ARDUINO AKX00034 Edge Control Muridzi
Tsanangudzo
Iyo Arduino® Edge Control board yakagadzirirwa kugadzirisa zvinodiwa zvekurima chaiko. Inopa yakaderera simba rekudzora system, yakakodzera kudiridza ine modular yekubatanidza. Kushanda kwebhodhi iri kunokwidziridzwa neArduino® MKR Mabhodhi kuti ipe imwe yekubatanidza.
Nzvimbo dzakatariswa
Zviyero zvekurima, smart irrigation systems, hydroponics
Features
Nina B306 Module
processor
- 64 MHz Arm® Cortex®-M4F (ine FPU)
- 1 MB Flash + 256 KB RAM
Wireless
- Bluetooth (BLE 5 kuburikidza neCordio® stack) Advertising Extensions
- 95dBm kunzwa
- 4.8 mA muTX (0 dBm)
- 4.6 mA muRX (1 Mbps)
Peripherals
- Yakazara-kumhanya 12 Mbps USB
- Arm® CryptoCell® CC310 chengetedzo subsystem QSPI/SPI/TWI/I²S/PDM/QDEC
- High kumhanya 32 MHz SPI
- Quad SPI interface 32 MHz
- 12-bit 200 ksps ADC
- 128 bit AES/ECB/CCM/AAR co-processor
Memory
- 1 MB yemukati Flash memory
- 2MB paQSPI
- SD Kadhi slot
Simba
- Low Power
- 200uA Kurara ikozvino
- Inogona kushanda kusvika kumwedzi makumi matatu nemana pabhatiri re34V/12Ah
- 12 V Acid/lead SLA Battery Supply (Yakachajwazve nema solar panel) RTC CR2032 Lithium Battery back up
Bhatiri
- LT3652 Solar Panel Battery Charger
- Input Supply Voltage Regulation Loop yePeak Power Tracking mu (MPPT) Solar applications
I/O
- 6x edge sensitive kumutsa pini
- 16x hydrostatic watermark sensor yekupinda
- 8x 0-5V analogi yekupinda
- 4x 4-20mA zvinopinza
- 8x latching relay command inobuda nevatyairi
- 8x latching relay yekuraira zvinobuda pasina vatyairi
- 4x 60V/2.5A galvanically yakasarudzika yakasimba state relay
- 6x 18 pini plug mune terminal block connectors
Dual MKR Socket
- Individual simba kutonga
- Individual Serial Port
- Mumwe nomumwe I2C ports
Safety information
- Kirasi A
The Board
Application Examples
Iyo Arduino® Edge Control ndiyo gedhi rako reKurima 4.0. Wana chaiyo-nguva nzwisiso yemamiriro ekuita kwako uye wedzera goho rezvirimwa. Kuvandudza kushanda kwebhizinesi kuburikidza neotomatiki uye kurima kwekufungidzira. Gadzirisa iyo Edge Kudzora kune zvaunoda nekushandisa maviri eArduino® MKR Mabhodhi uye akasiyana eShields anowirirana. Chengetedza marekodhi enhoroondo, otomatiki kutonga kwemhando, shandisa kuronga zvirimwa, uye nezvimwe kuburikidza neArduino IoT Cloud kubva chero kupi zvako pasirese.
Automated Greenhouses
Kuti uderedze kuburitsa kabhoni uye kuwedzera goho rehupfumi, zvakakosha kuve nechokwadi kuti nharaunda yakanakisa inopihwa mukukura kwezvirimwa maererano nehunyoro, tembiricha, nezvimwe zvinhu. Iyo Arduino® Edge Control ipuratifomu yakabatanidzwa inogonesa kutarisa kure uye chaiyo-nguva optimization kusvika kumagumo. Kusanganisira Arduino® MKR GPS Shield (SKU: ASX00017) inobvumira kuronga kutenderedzwa kwembesa uye kutorwa kwedata re geospatial.
Hydroponics / Aquaponics
Sezvo hydroponics ichisanganisira kukura kwezvirimwa pasina ivhu, kutarisirwa kwakapfava kunofanirwa kuchengetedzwa kuti ive nechokwadi chekuti vanochengeta hwindo rakatetepa rinodiwa pakukura kwakanyanya. Iyo Arduino Edge Control inogona kuve nechokwadi chekuti hwindo iri rinowanikwa nekushomeka kwemaoko basa. Aquaponics inogona kupa mamwe mabhenefiti pane akajairwa hydroponics kwairi iyo Arduino®'s Edge Control inogona kubatsira kuenzanisa zvakatonyanya zvinodiwa nekupa kutonga kurinani pamusoro pemaitiro emukati uku ichizodzikisa njodzi dzekugadzira.
Kurimwa kwehowa: Howa hunozivikanwa nekuda kwekushisa kwakakwana uye hunyoro hwemamiriro ekuchengetedza kukura kwespore ukuwo uchidzivirira kukwikwidza fungi kukura. Kutenda kune akawanda watermark sensors, kubuda kwechiteshi, uye sarudzo dzekubatanidza dziripo paArduino® Edge Control pamwe neArduino® IoT Cloud, uku kurima chaiko kunogona kuwanikwa padanho risati ramboitika.
Accessories.
- Irometer Tensiometers
- Watermark ivhu mwando sensors
- Mechanized bhora mavharuvhu
- Solar panel
- 12V/5Ah asidhi/lead SLA bhatiri (11 – 13.3V)
Related Products
- LCD Ratidza + Flat Cable + purasitiki yakavharirwa
- 1844646 Phoenix contacts (inosanganisirwa nechigadzirwa)
- Arduino® MKR mhuri mabhodhi (yekuwedzera isina waya yekubatanidza)
Solution Overview
Example yeyakajairika application yemhinduro inosanganisira LCD Display uye maviri Arduino® MKR 1300 mabhodhi.
Ratings
Absolute Maximum Ratings
| Symbol | Tsanangudzo | Min | Typ | Max | Unit |
| TMax | Maximum thermal limit | -40 | 20 | 85 | °C |
| VBattMax | Kunonyanyisa chiyero voltage kubva pakuiswa kwebhatiri | -0.3 | 12 | 17 | V |
| VSolarMax | Kunonyanyisa chiyero voltage kubva kune solar panel | -20 | 18 | 20 | V |
| ARelayMax | Maximum ikozvino kuburikidza nerelay switch | - | - | 2.4 | A |
| PMax | Kunyanya Kushandisa Simba | - | - | 5000 | mW |
Yakakurudzirwa Operating Conditions
| Symbol | Tsanangudzo | Min | Typ | Max | Unit |
| T | Conservative thermal limits | -15 | 20 | 60 | °C |
| VBatt | Kuisa voltage kubva pakuiswa kwebhatiri | - | 12 | - | V |
| VSolar | Kuisa voltage kubva kune solar panel | 16 | 18 | 20 | V |
Inoshanda Pamusoroview
Board Topology
Top View
| Ref. | Tsanangudzo | Ref. | Tsanangudzo |
| U1 | LT3652HV bhatiri charger IC | J3,7,9,8,10,11 | 1844798 pluggable terminal blocks |
| U2 | MP2322 3.3V buck converter IC | LED1 | Pabhodhi LED |
| U3 | MP1542 19V inosimudzira inoshandura IC | PB1 | Reset pushbutton |
| U4 | TPS54620 5V inosimudzira inoshandura IC | J6 | Micro SD Kadhi |
| U5 | CD4081BNSR UYE gedhi IC | J4 | CR2032 bhatiri inobata |
| U6 | CD40106BNSR KWETE gedhi IC | J5 | Micro USB (NINA Module) |
| U12,U17 | MC14067BDWG multiplexer IC | U8 | TCA6424A IO inowedzera IC |
| U16 | CD40109BNSRG4 I/O Expander | U9 | NINA-B306 Module |
| U18,19,20,21 | TS13102 solid state relay IC | U10 | ADR360AUJZ-R2 Voltage reference series 2.048V IC |
| Ref. | Tsanangudzo | Ref. | Tsanangudzo |
| U11 | W25Q16JVZPIQ Flash 16M IC | Q3 | ZXMP4A16GTA MOSFET P-CH 40V 6.4A |
| U7 | CD4081BNSR UYE gedhi IC | U14, 15 | MC14067BDWG IC MUX |
processor
Iyo Main processor ndeye Cortex M4F inomhanya kusvika ku64MHz.
LCD skrini
Iyo Arduino® Edge Control inopa yakazvitsaurira yekubatanidza (J1) yekupindirana neHD44780 16 × 2 LCD kuratidza module, inotengeswa zvakasiyana. Iyo huru processor inodzora LCD kuburikidza neTCA6424 port expander pamusoro peI2C. Data inotamiswa pamusoro pe 4-bit interface. LCD backlight intensity zvakare inogadziriswa neiyo main processor.
5V Analog Sensors
Kusvika sere 0-5V analog mapipu anogona kubatana neJ4 yekupindirana analog sensors senge tensiometers uye dendrometers. Zvinopinza zvinodzivirirwa ne19V Zener diode. Kupinza kwega kwega kwakabatana kune analog multiplexer iyo inofambisa chiratidzo kune imwechete ADC port. Kupinza kwega kwega kwakabatana neanalog multiplexer (MC14067) inofambisa chiratidzo kune imwechete ADC port. Iyo huru processor inodzora kusarudzwa kwekuisa kuburikidza neTCA6424 port expander pamusoro peI2C.
4-20mA Sensors
Anosvika mana 4-20mA sensors anogona kubatana neJ4. Chirevo voltage ye19V inogadzirwa neMP1542 nhanho-kumusoro inoshandura kuti ipe simba loop iripo. Iyo sensor kukosha inoverengwa kuburikidza ne220 ohm resistor. Kupinza kwega kwega kwakabatana neanalog multiplexer (MC14067) inofambisa chiratidzo kune imwechete ADC port. Iyo huru processor inodzora kusarudzwa kwekuisa kuburikidza neTCA6424 port expander pamusoro peI2C.
Watermark Sensors
Kusvika gumi nematanhatu hydrostatic watermark sensors inogona kubatana neJ8. Pini J8-17 uye J8-18 ndiwo akajairika sensor pini kune ese ma sensors, anodzorwa zvakananga neiyo microcontroller. Zvinopinza uye zvakajairika sensor pini zvinodzivirirwa ne19V Zener diode. Kupinza kwega kwega kwakabatana neanalog multiplexer (MC14067) inofambisa chiratidzo kune imwechete ADC port. Iyo huru processor inodzora kusarudzwa kwekuisa kuburikidza neTCA6424 port expander pamusoro peI2C. Bhodhi rinotsigira 2 maitiro chaiwo.
Latching Outputs
Zvibatanidza J9 uye J10 zvinopa zvinobuda kune latching zvishandiso senge mavharuvhu ane mota. Iyo latching inobuda ine mbiri mbiri (P uye N) iyo iyo impulse kana strobe inogona kutumirwa mune chero ye2 chiteshi (kuvhura vharavha yekuvhara ye ex.ample). Iyo nguva ye strobes inogona kugadzirwa kuti igadzirise kune yekunze mudziyo zvinodiwa. Bhodhi rinopa huwandu hwe16 latching ports yakakamurwa mumhando mbiri:
- Latching mirairo (J10): 8 ports ye yakakwira impedance yekupinda (max +/- 25 mA). Batanidza kune ekunze midziyo ine yechitatu-bato dziviriro / simba maseketi. Inotarirwa kuVBAT.
- Latching Out (J9): 8 ports. Izvi zvinobuda zvinosanganisira vatyairi veiyo latching mudziyo. Hapana vatyairi vekunze vanodiwa. Inotarirwa kuVBAT.
Solid State Relays
Bhodhi inoratidzira ina inogadzirika 60V 2.5A yakasimba nyika inotenderera ine galvanic yekuzviparadzanisa inowanikwa muJ11. Yakajairika maapplication anosanganisira HVAC, sprinkler control nezvimwe.
Storage
Iro bhodhi rinosanganisira zvese microSD kadhi socket uye imwe yekuwedzera 2MB flash memory yekuchengetedza data. Ose ari maviri akabatana zvakananga kune main processor kuburikidza neSPI interface.
Muti Wesimba
Bhodhi rinogona kufambiswa nemagetsi ezuva uye/kana mabhatiri eSLA.
Board Operation
Kutanga - IDE
Kana iwe uchida kuronga Arduino® Edge Control yako uripo iwe unofanirwa kuisa iyo Arduino® Desktop IDE [1] Kuti ubatanidze Arduino® Edge control pakombuta yako, unozoda Micro-B USB tambo. Izvi zvinopawo simba kubhodhi, sezvinoratidzwa ne LED.
Kutanga - Arduino Web Editor
Ese mabhodhi eArduino®, kusanganisira iyi, anoshanda kunze kwebhokisi paArduino® Web Mharidzo [2], nekungoisa plugin iri nyore. Iyo Arduino® Web Mharidzo inotambirwa pamhepo, saka ichagara ichienderana neazvino maficha uye rutsigiro rwemabhodhi ese. Tevedza [3] kutanga kukodha pabrowser uye kurodha zvikeche zvako pabhodhi rako.
Kutanga - Arduino IoT Cloud
Zvese zvigadzirwa zvinogoneswa zveArduino® IoT zvinotsigirwa paArduino® IoT Cloud iyo inokutendera kuti utore, girafu uye uongorore sensor data, kukonzeresa zviitiko, uye otomatiki imba yako kana bhizinesi.
Sample Sketches
Sample sketches yeArduino® Edge Control inogona kuwanikwa mu "Examples" menyu muArduino® IDE kana muchikamu che "Documentation" cheArduino® Pro. webnzvimbo [4]
Online Resources
Zvino zvawapfuura nepakati pezvaunogona kuita nebhodhi iwe unogona kuongorora iyo isingaperi mikana yainopa nekutarisa inonakidza mapurojekiti paProjektiHub [5], iyo Arduino® Library Reference [6] uye online chitoro [7] uko. iwe unozokwanisa kuzadzisa bhodhi rako nemasensor, actuators uye nezvimwe.
Board Recovery
Ese mabhodhi eArduino® ane yakavakirwa-mukati bootloader inobvumira kupenya bhodhi kuburikidza ne USB. Kana sketch yakavhara processor uye bhodhi haichasvikike zvakare kuburikidza ne USB zvinokwanisika kuisa bootloader modhi nekudzvanya kaviri bhatani reset ipapo mushure mesimba kumusoro.
Chidimbu Pinouts
J1 LCD Chibatanidza
| Pin | Function | Type | Tsanangudzo |
| 1 | PWM | Simba | Backlight LED Cathode (PWM control) |
| 2 | Power On | Digital | Kupinza bhatani |
| 3 | +5V LCD | Simba | LCD simba rekupa |
| 4 | LCD RS | Digital | LCD RS chiratidzo |
| 5 | Kusiyanisa | Analogi | LCD Contrast control |
| 6 | LCD RW | Digital | LCD Kuverenga / Nyora chiratidzo |
| 7 | LED+ | Simba | Backlight LED Anode |
| 8 | LCD EN | Digital | LCD Inogonesa chiratidzo |
| 10 | LCD D4 | Digital | LCD D4 chiratidzo |
| 12 | LCD D5 | Digital | LCD D5 chiratidzo |
| 14 | LCD D6 | Digital | LCD D6 chiratidzo |
| 16 | LCD D7 | Digital | LCD D7 chiratidzo |
| 9,11,13,15 | GND | Simba | Ground |
J3 Muka masaini / Ekunze Relay Mirairo
| Pin | Function | Type | Tsanangudzo |
| 1,3,5,7,9 | V BAT | Simba | Gated voltage bhatiri rekumutsa chiratidzo chechiratidzo |
| 2,4,6,8,10,12 | Input | Digital | Edge sensitive kumutsa masaini |
| 13 | Output | Digital | Yekunze solid state relay wachi chiratidzo 1 |
| 14 | Output | Digital | Yekunze solid state relay wachi chiratidzo 2 |
| 17 | Bidir | Digital | Yekunze yakasimba state relay data chiratidzo 1 |
| 18 | Bidir | Digital | Yekunze yakasimba state relay data chiratidzo 2 |
| 15,16 | GND | Simba | Ground |
J5 USB
| Pin | Function | Type | Tsanangudzo |
| 1 | VUSB | Simba | Power Supply Input Note: Bhodhi rinofambiswa chete neV USB harigone kugonesa akawanda maficha ebhodhi. Tarisa muti wesimba muChikamu 3.8 |
| 2 | D- | Kusiyana | USB data rakasiyana - |
| 3 | D+ | Kusiyana | USB data rakasiyana + |
| 4 | ID | NC | Zvisina kushandiswa |
| 5 | GND | Simba | Ground |
J7 Analog/4-20mA
| Pin | Function | Type | Tsanangudzo |
| 1,3,5,7 | +19V | Simba | 4-20mA voltage reference |
| 2 | IN1 | Analogi | 4-20mA kuisa 1 |
| 4 | IN2 | Analogi | 4-20mA kuisa 2 |
| 6 | IN3 | Analogi | 4-20mA kuisa 3 |
| 8 | IN4 | Analogi | 4-20mA kuisa 4 |
| 9 | GND | Simba | Ground |
| 10 | +5V | Simba | 5V yakabuda ye0-5V analog reference |
| 11 | A5 | Analogi | 0-5V kuisa 5 |
| 12 | A1 | Analogi | 0-5V kuisa 1 |
| 13 | A6 | Analogi | 0-5V kuisa 6 |
| 14 | A2 | Analogi | 0-5V kuisa 2 |
| 15 | A7 | Analogi | 0-5V kuisa 7 |
| 16 | A3 | Analogi | 0-5V kuisa 3 |
| 17 | A8 | Analogi | 0-5V kuisa 8 |
| 18 | A4 | Analogi | 0-5V kuisa 4 |
J8 Watermark
| Pin | Function | Type | Tsanangudzo |
| 1 | MvuraMrk1 | Analogi | Watermark yekupinda 1 |
| 2 | MvuraMrk2 | Analogi | Watermark yekupinda 2 |
| 3 | MvuraMrk3 | Analogi | Watermark yekupinda 3 |
| 4 | MvuraMrk4 | Analogi | Watermark yekupinda 4 |
| 5 | MvuraMrk5 | Analogi | Watermark yekupinda 5 |
| 6 | MvuraMrk6 | Analogi | Watermark yekupinda 6 |
| 7 | MvuraMrk7 | Analogi | Watermark yekupinda 7 |
| 8 | MvuraMrk8 | Analogi | Watermark yekupinda 8 |
| 9 | MvuraMrk9 | Analogi | Watermark yekupinda 9 |
| 10 | MvuraMrk10 | Analogi | Watermark yekupinda 10 |
| 11 | MvuraMrk11 | Analogi | Watermark yekupinda 11 |
| 12 | MvuraMrk12 | Analogi | Watermark yekupinda 12 |
| 13 | MvuraMrk13 | Analogi | Watermark yekupinda 13 |
| 14 | MvuraMrk14 | Analogi | Watermark yekupinda 14 |
| Pin | Function | Type | Tsanangudzo |
| 15 | MvuraMrk15 | Analogi | Watermark yekupinda 15 |
| 16 | MvuraMrk16 | Analogi | Watermark yekupinda 16 |
| 17,18 | VCOMMON | Digital | Sensor common voltage |
J9 Latching Out (+/- VBAT)
| Pin | Function | Type | Tsanangudzo |
| 1 | PULSE_OUT0_P | Digital | Latching yakabuda 1 yakanaka |
| 2 | PULSE_OUT0_N | Digital | Latching yakabuda 1 negative |
| 3 | PULSE_OUT1_P | Digital | Latching yakabuda 2 yakanaka |
| 4 | PULSE_OUT1_N | Digital | Latching yakabuda 2 negative |
| 5 | PULSE_OUT2_P | Digital | Latching yakabuda 3 yakanaka |
| 6 | PULSE_OUT2_N | Digital | Latching yakabuda 3 negative |
| 7 | PULSE_OUT3_P | Digital | Latching yakabuda 4 yakanaka |
| 8 | PULSE_OUT3_N | Digital | Latching yakabuda 4 negative |
| 9 | PULSE_OUT4_P | Digital | Latching yakabuda 5 yakanaka |
| 10 | PULSE_OUT4_N | Digital | Latching yakabuda 5 negative |
| 11 | PULSE_OUT5_P | Digital | Latching yakabuda 6 yakanaka |
| 12 | PULSE_OUT5_N | Digital | Latching yakabuda 6 negative |
| 13 | PULSE_OUT6_P | Digital | Latching yakabuda 7 yakanaka |
| 14 | PULSE_OUT6_N | Digital | Latching yakabuda 7 negative |
| 15 | PULSE_OUT7_P | Digital | Latching yakabuda 8 yakanaka |
| 16 | PULSE_OUT7_N | Digital | Latching yakabuda 8 negative |
| 17,18 | GND | Simba | Ground |
J10 Latching Command (+/- VBAT)
| Pin | Function | Type | Tsanangudzo |
| 1 | STOBE8_P | Digital | Latching command 1 positive |
| 2 | STOBE8_N | Digital | Latching command 1 negative |
| 3 | STOBE9_P | Digital | Latching command 2 positive |
| 4 | STOBE9_N | Digital | Latching command 2 negative |
| 5 | STOBE10_P | Digital | Latching command 3 positive |
| 6 | STOBE10_N | Digital | Latching command 3 negative |
| 7 | STOBE11_P | Digital | Latching command 4 positive |
| 8 | STOBE11_N | Digital | Latching command 4 negative |
| 9 | STOBE12_N | Digital | Latching command 5 positive |
| 10 | STOBE12_P | Digital | Latching command 5 negative |
| 11 | STOBE13_P | Digital | Latching command 6 positive |
| 12 | STOBE13_N | Digital | Latching command 6 negative |
| 13 | STOBE14_P | Digital | Latching command 7 positive |
| 14 | STOBE14_N | Digital | Latching command 7 negative |
| 15 | STOBE15_P | Digital | Latching command 8 positive |
| 16 | STOBE15_N | Digital | Latching command 8 negative |
| Pin | Function | Type | Tsanangudzo |
| 17 | GATED_VBAT_PULSE | Simba | Gated Positive terminal yebhatiri |
| 18 | GND | Simba | Ground |
J11 Relay (+/- VBAT)
| Pin | Function | Type | Tsanangudzo |
| 1 | SOLAR+ | Simba | Solar Panel Positive Terminal |
| 2 | NC | NC | Zvisina kushandiswa |
| 3 | GND | Simba | Ground |
| 4 | RELAY1_P | Switch | Relay 1 yakanaka |
| 5 | NC | NC | Zvisina kushandiswa |
| 6 | RELAY1_N | Switch | Relay 1 negative |
| 7 | NC | NC | Zvisina kushandiswa |
| 8 | RELAY2_P | Switch | Relay 2 yakanaka |
| 9 | NC | NC | Zvisina kushandiswa |
| 10 | RELAY2_N | Switch | Relay 2 negative |
| 11 | 10kGND | Simba | Ground kuburikidza ne10k resistor |
| 12 | RELAY3_P | Switch | Relay 3 yakanaka |
| 13 | NTC | Analogi | Negative tembiricha coeffcient (NTC) thermoresistor |
| 14 | RELAY3_N | Switch | Relay 3 negative |
| 15 | GND | Simba | Ground |
| 16 | RELAY4_P | Switch | Relay 4 yakanaka |
| 17 | BATTERY+ | Simba | Battery Positive Terminal |
| 18 | RELAY4_N | Switch | Relay 4 negative |
Mechanical Information
Board Outline
Mounting Holes
Connector Positions
Certifications
Isu tinozivisa pasi pebasa redu chete kuti zvigadzirwa zviri pamusoro zviri kuenderana nezvinodiwa zvakakosha zvezvinotevera EU Directives uye saka tinokodzera kufamba mahara mukati memisika inosanganisira European Union (EU) neEuropean Economic Area (EEA).
Chiziviso cheKuenderana kuEU RoHS & REACH 211 01/19/2021
Mabhodhi eArduino ari kutevedzera RoHS 2 Direction 2011/65/EU yeParamende yeEuropean uye RoHS 3 Directive 2015/863/EU yeKanzuru ye4 Chikumi 2015 pamusoro pekurambidzwa kwekushandiswa kwezvimwe zvinhu zvine njodzi mumagetsi nemagetsi zvishandiso.
| Substance | Maximum Limit (ppm) |
| Tungamira (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Exemptions : Hapana kuregererwa kunodiwa.
Arduino Boards inoenderana zvizere nezvinodiwa zvinoenderana neEuropean Union Regulation (EC) 1907 / 2006 maererano neKunyoreswa, Kuongorora, Mvumo uye Kudzora Kemikari (REACH). Isu tinozivisa hapana yeSVHCs (https://echa.europa.eu/web/muenzi/mumiriri-rondedzero-tafura), Rondedzero yeVamiriri Yezvinhu Zvekunetsekana Kwakanyanya kwemvumo yakaburitswa neECHA, iripo mune zvese zvigadzirwa (uye zvakare pasuru) muhuwandu hunosvika mukusungwa kwakaenzana kana kupfuura 0.1%. Seruzivo rwedu, tinozivisawo kuti zvigadzirwa zvedu hazvina chero zvinhu zvakanyorwa pa "Authorization Rondedzero" (Annex XIV yeREACH mitemo) uye Substances of Very High Concern (SVHC) mune chero mari dzakakosha sezvakatsanangurwa. neAnnex XVII yeCandidate list yakabudiswa neECHA (European Chemical Agency) 1907 /2006/EC.
Conflict Minerals Declaration
Semutengesi wepasi rose wezvigadzirwa zvemagetsi nemagetsi, Arduino inoziva zvisungo zvedu maererano nemitemo nemirau ine chekuita neConflict Minerals, kunyanya iyo Dodd-Frank Wall Street Reform uye Consumer Protection Act, Chikamu 1502. Arduino haibvisi kana kugadzirisa kunetsana zvicherwa zvakaita seTin, Tantalum, Tungsten, kana Goridhe. Kunetsana zvicherwa zviri muzvigadzirwa zvedu muchimiro che solder, kana sechikamu musimbi alloys. Sechikamu chehungwaru hwedu hwakakodzera Arduino yabata vatengesi vechikamu mukati meketani yedu yekugovera kuti vaone kuenderera mberi kwavo kutevedzera mirairo. Zvichienderana neruzivo rwakagamuchirwa kusvika pari zvino tinozivisa kuti zvigadzirwa zvedu zvine Conflict Minerals inotorwa kubva kunzvimbo dzisina mhirizhonga.
FCC Kuchenjerera
Chero Shanduko kana gadziridzo dzisina kutenderwa nebato rine chekuita nekutevedzwa dzinogona kukanganisa mushandisi simba rekushandisa mudziyo.
Ichi chishandiso chinoenderana nechikamu 15 cheFCC Mitemo. Kushanda kunoenderana nemamiriro maviri anotevera:
- Ichi chishandiso chinogona kusakonzera kukanganisa kunokuvadza
- mudziyo uyu unofanira kugamuchira chero kukanganisa kugamuchirwa, kusanganisira kukanganisa kunogona kukonzera kushanda kwausingadi.
FCC RF Radiation Exposure Statement:
- Iyi Transmitter haifanirwe kunge iri-inowanikwa kana kushanda pamwe chete nechero imwe antenna kana transmitter.
- Ichi chishandiso chinoenderana neRF radiation exposure miganho yakatemerwa nharaunda isingadzoreki.
- Mudziyo uyu unofanirwa kuisirwa uye kushanda nehudiki hunhambwe 20cm pakati pe radiator & nemuviri wako.
Chirungu: Manyoro emushandisi ezvishandiso zveredhiyo zvisingabhadharwe achange aine chiziviso chinotevera kana chakafanana munzvimbo inoonekera mubhuku remushandisi kana neimwe nzira pamudziyo kana zvese zviri zviviri. Mudziyo uyu unoenderana neIndustry Canada rezinesi-isina RSS mwero(s). Kushanda kunoenderana nemamiriro maviri anotevera:
- mudziyo uyu unogona kusakonzera kukanganisa
- mudziyo uyu unofanira kugamuchira chero kukanganisa, kusanganisira kukanganisa kunogona kukonzera kushanda kusingadiwi kwemudziyo.
IC SAR Yambiro
Chirungu Midziyo iyi inofanirwa kuiswa uye kushandiswa nedikidiki chinhambwe 20 cm pakati pe radiator nemuviri wako.
Zvakakosha: Tembiricha yekushandisa yeEUT haigone kudarika 85 ℃ uye haifanirwe kunge yakaderera pane -40 ℃.
| Frequency mabhandi | Maximum inobuda simba (ERP) |
| 2402-2480Mhz | 3.35 dBm |
Apa, Arduino Srl inozivisa kuti chigadzirwa ichi chiri kuenderana nezvinodiwa zvakakosha uye zvimwe zvinoenderana neDirective 201453/EU. Ichi chigadzirwa chinotenderwa kushandiswa munyika dzese dziri nhengo dzeEU.
Ruzivo rwekambani
| Zita rekambani | Arduino Srl |
| Kero yekambani | Via Andrea Appiani 25, 20900 Monza, Italy |
Reference Documentation
| Ref | Link |
| Arduino® IDE (Desktop) | https://www.arduino.cc/en/Main/Software |
| Arduino® IDE (Cloud) | https://create.arduino.cc/editor |
| Arduino® Cloud IDE Kutanga | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with- arduino-web-editor-4b3e4a |
| Arduino® Pro Website | https://www.arduino.cc/pro |
| Project Hub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Raibhurari Reference | https://github.com/bcmi- labs/Arduino_EdgeControl/tree/4dad0d95e93327841046c1ef80bd8b882614eac8 |
| Online Store | https://store.arduino.cc/ |
Shandura log
| Date | Kudzokorora | Kuchinja |
| 21/02/2020 | 1 | Kutanga Kusunungurwa |
| 04/05/2021 | 2 | Dhizaini / chimiro chekuvandudza |
| 30/12/2021 | 3 | Mashoko anovandudzwa |
Zvinyorwa / Zvishandiso
 |
ARDUINO AKX00034 Edge Control [pdf] Bhuku reMuridzi AKX00034, 2AN9S-AKX00034, 2AN9SAKX00034, AKX00034 Edge Control, Edge Control |
