2786C Side Handle for Gimbals
“
Specifications
- Compatibility:
- DJI Ronin-S / Ronin-SC
- DJI RS 2 / RSC 2
- DJI RS 3 / RS 3 Pro / RS 3 Mini
- DJI RS 4 / RS 4 Pro / RS 4 Mini
- Zhiyun Crane 2S / Crane 2 / Crane V2 Series
- Moza Air 2 / Moza AirCross 2
- Any camera or handheld gimbal with 1/4-20 or 3/8-16 threaded
hole on the bottom
- Manufacturer Email: support@smallrig.com
- Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
- Add: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation
Park, No. 58, Ping’an Road, Dafu Community, Guanlan Street, Longhua
District, Shenzhen, Guangdong, China. - Consignor: Shenzhen LC Co., Ltd.
- Add: Room 201, Building 4, Gonglianfuji Innovation Park, No.
58, Ping’an Road, Dafu Community, Guanlan Street, Longhua District,
Shenzhen, Guangdong, China.
Product Usage Instructions
1. Installation
Attach the side handle to your gimbal or camera by aligning the
threaded hole on the handle with the corresponding hole on the
device’s bottom. Tighten securely to ensure stable
installation.
2. Configuration for Hand Preference
Adjust the side handle to be configured for either the right or
left hand based on your preference. This allows for easier control
during operation.
3. Attaching Accessories
Utilize the various threaded holes and mounts on the handle’s
top to attach accessories such as monitors, microphones, wireless
transmitters, and action cameras for enhanced functionality.
4. Foldable Design
After use, fold the handle for easy storage and transportation.
This feature ensures convenience when not in use.
FAQ
Q: Can this side handle be used with any gimbal?
A: The side handle is compatible with DJI, Zhiyun, Moza handheld
gimbals, and any camera or device with a 1/4-20 or 3/8-16 threaded
hole on the bottom.
Q: Is it possible to attach a monitor to the side handle?
A: Yes, the handle is equipped with various threaded holes and
mounts on top, including ARRI 3/8-16 holes and cold shoe mounts,
allowing you to attach accessories like monitors securely.
“`
Side Handle (for Gimbals)
Operating Instruction
SmallRig Side Handle for Gimbals 2786C is designed to reduce arm fatigue and provide accessory mounts when shooting with your gimbals. This ergonomically-designed handle enables you to hold your gimbals with two hands to reduce the weight stress on one hand. The foldable design makes the handle easy to store and carry. It is designed with an anti-twist plate on the side for stably attaching the stabilizer and camera in the front, rear, and left positions. It connects to the bottom of the gimbal via 1/4″-20 or 3/8″-16 screws, which can be mounted on the left or right side of the stabilizer. The cross arm of the handle is designed with two 1/4″-20 threaded holes for attaching the Mini V-Lock Assembly Kit MD2801B, the 1/4″-20 threaded holes, ARRI 3/8″ -16 threaded holes & cold shoe mounts, for attaching the Swivel and Tilt Adjustable Monitor Mount 2903B, Magic Arm with Dual Ball Heads (1/4″-20 Screws) 3873, microphone, wireless transmitter, etc. A flat-head screwdriver is stored at the bottom to secure the mounting screw.
Safety Guidelines
1. Environment Do not use the product underwater, in extreme temperatures (e.g., freezing or direct heat), corrosive environments, or excessive dust. Dry metal parts immediately after liquid contact to prevent corrosion. 2. Load Capacity Do not exceed the maximum weight capacity indicated on the product. Overloading risks structural failure, deformation, or accidental drops. 3. Cleaning & Maintenance Clean surfaces with a dry, soft cloth. Avoid chemicals like alcohol or solvents. Ensure dry and ventilated conditions for long-term storage. 4. Structural Integrity Do not modify the product (e.g., drilling, cutting)–this compromises structural integrity and increases drop risks. 5. Malfunctions Stop use immediately if you notice deformation, unusual noises, or loose components, and contact support.
In the Box
Handle
× 1
Product Details
Guarantee Card
× 1
Easy to Use
Foldable design for easy storage, compatible with DJI, Zhiyun, and Moza handheld gimbals, and other cameras or devices with 1/4″-20 or 3/8″-16 threaded hole on the bottom
Side anti-twist design for stable installation without deformation
The top of the handle is equipped with 1/4″-20 threaded holes, ARRI 3/8″ -16 threaded holes & cold shoe mounts, for attaching the monitor, microphone, wireless transmitter, and action cameras, etc.
Can be configured for the right or left hand, easier control than handheld mode;
Two 1/4″-20 threaded holes on the bottom for attaching the Mini V-Lock Assembly Kit MD2801B.
Specifications
Product Dimensions: 170.8 x 120.0 x 55.0mm Package Dimensions: 176.0 x 53.0 x 55.0mm Product Weight: 296.0 ± 5.0g Package Weight: 336.0 ± 5.0g Material(s): Aluminum Alloy, Stainless Steel, Brass, Silicone
Compatibility:
DJI Ronin-S / Ronin-SC DJI RS 2 / RSC 2 DJI RS 3 / RS 3 Pro / RS 3 Mini DJI RS 4 / RS 4 Pro DJI RS 4 Mini Zhiyun Crane 2S / Crane 2 / Crane V2 Series Moza Air 2 / Moza AirCross 2 Any camera or handheld gimbal with 1/4″-20 or 3/8″-16 threaded hole on the bottom.
Manufacturer Email: support@smallrig.com Manufacturer: Shenzhen Leqi Innovation Co., Ltd. Add: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping’an Road,
Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China. Consignor: Shenzhen LC Co., Ltd. Add: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping’an Road,
Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
FR
Papier 5
Documents / Resources
 |
SmallRig 2786C Side Handle for Gimbals [pdf] Instruction Manual 2786C, 2903B, 3873, 2786C Side Handle for Gimbals, 2786C, Side Handle for Gimbals, Handle for Gimbals, for Gimbals |