Installation Manual
SSD002
Rev.A

SSD002 Smart Sensor Devices

Sensor Part Nr: SSD002 Screw recommended type: 8.2×38 mm (PH2)

1. Install the Mounting Bracket on the wall.
2. Slice the Sensor into the Mounting Bracket on the wall.
3. Insert the power cord into the sensor.

Documents / Resources

Smart Sensor Devices SSD002 Smart Sensor Devices [pdf] Instruction Manual SSD002 Smart Sensor Devices, SSD002, Smart Sensor Devices, Sensor Devices, Devices

References

• User Manual