MICROCHIP 50003215A Faufautua Faufautua i le MPLAB X IDE Taiala mo Tagata

Taua:
O fa'amaumauga uma e o'o ina aso, ma e le'o fa'alavelave fo'i tusi ta'iala mo Atina'e. O a matou mea faigaluega ma fa'amaumauga o lo'o fa'asolosolo pea e fa'afetaui mana'oga o tagata fa'atau, o lea e ono ese ai nisi fa'amatalaga moni ma/po'o fa'amatalaga meafaigaluega mai i latou o lo'o i totonu o lenei pepa. Fa'amolemole tagai i la matou webnofoaga (www.microchip.com/) e maua ai le lomiga lata mai o le pepa PDF. O faʻamaumauga e faʻamaonia ma se numera DS o loʻo i le pito i lalo o itulau taʻitasi. O le DS format o le DS , o fea o se numera 8-numera ma o se mataitusi tetele.
Mo fa'amatalaga sili ona lata mai, saili fesoasoani mo lau meafaigaluega ile onlinedocs.microchip.com/.

Faufautua Faufautua

Fa'aaliga: O lo'o iai fo'i lenei mea i totonu o le “MPLAB X IDE User's Guide” (DS-50002027).
Faufautua tu'ufa'atasi e fa'aalia se fa'atusatusaga fa'akalafi o seti, fa'atasi ai ma le fa'aeteete o lo'o avanoa mo fa'atonuga fa'aopoopo.
fa'aogaina le code project.
Ata 1-1. Faufautua Faufautua ExampleO lenei MPLAB X IDE plug-in e mafai ona aoga i:

Tuuina atu o faʻamatalaga e uiga i suʻesuʻega faʻapipiʻi avanoa mo ituaiga faʻapipiʻi taʻitasi (XC8, XC16, XC32).
Fa'aalia le advantago fa'ata'ita'iga ta'itasi e tu'uina atu mo se poloketi i se faiga fa'akalafi e faigofie ona faitau mo le polokalame ma le tele o fa'amaumauga.

Fa'asaoina fa'atonuga mana'omia.
Tuuina atu o feso'ota'iga i fa'auigaga fa'asilisili mo fa'atulagaga ta'itasi.

Lagolago Fa'atasi
Vaega fa'aopoopo lagolago:

MPLAB XC8 v2.30 ma mulimuli ane

MPLAB XC16 v1.26 ma mulimuli ane
MPLAB XC32 v3.01 ma mulimuli ane

Leai se laisene e mana'omia mo le fa'aoga. Ae ui i lea, o le numera o faʻataʻitaʻiga mo se tuʻufaʻatasiga saoloto o le a laʻititi nai lo le tuʻufaʻatasiga laiseneina.
MPLAB X IDE ma le Lagolago masini
O masini uma e lagolagoina i le MPLAB X IDE o le a lagolagoina i le Compiler Advisor. Fa'afou le Device Family Packs (DFPs) o le a fa'aopoopoina le lagolago i masini.
1.1 Fa'atino Iloiloga o Poloketi
Mo le faʻaaogaina o le Faufautua Faʻapipiʻi e faʻavasega lau poloketi mo tuʻufaʻatasiga eseese o faʻataʻitaʻiga, mulimuli i taualumaga i vaega nei.
1.1.1 Filifili Poloketi mo Iloiloga
I le MPLAB X IDE, tatala se poloketi ma i le faʻamalama o Poloketi pe kiliki i le igoa o le poloketi e faʻagaoioia pe kiliki saʻo i le igoa o le poloketi ma filifili "Set as Project Project."
Ole tulafono ole poloketi, faʻatulagaina, faʻapipiʻi ma masini o le a faʻaaogaina mo le auiliiliga. O lea ia mautinoa o loʻo lagolagoina le faʻapipiʻi ma le faʻapipiʻi masini e pei ona faʻamaonia i le 1. Faufautua Faufautua.
Fa'aaliga: O le a lapataia oe i le Compiler Advisor a'o le'i au'ili'ili pe afai e le sa'o le fa'apipi'i ma fa'aputuga masini.
1.1.2 Tatala Faufautua Compiler
Tatala le Compiler Advisor. Filifili Suʻesuʻega> Faufautua Faufautua a le o le kiliki saʻo i luga o le poloketi poʻo le faʻaaogaina o le lisi o Meafaigaluega. O faʻamatalaga e uiga i le poloketi filifilia o le a faʻapipiʻiina i le Compiler Advisor ma faʻaalia i le pito i luga o le faamalama (silasila i le ata i lalo). E le gata i lea, o loʻo i ai fesoʻotaʻiga e aʻoaʻo atili ai e uiga i le Faufautua Faufautua poʻo view Fesili e Fai soo.
Ata 1-2. Faufautua Faufautua ma Fa'amatalaga PoloketiFa'amaonia e sa'o le igoa o le poloketi, fa'atulagaina o galuega, filifili meafaigaluega ma masini mo le au'ili'iliga. Afai e leai sau fa'apipi'i lagolago po'o se fa'aputuga masini e filifilia mo lau poloketi, o le a fa'aalia se fa'amatalaga. Mo example, o se faʻamatalaga e uiga i faʻasalalauga faʻapipiʻi e le lagolagoina o le ai ai ni fesoʻotaʻiga e fesoasoani ia te oe (silasila i le ata i lalo):

Kiliki "faʻapipiʻi" e tatala ai le MPLAB XC C Compiler webitulau e mafai ona e sii maia pe fa'atau ai se fa'afouga fa'aputuga fa'aopoopo.

Kiliki le "Scan for Build Tools" e tatala ai le Meafaigaluega> Filifiliga> Faʻapipiʻi> Fausia Meafaigaluega faʻailoga e mafai ai ona e suʻeina lau masini mo faʻasologa o loʻo iai.
Kiliki le "sui" e tatala ai meatotino o le poloketi mo le filifilia o faʻamaumauga tuʻufaʻatasia.

O le taimi lava e maeʻa ai soʻo se faʻafouga manaʻomia, o le a iloa e le Faufautua Faufautua le suiga ma talosaga e te kiliki Reload. O le kilikiina o lenei ki o le a faʻafouina ai faʻamatalaga o le poloketi.
Ata 1-3. Fa'amatalaga ile Unsupported Compiler VersionAfai e te faia isi suiga i le poloketi, e pei o le suia o le faʻatulagaga, e te manaʻomia foʻi le Toe Laʻuina.
1.1.3 Iloilo le Poloketi
O le taimi lava e maeʻa ai soʻo se suiga o galuega faatino ma utaina i totonu o le Compiler Advisor, kiliki le Iloiloga. O le Faufautua Faufautua o le a fausia le faʻailoga o le poloketi i le tele o taimi e faʻaaoga ai seti eseese o faʻataʻitaʻiga.
Fa'aaliga: Fa'alagolago ile tele ole numera, atonu e umi se taimi.
A mae'a le su'esu'ega, o le a fa'aalia se kalafi e fa'aalia ai le polokalame ma fa'amaumauga o fa'amaumauga o lo'o fa'aogaina mo fa'atonuga ta'itasi (silasila i fa'atusa i lalo). Mo se tu'ufa'atasiga i le Free mode, o le koluma mulimuli o le a fa'aalia ai se fa'atusatusaga fa'atasi a le PRO. Ina ia faʻatau se laisene PRO, kiliki le "Buy License" soʻotaga e alu i le MPLAB XC Compiler webitulau e filifili ai le ituaiga PRO laisene e faʻatau.
O fa'amatalaga au'ili'ili o lo'o fa'asaoina i totonu o le faila o le poloketi.
Mo fa'amatalaga i luga o le siata, tagai i le 1.2 Malamalama i I'uga o Iloiloga i le Siata.
Ata 1-4. Laisene Free ExampleAta 1-5. PRO Laisene Example1.2 Malamalama I'uga Iloiloga ile Siata
O le siata na faia ina ua mae'a su'esu'ega o lo'o i ai le tele o vaega o lo'o fa'amatalaina i vaega nei. Fa'aoga nei vaega e iloa ai pe sa'o se isi fa'atulagaga mo lau talosaga.

1.2.1 Su'e Fausia Fa'aletonu

1.2.2 View Fa'atonuga Fa'atonu
1.2.3 View Fa'amatalaga Fa'atonu

1.2.4 Fa'aoga Fa'agaoioiga Fa'asinomaga Menu
1.2.5 View Fuafuaga Muamua

1.2.6 Faasaoina Faiga i le Poloketi

Ata 1-6. Fa'amatalaga Fa'amatalaga Siata1.2.1 Su'e Fausia Fa'aletonu
Pe a le manuia se faufale ona o nisi filifiliga sili ona lelei, e mafai ona e kiliki i le Fausia le Fai e alu i le mea o loʻo i ai le mea sese i le faamalama o le Output.
Ata 1-7. Fausia le So'oga Fa'aletonu1.2.2 View Fa'atonuga Fa'atonu
Kiliki le so'oga o se fa'ata'ita'iga (fa'ata'ita'iga, -Os) fa'aoga i se fa'atulagaga e maua atili ai fa'amatalaga. O le feso'ota'iga o le a ave oe i se fa'amatalaga o le fa'asilisiliina i totonu o le tu'ufa'atasiga fa'amaumauga i luga ole laiga.
Ata 1-8. Kiliki e Va'ai Fa'amatalaga Fa'alelei1.2.3 View Fa'amatalaga Fa'atonu
Ia vaai i le pasenetage ma bytes o le polokalame ma le manatuaga o faʻamaumauga o loʻo faʻaaogaina mo faʻatulagaga faufale taʻitasi, faʻapipiʻi i luga se paʻu manatua polokalame mo MCUs (silasila i le ata) ma se mea e manatua ai faʻamaumauga mo MPU.
Ata 1-9. MCU Mouseover mo Tooltip1.2.4 Fa'aoga Fa'agaoioiga Fa'asinomaga Menu
Kiliki taumatau i luga o le siata e oso i luga le lisi autu ma mea o loʻo lisiina i le laulau i lalo.
Laulau 1-1. Su'esu'ega Tu'ufa'atasi Ituaiga Menu

Menu Mea	Fa'amatalaga
Meatotino	Tatala le talanoaga o Meatotino Siata. Fa'aopoopo se ulutala, fa'atulaga le fa'afanua po'o le filifili isi ata tusi.
Kopi	Kopi se ata o le siata i le laupapa kilipa. Atonu e te mana'omia le suia o Meatotino.
Save As	Faasaoina le siata o se ata. Atonu e te mana'omia le suia o Meatotino.
Lolomi	Lolomi se ata o le siata. Atonu e te mana'omia le suia o Meatotino.
Fa'aauau	Fa'alia i luga pe fa'asolo i luga o togi siata ua filifilia.
Avanoa Faʻatasi	Otometi ona fetuutuunai le tele o to'i filifilia mo fa'amaumauga i le siata.

1.2.5 View Fuafuaga Muamua
I view le faʻatulagaina o le poloketi muamua na faʻaaogaina, kiliki i luga o le "Properties" e tatala ai le faamalama Project Properties.1.2.6 Faasaoina Faiga i le Poloketi
Kiliki i luga o le "Save Config" so'oga i lalo o se fa'atulagaga (eg, Config E) e te mana'o e fa'aopoopo i lau galuega. O le a tatalaina ai le Save Configuration to Project dialog (silasila i le ata i lalo). Afai e te manaʻo e avea lenei mea ma faʻatonuga malosi i le poloketi, siaki le pusa siaki. Ona kiliki lea OK.
Ata 1-10. Faasaoina le Fa'atonuga ile PoloketiIna ia tatala le Poloketi Meatotonu e vaʻai i le faʻaopoopoina o faʻatulagaga, kiliki le soʻotaga i le faʻamalama o le Output.
Ata 1-11. Tatala Meatotino Poloketi mai Fa'amalama Fa'atinoUa fa'aopoopo nei le fa'atulagaga i le poloketi. Afai na fa'agaoioia le fa'atulagaga, o le a fa'aalia fo'i i le lisi fa'ato'alalo o meafaigaluega.
Ata 1-12. Fa'atonu Fa'asaoina ile PoloketiFa'aaliga: Talu ai ona ua faʻaopoopoina le faʻatulagaga i le poloketi, o le a matauina e le Faufautua Faufautua se suiga i meatotino o le poloketi ma suia le Analyse to Reload.
1.3 Malamalama MPU Siata
O le fa'agasologa o le fa'atinoina o su'esu'ega o poloketi ma foliga o le siata au'ili'ili e maua mai e tutusa ma ia
taʻua muamua mo masini MCU. Eseesega mo MPU siata o:

O masini MPU o le a na'o le fa'aalia o fa'amatalaga e fai ma fa'amaumauga ona o se polokalame tu'ufa'atasia/fa'amaumauga tu'ufa'atasiga fa'amaumauga file.

E mafai ona iloa fa'amatalaga mo fa'atulagaga ta'itasi e ala i le fa'aoso i luga o se mea e manatua ai fa'amaumauga.

Ata 1-13. MPU Siata mai Iloiloga1.4 Iloilo le Isi Poloketi
Afai e te filifili e iloilo se isi galuega faatino, filifili lena galuega faatino e ala i le faagaioia po o le autu (tagai 1.1.1 Select Project for Analysis). Ona toe tatala lea o le Compiler Advisor (tagai 1.1.2 Open Compiler Advisor). O le a fesili se talanoaga pe e te mana'o e sui mai le poloketi o lo'o iai i le poloketi fou (silasila i le ata i lalo). Afai e te filifilia Ioe, ona faʻafouina lea o le faʻamalama Faufautua Faufautua ma faʻamatalaga o galuega filifilia.

Le Microchip Webnofoaga

Microchip e maua le lagolago i luga ole laiga e ala i la matou webnofoaga i www.microchip.com/. Lenei web'upega tafa'ilagi e fa'aoga e fai ai files ma fa'amatalaga faigofie ona maua e tagata fa'atau. O nisi o mea e maua e aofia ai:

Lagolago oloa - Pepa faʻamatalaga ma mea sese, faʻamatalaga talosaga ma samppolokalame, punaoa mamanu, ta'iala a le tagata fa'aoga ma pepa lagolago mo meafaigaluega, fa'asalalauga fou fa'akomepiuta ma polokalama fa'amaumauga

Lagolago Faʻatekinisi Lautele - Fesili e masani ona fesiligia (FAQs), talosaga lagolago faʻapitoa, faʻasalalauga i luga ole laiga, Microchip design partner programme list
Pisinisi o Microchip - Faʻatau oloa ma taʻiala faʻatonu, faʻasalalauga lata mai a Microchip, lisi o semina ma mea na tutupu, lisi o ofisa faʻatau Microchip, tufatufaina ma sui fale gaosimea

Au'aunaga Fa'asilasilaga Suiga o Mea

O le auaunaga fa'asilasilaga suiga o oloa a Microchip e fesoasoani e fa'amautu ai tagata fa'atau i oloa Microchip. O le a maua e le au fai saofaga le faʻamatalaga imeli i soʻo se taimi e iai suiga, faʻafouga, toe teuteuga poʻo mea sese e fesoʻotaʻi ma se aiga o oloa faʻapitoa poʻo meafaigaluega atinaʻe e fiafia i ai.
Ina ia lesitala, alu i www.microchip.com/pcn ma mulimuli i faatonuga o le resitalaina.

Lagolago Tagata Fa'atau

O tagata fa'aoga o oloa Microchip e mafai ona maua fesoasoani e ala i le tele o auala:

Fa'asoa po'o le Sui
Ofisa Fa'atauga Fa'alotoifale
Embedded Solutions Engineer (ESE)
Lagolago Fa'atekinisi

E tatau i tagata fa'atau ona fa'afeso'ota'i le latou tufatufaina, sui po'o le ESE mo le lagolago. O loʻo avanoa foʻi ofisa faʻatau i le lotoifale e fesoasoani i tagata faʻatau. O lo'o iai se lisi o ofisa fa'atau ma nofoaga i totonu o lenei pepa.
E maua le lagolago fa'apitoa e ala ile webnofoaga i: www.microchip.com/support

Faiga Fa'asinomaga Oloa

Ina ia oka pe maua mai faʻamatalaga, faʻataʻitaʻiga, i luga o tau poʻo le tuʻuina atu, faʻafesoʻotaʻi le falegaosimea poʻo le ofisa faʻatau lisi.

Meafaigaluega:	PIC16F18313, PIC16LF18313, PIC16F18323, PIC16LF18323
Filifiliga Tape ma Reel:	avanoa	= afifiina tulaga masani (faagaau po'o fata)
Filifiliga Tape ma Reel:	T	= Tape ma Reel(1)
Va'aiga vevela:	I	= -40°C i le +85°C (Alamanuia)
Va'aiga vevela:	E	= -40°C i le +125°C (Faalautele)
Paket:(2)	JQ	= UQFN
	P	= PDIP
	ST	= TSSOP
	SL	= SOIC-14
	SN	= SOIC-8
	RF	= UDFN
Mamanu:	QTP, SQTP, Laiti po'o Manaoga Fa'apitoa (fa'asao i se isi itu)

Examples:

PIC16LF18313- I/P Alamanuia vevela, afifi PDIP
PIC16F18313- E/SS Fa'ateleina le vevela, pusa SSOP

Fa'amatalaga:

Tape ma Reel fa'ailoa mai na'o le fa'amatalaga numera o vaega. O lenei faʻamatalaga e faʻaaogaina mo le faʻatonuina o faʻamoemoega ma e le lolomiina i luga o le pusa masini. Siaki lau Microchip Sales Office mo le avanoa o afifi i le Tape ma Reel filifiliga.
E mafai ona maua ni fa'ailoga fa'apipi'i laiti. Faamolemole siaki www.microchip.com/packaging mo la'ititi mea e maua ai afifi, pe fa'afeso'ota'i lou Ofisa Fa'atauga.

Fa'ailoga Puipuiga o Fa'ailoga Fa'atonu a Microchip

Manatua faʻamatalaga o loʻo i lalo o le faʻaogaina o le puipuiga o tulafono i luga o oloa Microchip:

O oloa Microchip e fetaui ma faʻamatalaga o loʻo i totonu o la latou Pepa Faʻamatalaga Microchip.
E talitonu Microchip o lona aiga o oloa e saogalemu pe a faʻaaogaina i le auala faʻamoemoeina, i totonu o faʻamatalaga faʻaogaina, ma i lalo o tulaga masani.

Microchip fa'atauaina ma puipuia fa'amalosi ana aia tatau tau meatotino. O taumafaiga e soli le tulafono o le puipuiga o le oloa Microchip e matua fa'asaina ma e ono solia ai le Digital Millennium Copyright Act.
E le mafai e le Microchip poʻo se isi mea gaosi semiconductor ona faʻamaonia le saogalemu o lana tulafono. O le puipuiga o tulafono laiti e le o lona uiga tatou te faʻamautinoa o le oloa e "le mafai ona motusia". O le puipuiga o tulafono laiti o lo'o fa'asolosolo pea. Microchip ua tuuto atu i le faʻaauauina pea o le faʻaleleia atili o uiga puipuia o tulafono a tatou oloa.

Faasilasilaga Faaletulafono

O lenei lomiga ma faʻamatalaga o loʻo i totonu e mafai ona faʻaaogaina naʻo oloa Microchip, e aofia ai le mamanu, suʻega, ma tuʻufaʻatasia oloa Microchip ma lau talosaga. O le fa'aogaina o nei fa'amatalaga i so'o se isi lava faiga e solia ai nei aiaiga. O fa'amatalaga e uiga i le fa'aogaina o masini e tu'uina atu mo na'o lou fa'amalieina ma e ono suia i fa'afouga. O lau matafaioi le faʻamautinoa o lau talosaga e fetaui ma au faʻamatalaga. Fa'afeso'ota'i lou ofisa fa'atau Microchip fa'apitonu'u mo se lagolago fa'aopoopo pe, maua se lagolago fa'aopoopo ile www.microchip.com/en-us/support/design-help/client-support-services.
O LENEI FAʻAMATALAGA E TUUINA E MICROCHIP "AS IS". E LEAI FAIA e le MICROCHIP ni sui po'o se fa'amaoniga o so'o se ituaiga pe fa'aalia pe fa'aali, tusia pe tugutu, tulāfono po'o se isi mea, e feso'ota'i ma fa'amatalaga e aofia ai ae le tapula'a i so'o se fa'amaoniaga fa'amaonia, fa'amaonia, ma le fa'amaoniaina. FAAMOEMOEGA, POO WARRANTY E FAI I ONA TULAGA, TULAGA, POO LE FAIGALUEGA.
E LEAI SE MEA E TATAU AI MICROCHIP MO SO'O SE FA'AMATALAGA, FA'AMATALAGA, FA'ASA'OGA, FA'AMATALAGA, PO'O LE FA'A'ALI'AGA MA'U'U, FA'AFIA, TAU, PO'O LE TU'U'UINA O SO'O SE I'UGA SO'O SE FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA, PE'O LE MEA NA FA'AUPUNA'I, E tusa lava pe fa'aletonu. FA'ATONU POO LE FA'AFIA E FA'AVAEINA. I LE AGATOGA FA'AALIGA E LE TULAFONO, O LE UMA AOFA'IGA A MICROCHIP I TOTOGI UMA I SO'O SE AUALA E FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA E LE'A LOLOA I LE TOTOGI O TOTOGI, AFAI E IAI, NA E TOTOGI SA'O I LE MICROCHIP MO LE FA'AMATALAGA.
O le fa'aogaina o masini Microchip i le tausiga o le ola ma/po'o le saogalemu o lo'o i le tulaga lamatia o le tagata fa'atau, ma e malie le tagata fa'atau e puipuia, fa'aleaga ma taofia Microchip le afaina mai so'o se mea leaga, tagi, suti, po'o tupe alu e mafua mai i lea fa'aoga. E leai ni laisene e tu'uina atu, fa'aalia po'o se isi mea, i lalo o so'o se Microchip aia tatau tau le atamai se'i vagana ua ta'ua.

Fa'ailoga Fa'ailoga

Le igoa Microchip ma le logo, le logo Microchip, Adaptec, Soʻo se Fua, AVR, logo AVR, AVR Freaks, BesTime, Bit Cloud, Crypto Memory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD , maXStylus, maXTouch, MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpySTNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ma XMEGA o fa'ailoga fa'amaufa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, IntelliMOS, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, WinPath, ma ZL o faʻailoga resitalaina o Microchip Technology Incorporated i Amerika.
Taofi Fa'aigoa Fa'atasi, AKS, Analog-for-the-Digital Age, So'o se Capacitor, So'o se In, So'oOut, Suiga Fa'aopoopo, BlueSky, BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching , ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Parallel, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Faʻamaonia logo, MPLIB, MPLINK, MultiTRAK, NetDetach, NVM Express, NVMe, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE , Ripple Blocker, RTAX, RTG4, SAMICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Aofa'i Uma, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ma ZENA o fa'ailoga fa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
SQTP ose fa'ailoga tautua a Microchip Technology Incorporated i Amerika
O le logo Adaptec, Frequency on Demand, Silicon Storage Technology, Symmcom, ma Trusted Time o fa'ailoga fa'amaufa'ailoga a Microchip Technology Inc. i isi atunu'u.
GestIC ose fa'ailoga fa'amaufa'ailoga a Microchip Technology Germany II GmbH & Co. KG, ose lala o Microchip Technology Inc., i isi atunu'u.
O isi fa'ailoga tau fefa'ataua'iga uma o lo'o ta'ua ii o meatotino a latou kamupani.
© 2021, Microchip Technology Incorporated ma ona lala. Ua Taofia Aia Tatau Uma.
ISBN: 978-1-5224-9186-6
AMBA, Arm, Arm7, Arm7TDMI, Arm9, Arm11, Artisan, big.LITTLE, Cordio, CoreLink, CoreSight, Cortex, DesignStart, DynamIQ, Jazelle, Keil, Mali, Mbed, Mbed Enabled, NEON, POP, MoniView, SecurCore, Socrates, Thumb, TrustZone, ULINK, ULINK2, ULINK-ME, ULINK-PLUS, ULINKpro, µVision, Versatile o faʻailoga faʻailoga poʻo faʻailoga resitalaina a Arm Limited (poʻo ona lala) i le US ma/poʻo se isi mea.

Faiga Fa'atonuga

Mo faʻamatalaga e uiga i Microchip's Quality Management Systems, faʻamolemole asiasi www.microchip.com/quality.

Fa'atauga ma Au'aunaga i le Lalolagi Atoa

AMERIKA	ASIA/ PASIFIK	ASIA/ PASIFIK	Europa
Ofisa Autasi 2355 Sisifo Chandler Blvd. Chandler, AZ 85224-6199 Telefoni: 480-792-7200 Fax: 480-792-7277 Lagolago Fa'atekinisi: www.microchip.com/support Web tuatusi: www.microchip.com Atlanta Duluth, GA Telefoni: 678-957-9614 Fax: 678-957-1455 Austin, TX Telefoni: 512-257-3370 Boston Westborough, MA Telefoni: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Telefoni: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Telefoni: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Telefoni: 248-848-4000 Houston, TX Telefoni: 281-894-5983 Indianapolis Noblesville, IN Telefoni: 317-773-8323 Fax: 317-773-5453 Telefoni: 317-536-2380 Los Angeles Misiona Viejo, CA Telefoni: 949-462-9523 Fax: 949-462-9608 Telefoni: 951-273-7800 Raleigh, NC Telefoni: 919-844-7510 Niu Ioka, NY Telefoni: 631-435-6000 San Jose, CA Telefoni: 408-735-9110 Telefoni: 408-436-4270 Kanata - Toronto Telefoni: 905-695-1980 Fax: 905-695-2078	Ausetalia – Sini Telefoni: 61-2-9868-6733 Saina - Beijing Telefoni: 86-10-8569-7000 Saina – Chengdu Telefoni: 86-28-8665-5511 Saina – Chongqing Telefoni: 86-23-8980-9588 Saina – Dongguan Telefoni: 86-769-8702-9880 Saina – Guangzhou Telefoni: 86-20-8755-8029 Saina – Hangzhou Telefoni: 86-571-8792-8115 Saina - Hong Kong SAR Telefoni: 852-2943-5100 Saina – Nanjing Telefoni: 86-25-8473-2460 Saina – Qingdao Telefoni: 86-532-8502-7355 Saina – Shanghai Telefoni: 86-21-3326-8000 Saina – Shenyang Telefoni: 86-24-2334-2829 Saina – Shenzhen Telefoni: 86-755-8864-2200 Saina – Suzhou Telefoni: 86-186-6233-1526 Saina - Wuhan Telefoni: 86-27-5980-5300 Saina – Xian Telefoni: 86-29-8833-7252 Saina – Xiamen Telefoni: 86-592-2388138 Saina – Zhuhai Telefoni: 86-756-3210040	Initia – Bangalore Telefoni: 91-80-3090-4444 Initia – New Delhi Telefoni: 91-11-4160-8631 Initia - Pune Telefoni: 91-20-4121-0141 Iapani - Osaka Telefoni: 81-6-6152-7160 Iapani - Tokyo Telefoni: 81-3-6880-3770 Korea – Daegu Telefoni: 82-53-744-4301 Korea – Seoul Telefoni: 82-2-554-7200 Meleisia – Kuala Lumpur Telefoni: 60-3-7651-7906 Meleisia – Penang Telefoni: 60-4-227-8870 Filipaina – Manila Telefoni: 63-2-634-9065 Singapore Telefoni: 65-6334-8870 Taiuani – Hsin Chu Telefoni: 886-3-577-8366 Taiuani – Kaohsiung Telefoni: 886-7-213-7830 Taiuani – Taipei Telefoni: 886-2-2508-8600 Taialani – Bangkok Telefoni: 66-2-694-1351 Vietnam – Ho Chi Minh Telefoni: 84-28-5448-2100	Ausetalia – Uelese Telefoni: 43-7242-2244-39 Fax: 43-7242-2244-393 Tenimaka – Copenhagen Telefoni: 45-4485-5910 Fax: 45-4485-2829 Finelani – Espoo Telefoni: 358-9-4520-820 Farani – Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Siamani – Garching Telefoni: 49-8931-9700 Siamani – Haan Telefoni: 49-2129-3766400 Siamani – Heilbronn Telefoni: 49-7131-72400 Siamani – Karlsruhe Telefoni: 49-721-625370 Siamani – Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Siamani – Rosenheim Telefoni: 49-8031-354-560 Isaraelu – Ra’anana Telefoni: 972-9-744-7705 Italia – Milan Telefoni: 39-0331-742611 Fax: 39-0331-466781 Italia – Padova Telefoni: 39-049-7625286 Netherlands – Drunen Telefoni: 31-416-690399 Fax: 31-416-690340 Nouei – Trondheim Telefoni: 47-72884388 Polani – Warsaw Telefoni: 48-22-3325737 Romania – Bucharest Tel: 40-21-407-87-50 Sepania - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Suetena – Gothenberg Tel: 46-31-704-60-40 Suetena - Stockholm Telefoni: 46-8-5090-4654 Peretania - Wokingham Telefoni: 44-118-921-5800 Fax: 44-118-921-5820

Pepa / Punaoa

MICROCHIP 50003215A Faufautua Faufautua ile MPLAB X IDE [pdf] Taiala mo Tagata Fa'aoga
50003215A Faufautua Faufautua ile MPLAB X IDE, 50003215A, Faufautua Faufautua ile MPLAB X IDE, Faufautua ile MPLAB X IDE, MPLAB X IDE, X IDE

Fa'asinomaga

Tusi Taiala

Fa'asilasilaga i Tagata Fa'atau Meafaigaluega Atina'e