KUDZORA neWEB X-401W Dual Relay uye Input Module

Zvinotsanangurwa

• Muenzaniso: X-401W
• Magetsi: Vin+ Vin- Vout Gnd
• Factory Default Settings:
  • IP Kero: 192.168.1.2
  • Subnet Mask: 255.255.255.0
  • Kudzora Peji Web Kero: http://192.168.1.2
  • Dzora password: (hapana password yakaiswa)
  • Setup Peji Web Kero: http://192.168.1.2/setup.html
  • Seta Username: admin
  • Gadzira password: web relay (ese madiki kesi)

Mirayiridzo Yekushandiswa Kwechigadzirwa

Basic Setup Matanho

1. Simba module uye batanidza kuburikidza ne ethernet kune komputa.
2. Isa iyo IP kero pakombuta kune imwecheteyo network semodule (semuenzaniso, 192.168.1.50). Rangarira kudzoreredza zvigadziriso zvekombuta mushure mekugadzirisa.
3. Kuti ugadzirise module, vhura a web browser uye pinda: http://192.168.1.2/setup.html
4. Mune General Settings pasi peWiFi, isa iyo WiFi marongero.
5. Ipa iyo module kero yekusingaperi yeIP kana kugonesa DHCP.
6. Tangazve module kuti zvigadziriso zvitange kushanda.

Pinout Dhizaini

Power Supply Input + Power Supply Input – Vin – 0.7V (kana 11V ine POE) Ground (yakajairwa) In1+ Optically-Isolated Input 1 + In1In2+ Optically-Isolated Input 1 Optically-Isolated Input 2+ In21C 1NC 1NOC Solated Optically 2NOC Input 2Relay 2 common Relay 2 Kazhinji Yakavharwa Relay 1 Kazhinji Open Relay 1 Common Relay 1 Kazhinji Yakavharwa Relay 2 Kazhinji Open

FAQ

• Q: Ndingaite sei kuti ndigadzirise iyo module kune fekitori default marongero?
• A: Kuti ugadzirise zvakare moduli kune zvigadziriso zvefekitori, pinda peji yekuseta web kero (http://192.168.1.2/setup.html), pinda uchishandisa zita rekushandisa nepassword, uye tsvaga sarudzo yekumisikidza kufekitori defaults.
• Q: Ndinoshandura sei zvigadziriso zveWiFi zvemodule?
• A: Kuti uchinje iyo WiFi marongero emodule, pinda peji yekuseta web kero (http://192.168.1.2/setup.html) uye famba uchienda kune General Settings pasi peWiFi kwaunogona kupinda nekugadzirisa iyo WiFi marongero sezvinodiwa.

Basic Setup Matanho

1. Simba module uye batanidza kuburikidza ne ethernet kune komputa.
2. Isa iyo IP kero pakombiyuta kune imwecheteyo network se module.
3. Kuti ugadzirise module, vhura iyo web browser uye pinda: http://192.168.1.2/setup.html
4. Mune General Settings pasi peWiFi, isa iyo WiFi marongero.
5. Ipa iyo module kero yekusingaperi yeIP kana kugonesa DHCP.
6. Tangazve module kuti zvigadziriso zvitange kushanda.

Factory Default Settings

• IP Kero: 192.168.1.2
• Subnet Mask: 255.255.255.0
• Kudzora Peji Web Kero: http://192.168.1.2
• Dzora password: (hapana password yakaiswa)
• Setup Peji Web Kero: http://192.168.1.2/setup.html Gadzira Zita rekushandisa: admin
• Gadzira password: web relay (ese madiki madiki)

Pinout Dhizaini

• Power Supply Input +
• Power Supply Input -
• Vin - 0.7V (kana 11V ine POE)
• Ground (common)
• Optically-Isolated Input 1 +
• Optically-Isolated Input 1 -
• Optically-Isolated Input 2+
• Optically-Isolated Input 2-
• Relay 1 Common
• Relay 1 Kazhinji Yakavharwa
• Relay 1 Kazhinji Open
• Relay 2 Common
• Relay 2 Kazhinji Yakavharwa
• Relay 2 Kazhinji Open

CONYTACT

• www.ControlByWeb.com/support
• www.ControlByWeb.com
• 1681 West 2960 South, Nibley, UT 84321, USA

Zvinyorwa / Zvishandiso

KUDZORA neWEB X-401W Dual Relay uye Input Module [pdf] Installation Guide X-401W Dual Relay uye Input Module, X-401W, Dual Relay uye Input Module, Relay uye Input Module, Input Module, Module

References

• User Manual