

Technical Data

Inotsigirwa Command Classes

• Sangano Grp Info
• Sangano V2
• Basic
• Bhatiri
• Device Reset Local
• Manufacturer Specific
• Powerlevel
• Chinja Binary
• Shanduro V2
• Zvaveplus Info V2

Tsanangudzo yeZ-Wave chaiyo mazwi

• Controller - iri Z-Wave mudziyo une kugona kubata network.
  Ma controller anowanzo magedhi, Remote Controls kana bhatiri rinoshandiswa madziro controller.
• Muranda - iri Z-Wave chishandiso chisina kugona kubata network.
  Varanda vanogona kunge vari masensa, actuators uye kunyange kure kure.
• Primary Controller - ndiye murongi wepakati wetiweki. Zvinofanira kuva
  controller. Panogona kuve nemutongi mumwe chete wekutanga muZ-Wave network.
• Kubatanidzwa - ndiyo maitiro ekuwedzera michina mitsva yeZ-Wave mune network.
• Kusabatanidzwa - ndiyo maitiro ekubvisa Z-Wave zvishandiso kubva kunetiweki.
• Kushamwaridzana - hukama hwekutonga pakati pemudziyo unodzora uye
  mudziyo unodzorwa.
• Wakeup Chiziviso -imeseji yakakosha isina waya yakapihwa neZ-Wave
  mudziyo wekuzivisa unokwanisa kutaura.
• Node Information Frame -imeseji yakakosha isina waya inoburitswa nea
  Z-Wave mudziyo kuzivisa kugona kwayo uye mabasa.