CONTROL los ntawmWEB X-401W Dual Relay thiab Input Module
Specifications
- Qauv: X-401 W
- Fais fab mov: Vin+ Vin- Vout Gnd
- Factory Default Settings:
- IP Chaw Nyob: 192.168.1.2
- Subnet Mask: 255.255.255.0
- Tswj nplooj ntawv Web Chaw nyob: http://192.168.1.2
- Tswj Password: (tsis muaj lo lus zais)
- Teeb tsa nplooj Web Chaw nyob: http://192.168.1.2/setup.html
- Teeb Username: admin
- Teeb Password: web relay (tag nrho cov ntaub ntawv qis)
Cov lus qhia siv khoom
Cov kauj ruam teeb tsa yooj yim
- Fais fab lub module thiab txuas ntawm ethernet rau lub computer.
- Teeb tus IP chaw nyob ntawm lub computer mus rau tib lub network raws li lub module (xws li, 192.168.1.50). Nco ntsoov rov qab teeb tsa lub computer tom qab teeb tsa.
- Txhawm rau teeb tsa lub module, qhib a web browser thiab nkag mus: http://192.168.1.2/setup.html
- Hauv General Chaw nyob hauv WiFi, nkag mus rau qhov chaw WiFi.
- Muab lub module rau qhov chaw nyob IP mus tas li lossis pab DHCP.
- Rov pib lub module rau cov kev teeb tsa kom siv tau.
Pinout Daim duab
Cov Khoom Siv Hluav Taws Xob + Cov Khoom Siv Hluav Taws Xob - Vin - 0.7V (lossis 11V nrog POE) Hauv av (ntau) In1 + Optically-Isolated Input 1 + In1In2 + Optically-Isolated Input 1 Optically-Isolated Input 2+ In21C 1NC 1NO 2C 2NC-solated Input 2Relay 2 common Relay 1 Nquag Kaw Relay 1 Nquag Qhib Relay 1 Common Relay 2 Nquag Kaw Relay 2 Nquag Qhib
FAQ
- Q: Kuv tuaj yeem rov pib dua qhov module rau lub Hoobkas qhov chaw teeb tsa li cas?
- A: Txhawm rau rov pib dua lub module rau lub Hoobkas teeb tsa, nkag mus rau nplooj ntawv teeb tsa web chaw nyob (http://192.168.1.2/setup.html), nkag mus nrog lub teeb username thiab password, thiab nrhiav qhov kev xaiv kom rov pib dua lub Hoobkas.
- Q: Kuv yuav hloov qhov teeb tsa WiFi ntawm lub module li cas?
- A: Txhawm rau hloov WiFi teeb tsa ntawm lub module, nkag mus rau nplooj ntawv teeb tsa web chaw nyob (http://192.168.1.2/setup.html) thiab mus rau General Chaw nyob hauv WiFi qhov twg koj tuaj yeem nkag mus thiab hloov kho cov chaw WiFi raws li xav tau.
Cov kauj ruam teeb tsa yooj yim
- Fais fab lub module thiab txuas ntawm ethernet rau lub computer.
- Teem tus IP chaw nyob ntawm lub computer mus rau tib lub network raws li lub module.(Ex: 192.168.1.50) Nco tseg: rov qab kho lub computer tom qab teeb tsa.
- Txhawm rau teeb tsa lub module, qhib lub web browser thiab nkag mus: http://192.168.1.2/setup.html
- Hauv General Chaw nyob hauv WiFi, nkag mus rau qhov chaw WiFi.
- Muab lub module rau qhov chaw nyob IP mus tas li lossis pab DHCP.
- Rov pib lub module rau cov kev teeb tsa kom siv tau.
Factory Default Settings
- IP Chaw Nyob: 192.168.1.2
- Subnet Mask: 255.255.255.0
- Tswj nplooj ntawv Web Chaw nyob: http://192.168.1.2
- Tswj Password: (tsis muaj lo lus zais)
- Teeb tsa nplooj Web Chaw nyob: http://192.168.1.2/setup.html Teeb Username: admin
- Teeb Password: web relay (txhua tus lej)
Pinout Daim duab
- Fais fab mov tswv yim +
- Fais fab mov Input -
- Vin - 0.7V (los yog 11V nrog POE)
- Hauv av (common)
- Optically-isolated Input 1 +
- Optically cais tawm tswv yim 1 -
- Optically-isolated Input 2+
- Optically Isolated Input 2-
- Relay 1 Common
- Relay 1 Nquag kaw
- Relay 1 Nquag Qhib
- Relay 2 Common
- Relay 2 Nquag kaw
- Relay 2 Nquag Qhib
KEV PAB CUAM
- www.ControlByWeb.com/support
- www.ControlByWeb.com
- 1681 West 2960 South, Nibley, UT 84321, USA
Cov ntaub ntawv / Cov ntaub ntawv
 |
CONTROL los ntawmWEB X-401W Dual Relay thiab Input Module [ua pdf] Daim ntawv qhia kev teeb tsa X-401W Dual Relay thiab Input Module, X-401W, Dual Relay thiab Input Module, Relay thiab Input Module, Input Module, Module |