SMC EXW1-A1 Wireless Adaptor
Introduction
EXW1-A1 is a wireless adaptor which is equipped with 2.4GHz wireless communication capability. And this product has the RS485 interface for connection with SMC wireless Base/Remote units to communicate the input/output, diagnostic and other data. The frequency hopping period and the data rate can be selected between 2ms(1000kbps) / 5ms(250kbps). Moreover, the frequency channel numbers can be selected from 15 to 79.
Lineup EXW1-A1
Product number | Hardware version | Wireless software version | Control software version |
EXW1-A11N | Ver.1.0.0 | Ver.1.0.0 | Ver.1.0.0 |
EXW1-A12N | Ver.1.0.0 | Ver.1.0.0 | Ver.2.0.0 |
EXW1-A13N | Ver.1.0.0 | Ver.1.0.0 | Ver.3.0.0 |
EXW1-A11N-X1 | Ver.1.0.0 | Ver.1.0.0 | Ver.4.0.0 |
External appearance
Connections with Base/Remote units
The wireless adaptor is connected to Base and Remote units via a cable.
Connector pin assignment
Wireless Specification
Model | EXW1-A1 |
Product number | EXW1-A1*N |
Frequency range | 2.4GHz (2403MHz ~
2481MHz) |
Frequency Channel | 79ch~15ch
(ch separation min.1MHz) |
Protocol | SMC original protocol |
Encryption | SMC original encryption |
Radio wave type | FHSS |
Output level | 20dBm eirp |
CCA | Adaptive |
Modulation | GFSK |
Data Rate | 1000kbps / 250 kbps |
Deviation | 250kHz(1000kbps)
/ 62.5kHz(250kbps) |
Frequency hopping period | 2ms(1000kbps) /
5ms(250kbps) |
Antenna | Sleeve antenna (4.37dBi) |
Product specification
Model | EXW1-A1 |
Product number | EXW1-A1*N |
Wired interface | RS485 |
Wired data rate | Max. 2Mbps |
Cable | Max. 2.95m |
Communication distance | 100m |
Ambient operating temperature | -10 to +50oC |
Ambient storage temperature | -20 to +60oC |
Ambient humidity | 35 to 85% RH (no condensation) |
Power supply voltage | 12~24 VDC ±10% |
Current consumption | 50m A |
Documents / Resources
![]() |
SMC EXW1-A1 Wireless Adaptor [pdf] User Manual SMC-WEX08, SMCWEX08, 2AJE7SMC-WEX08, 2AJE7SMCWEX08, SMC-WEX08 Wireless Adaptor, EXW1-A1, Wireless Adaptor, EXW1-A1 Wireless Adaptor |