Quick start Guide – iOS

Setting up Smart Connect

Plug in Smart Connect easy

Install the App

https://itunes.apple.com/us/app/fuhr-smartconnect/id900377387?l=de&ls=1&mt=8

Download and install the Smart Connect App

Onboarding

Start the onboarding of the Smart Connect app.
Change to Smartphone settings and connect to the Smart Connect WiFi.
Set Network connection to WiFi or LAN cable (see next page for details).

Create an Application

Create an application: Home
Done: Press a button to operate the application

Note your passwords here
Username:…………………………..
Administrator:……………………
Wi-Fi:…………………………………

Manual and further information on docs.smartwireless.de

Network configuration

Wi-Fi settings: Settings ► Network configuration
Activate Remote-Control: Settings ► Network configuration
Activate Push-Messages: go to User-Setting

Wi-Fi Integration mode (recommended)
Integration into existing Wi-Fi network, allows optional Internet access LED 2 shines green resp. orange

Access Point Mode: Direct connection to Smart Connect via Wi-Fi, LED 2 shines blue (factory default)

Smart Connect easy in your home

1. Motorized lock + radio receiver e.g. FUHR NBFP506R
2. Motorized garage door + radio receiver e.g. FUHR NZ80088

Make sure to have a high quality network connection to the Smart Connect

Documents / Resources

SmartWireless iOS SmartConnect easy [pdf] User Guide iOS SmartConnect easy, SmartConnect easy, easy

References

• User Manual