Mataupu lalafi
1 Lumens CamConnect Pro AI-Box1 CamConnect Processor
2 Fa'atonuga o le Fa'aaogaina o Mea
3 So'oga Fa'atonu
4 Fa'agaioiga Fa'aoga
5 Web Fa'afeso'ota'i
6 Feso'ota'i i polokalame fa'akoneseti vitiō
7 Fa'atonuga faaleotelefoni
8 Fa'afitauli
9 Fa'atonu Feau
10 Pepa / Punaoa
10.1 Fa'asinomaga
11 Fa'amatalaga Fa'atatau

Lumens-LOGO

Lumens CamConnect Pro AI-Box1 CamConnect Processor

Lumens-CamConnect-Pro-AI-Pusa1-CamConnect-Processor-AGAAGA-ATA

Fa'amatalaga o oloa

Fa'amatalaga:

  • Igoa Oloa: CamConnect AI-Pusa1
  • Feso'ota'iga: AI-Box1 IO Feso'ota'iga
  • Fegalegaleai: E galue i masini faaleotele leo lagolago o loo lisiina i Lumens webnofoaga
  • Feso'ota'iga: fa'aoga IP Address
  • Taulaga: E eseese e fa'atatau ile ituaiga masini faaleotele leo
  • Fa'aaliga: Su'e leo, fetu'una'iga tulaga fa'aoso leo, fa'atonuga o meapueata

Fa'atonuga o le Fa'aaogaina o Mea

Mataupu 1: So'oga Fa'atonu

So'oga Fa'atonu:
Mulimuli i faʻatonuga o loʻo tuʻuina atu e faʻavae ai le fesoʻotaʻiga mo le AI-Box1.

AI-Box1 IO Fa'aoga:
Va'ai ile tusi lesona mo fa'amatalaga ile AI-Box1 IO Interface mo le fa'atulagaina lelei ma le fa'atulagaina.

Mataupu 2: Fa'aoga Fesootaiga
Su'esu'e le fa'aoga fa'aoga e maua ai fa'atulagaga ma fa'atinoga o le CamConnect AI-Box1.

Mataupu 3: Web Fa'afeso'ota'i
Avanoa i le web fa'aoga e pei ona fa'amatalaina i le tusi lesona e fa'atautaia ai fa'aopoopo fa'aopoopo ma fa'atulagaga.

Mataupu 4: Feso'ota'i ile polokalame fa'akoneseti vitiō
Mulimuli i laasaga o loʻo faʻamatala atu i lenei mataupu e faʻafesoʻotaʻi ai le AI-Box1 i lau polokalama telefoni feaveaʻi.

Mataupu 5: Fa'atulagaina o masini faaleotele leo
Fetuuna'i tulaga faaleotele leo e aofia ai le tuatusi IP, uafu, siaki leo, tulaga faaosofia leo, ma le pulea mea pueata.

Mataupu 6: Fa'afitauli
Va'ai i le mataupu lenei mo ta'iala ile fo'ia o fa'afitauli masani e ono tula'i mai ile fa'aogaina o oloa.

Mataupu 7: Savali Faiga
Review fe'au faiga ma so'o se fa'amatalaga taua e feso'ota'i ma le CamConnect AI-Box1.

Fesili e Fai soo (FAQ):

  • Q: O fea e mafai ona ou maua ai le firmware fou ma avetaavale mo le CamConnect AI-Pusa1?
    A: E mafai ona e siiina mai le firmware fou ma avetaavale mai https://www.MyLumens.com/support
  • Q: E fa'afefea ona ou setiina le su'eina o leo ile AI-Box1?
    A: Ina ia faʻatulagaina le suʻesuʻeina o leo, faʻaaga le ata i totonu o faʻatulagaga ma fetuunai le maualuga o le faʻalogo leo e faʻatatau i mea e te manaʻo ai.

So'oga Fa'atonu

So'oga Fa'atonu

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (2)

AI-Box1 IO Fa'aoga 

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (3)

Fa'agaioiga Fa'aoga

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (4)

(A) Fa'atulagaina o Masini

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (5)
Leai Aitema Fa'amatalaga Galuega
1 Numera masini Filifili le numera mana'omia o microphones e fa'afeso'ota'i
2 Lisi masini Fa'aali masini faaleotele leo i fa'amau ta'itasi
 3  Meafaigaluega Filifili masini faaleotele leo
Manatua Fa'amolemole fa'aaoga se masini faaleotele leo lagolago (tagai Lumens webnofoaga)
4 IP masini Ulufale i le tuatusi IP o le masini faaleotele leo
 5       Taulaga Fa'aali atu le uafu o le masini faaleotele leo
  • Shure: 2202§ Shure: 2202
  • Sennheiser: 45
  • Sennheiser TCCM: 443
  • Nureva: 8931
  • Yamaha: 49280
  • Audio-Tekinolosi : 17300

Manatua Na'o Nureva e fa'atagaina PORT fa'apitoa
6 Feso'ota'i Fa'amalo/Ta'e le faiga fa'atulagaina
 7  Su'e leo A fa'agaoioi, o fa'ailo e maua e se masini faaleotele leo e fa'aoso ai tulaga fa'apolokalame o meapueata. Pe a seti seti meapueata, e taua le tapeina o lenei galuega.
   8   Tulaga Fa'aoso leo > dB Fa'aoso pe a sili atu le tau o le dB ua filifilia.
  • Sennheiser:-90~0 (fautua -55)
  • Nureva:0~120 (fautuaina 40+)
  • Audio-Technica:0~60 (fautuaina 30)
  • Yamaha:0~126 (fautuaina 80+ mo RM-CG / 70+ mo RM-W)
 9  Taimi e fa'aosoina le seti Fa'atonu Fa'atuai Talia leo A tupu se fa'aoso lona lua, o le a fa'atuai i le fa'aosoina o meapueata fa'ata'atitia e fa'atatau i le umi fa'atulagaina i sekone.
 10  Toe fo'i i le Taimi Fale Fa'afo'i le meapueata i lona tulaga fale Afai e leai se fa'alogo leo, o le a alu le meapueata i lona tulaga i le fale pe a uma le seti o sekone.
11 Toe fo'i ile Meapueata ile Fale Filifili se meapueata se tasi pe filifili uma meapueata e alu i le tulaga o le fale.
 12 Toe fo'i i le Tulaga Aiga  O le a toe fo'i le meapueata i so'o se tulaga o le Aiga po'o se tulaga fa'apitoa.
13 Talosaga Fa'amaonia suiga i tulaga.

(B) Pulea ma Tulaga Meapue

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (6)
Leai Aitema Fa'amatalaga Galuega
1 I'ugafono / FPS Resolution/FPS Settings (e tatau ona fetaui ma tulaga o mea pu'eata)
 2  Toe fa'afou / Fa'aopoopo Kiliki  Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (7) e su'e se mea pu'eata i luga ole feso'ota'iga po'o le fa'aulu ma le lima ile IP fa'amaonia, ma kiliki [Faaopoopo] e faaopoopo i ai
Manatua Faamolemole ia mautinoa o le meapueata ma AI-Box1 o loʻo i luga o le vaega fesoʻotaʻiga tutusa.
3 Igoa Meafaigaluega Fa'aali meapueata maua
4 Feso'ota'i Kiliki e fa'afeso'ota'i. O mea pu'eata feso'ota'i e fa'ailogaina i le lanumoana.
5 PTZ Pulea Kiliki ina ia mafai ai le pulea o le PTZ Fa'asino i 2.2.1 Pulea PTZ mo faʻamatalaga galuega
6 Aveese Aveese se meapueata mai le lisi.

PTZ Pulea

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (8)
Leai Aitema Fa'amatalaga Galuega
1 Preview faamalama Fa'aali atu le mea pu'eata
2 Fa'ata / Su'e Fa'ata pe liliu le ata
 3  Pan/Si'i/Faiga Fetuuna'i le tulaga Pan/Tilt o le meapueata Kiliki [Aiga] faamau e toe foi ai i le tulaga tutotonu o le meapueata
 4  Fa'atonu seti
  • Valaau Fa'atonu Tulaga: Kiliki muamua se numera ma le Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (9)
  • Tulaga Fa'ata'atia: Kiliki muamua se numera ona soso'o ai lea Faleoloa
5 AF/MF Su'e i le Auto/Manual meapueata taula'i
6 Sa'o Lens Sa'o i totonu/Ofo
7 Alu Alu ese mai le PTZ Control page

(D) Masini & Meapue Faafanua
A feso'ota'i le masini faaleotele leo, o le a alu le meapueata i se tulaga faatulagaina e fetaui ma le tulaga leo e iloa e le masini faaleotele leo.

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (10)
Leai Aitema Fa'amatalaga Galuega
1 Fa'afanua Qty Filifili le numera o nofoaga e fa'afanua. E oʻo atu i le 128 faʻasologa o loʻo lagolagoina.  Manatua Shure MXA310/ MXA910/ MXA920/ Audio-Technica leai se lagolago Manatua E le lagolagoina i Shure MXA310/ MXA910/ MXA920 ma Audio-Technica microphones.
2 Fa'ailoga O le moli lanu meamata e fa'aalia ai o lo'o iloa e le masini faaleotele leo se leo.
3 Array Nu. Azimuth Angle
  • Numera Numera: Fa'atatau i masini Shure / Audio-Technica
  •  Azimuth Angle: Faʻatatau i masini Sennheiser, Nureva, ma Yamaha. E mafai ona fetuutuunai lima
4 Meapueata Muamua Filifili se meapueata a le Peraimeri e mana'omia mai le lisi o le pa'u i lalo. Afai e le mafai ona feso'ota'i ma se meapueata na fa'asaoina muamua, Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (11)o le a fa'aalia.
5 Meapueata Lua Filifili le meapueata lona lua e mana'omia mai le lisi o mea'ai. A fa'aosoina se meapueata i se tulaga fa'amuamua, ae toe fa'atupuina se isi tulaga fa'amuamua mo le meapueata lava lea e tasi, o le meapueata lona lua o le mea pu'eata lona lua lea e muamua alu i ai nai lo le meapueata muamua.
Fa'aaliga: E na'o le avanoa lea e maua pe a fa'agaoioi le Seamless Switching. Afai e le mafai ona feso'ota'i ma se meapueata na fa'asaoina muamua, Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (11)  o le a fa'aalia.
6 Fa'atonu Nu. Filifili le tulaga faatulagaina mo le meapueata mai le lisi o le pa'ū
7 AI Seti Fa'aagaoi/Ta'e le Su'esu'ega AI Ø Su'esu'ega Fa'aauau ： O le a fa'aauau pea ona siaki e le meapueata le
tagata taitoatasi, tausia i latou i le tulaga tutotonu.
  •  Nofoaga Stagu: A fa'aoso le meapueata i se tulaga fa'atulaga, o le a fa'atotonu le tagata i luga o le lau mo le 5 sekone a'o le'i tu le su'ega.
8 Mic. No./Mic. Azimuth Angle Fa'aalia le tulaga fa'aoso/matamata fa'amatalaga o le meapueata.

(E) Fa'atonu Fa'atonu

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (12)
Leai Aitema Fa'amatalaga Galuega
1 Gagana Igilisi
2 Max Microphone Qty. Feso'ota'i e o'o atu i le 24 microphones.
  3   Soʻotaga Otometi Fa'atulaga mea e feso'ota'i-autometi pe a mae'a le eletise AI-Box1.
  • Mea Fa'alogo
  • Meapueata
  • Ata Vitio
     4      Profile Faatulagaina
  • Fa'asao/ uta: Fa'asao pe uta le pro mana'omiafile.
  • AutoSave Interval: Seti le taimi e teu ai taavale.
  • Taimi Faatalitali o le Amataina o le System: Seti le taimi faatalitali amata.

A mae'a ona ola AI-Box1, o le a otometi lava ona su'e masini faaleotele leo ma meapueata. Afai o masini e umi se taimi faʻapipiʻi, AI-Box1 atonu e le faʻafesoʻotaʻi lelei i masini. Ina ia puipuia lenei faʻafitauli, faʻamolemole fetuutuunai le taimi faʻatalitali e faʻatatau i le siʻosiʻomaga o loʻo iai nei ma le taimi faʻapipiʻi o masini faaleotele leo ma mea pueata.
5 Firmware Auto Check Otometi siaki mo fa'afouga firmware.
6 Toe setiina Toe setiina le CamConnect Pro AI-Box1.
7 Faasilasilaga sese Fa'aola/ta'u le fe'au sese ma fa'amatalaga.
8 Talosaga Fa'amaonia ma fa'aoga tulaga.
  9       Fesootaiga Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (13)Filifili le DHCP poʻo le Static. E mafai ona suia le tuatusi ile tulaga Static. Kiliki Apply e sefe.

(F) Fa'atonuga o Fa'atinoga Vitio

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (14)
Leai Aitema Fa'amatalaga Galuega
1 Vitio Faiga Galue Seti le Faiga Fa'atino ile UVC, HDMI po'o le UVC+HDMI
   2    Fuafuaga o Ata Vitio Fa'atulaga le fa'atulagaina o le ata vitio e tusa ai ma le fa'asinomaga ua tu'uina atu i le vaega 2.5.1 Fuafuaga Fa'atino Vitio
  • Koluse: 4-vaega lau
  • PBP: Ata i Ata mata
  • Fa'ato'aga: Fa'ato'aga lau mata

Filifili na'o Cross/PBP
 3  Suiga Su'ega Ua fa'atulaga le faiga mo le mata e tasi, ma o le suiga o meapueata e fa'aosoina e le fa'ailoga faaleotele leo.
  4    Tulaga Punavai Suia le tulaga faʻaalia o le mea pueata, filifili "[Custom]" ona kiliki lea i luga o le "[Edit]" e ulufale ai i le faʻataʻitaʻiga faiga.Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (15)

Fuafuaga o Ata Vitio 

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (16)

   fua Tu'u i luga Otioti
Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (17) Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (18)

(G)Amata le Ata Vitio
Kiliki e fa'aalia ata pu'eata e ala ile HDMI, UVC po'o le HDMI+UVC.

(H) Fa'aopoopoga 

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (19)

Leai
   1   Reference Audio(O le Lumens audio cable splitter e manaʻomia ina ia mafai ai lenei galuega.) Le fa'afitauli e fa'atatau
Ina ia mautinoa i le taimi o se fonotaga o le konafesi, o le leo mai le itu a le tagata faatau o le a le iloa e le pito i luga ole masini faaleotele leo mai lo tatou pito, lea e mafai ona faʻafuaseʻi ona faʻaosoina le mea pueata..
So'oga:
Fa'afeso'ota'i masini uma e fa'aaoga ai le uaea leo Lumens splitter.
  1. Faʻafesoʻotaʻi le tasi pito (faʻatasi ma mama e lua) i le komepiuta.
  2. Fa'afeso'ota'i le isi pito (ma mama e tolu) i le pu Fa'asao i luga o le Cam Connect Pro.
  3. O le pito ma se mama e tasi e tatau ona faʻafesoʻotaʻi i le failauga e puʻeina le leo.

 Fa'aoso leo(dB): Seti le faʻailoga faʻalogo leo (-100~0 dB) .O le masini faaleotele leo o le a naʻo le faʻaalia o le suʻesuʻeina pe a sili atu le leo i le tulaga faʻatulagaina.
Taimi (s) Su'esu'e: Seti le umi ole su'esu'ega (0~10 sekone)
Fa'amalo: Ki / Pepe
Talosaga: Kiliki e fa'aoga tulaga.
 2. Vitio Fa'asinomaga (O le Lumens BC200 Le fa'afitauli e fa'atatau
E ono fa'aoso le meapueata i so'o se leo, pe mafua mai i se tagata pe na'o se pisa fa'afuase'i. Faatasi ai ma le Lumens BC200 meapueata fesoasoani,
e mana'omia le meapueata ina ia mafai ai lenei galuega.) o le a le toe fa'aosoina e le leo na'o le faiga. O le a fa'aogaina fo'i le fa'ailoga mata ole AI e iloa ai tagata ile nofoaga. O le mea pu'eata o le a fa'ato'a fa'aoso pe a o'o mai se fa'alogo leo ma foliga o le tagata e mafai ona iloa. 

So'oga: E tatau ona fa'afeso'ota'i le mea pu'e pu'e pu'e pu'e pu'e pu'e pu'e pu'e pu'eata a Lumens BC200. O le BC200 ua fa'atulaga e fa'alauiloa ile Q1 2025. Mo se fa'amatalaga auiliili, fa'amolemole tagai ile BC200 fa'aoga tusi lesona i lena taimi. 

Meapueata Fesoasoani: Fa'amalo pe fa'amalo le meapueata BC200.
Su'esu'ega Sone Va'aiga: O lenei vaega e le aoga i le taimi nei ma e le mo le faʻaaogaina.
Talosaga: Kiliki e fa'aoga tulaga.

(I) Siaki Tiki
Fua le faitau mai le SD card e siaki pe o galue lelei. O fa'amaumauga faitau e mafai ona tu'uina atu i le aufaigaluega a le Lumens mo le toe su'esu'eina.

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (20)

(J) Fa'amatalaga 

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (21)
Fa'amatalaga Galuega

O lenei faʻamalama e faʻaalia ai faʻamatalaga faʻamatalaga o le polokalama ole AI-Box1. Kiliki i luga Siaki e fa'amaonia le lomiga fou ma fa'aaoga fa'afouga.
Mo fesoasoani fa'apitoa, fa'amolemole su'esu'e le QRcode i le itu taumatau.

Web Fa'afeso'ota'i

Fa'atonuga masini 

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (22)
Leai Aitema Fa'amatalaga Galuega
1  Laulelei Leo
  • Array Microphone Numera: Filifili le numera mana'omia o microphones e fa'afeso'ota'i
  • Meafaigaluega: Filifili se masini faaleotele leo
  • IP masini: Ulufale le tuatusi IP o le masini faaleotele leo
  • Fa'aali atu le uafu o le masini faaleotele leo
    • Shure: 2202
    • Sennheiser: 45
    • Sennheiser TCCM: 443
    • Nureva: 8931
    • Yamaha: 49280
    • Audio-Tekinolosi : 17300

Manatua Na'o Nureva e fa'atagaina PORT fa'apitoa

  • Feso'ota'i: Fa'aaga/Ta'e le so'oga faaleotele leo
  • Fa'atonuga Fa'atonuga

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (23)
  • La'asaga Fa'aoso leo > dB: Fa'aoso pe a sili atu le tau o le dB fa'apogai.
    • Sennheiser:-90~0 (fautua -55)
    • Nureva:0~120 (fautuaina 40+)
    • Audio-Technica:0~60 (fautuaina 30)
    • Yamaha:0~126 (fautuaina 80+ mo RM-CG / 70 up mo RM-W)
  • Taimi e fa'aoso ai Fa'atonu: Fa'atonu Fa'atuai Talia

A tupu se fa'aoso lona lua, o le a fa'atuai i le fa'aosoina o meapueata fa'ata'atia e fa'atatau i le umi fa'atulagaina i sekone.

  • Toe Fo'i i le Fale Taimi: Afai e leai se fa'alogo leo, o le a alu le meapueata i lona tulaga fale pe a uma le seti o sekone.
  • Toe Fo'i i le Fale Tulaga: E mafai ona e filifilia le tulaga o le Fale po'o le fa'ailogaina o se numera seti.
   2  Fa'afanua masini & meapueata
  • Si'i leo: A fa'aaga, e mafai e le masini faaleotele leo ona maua fa'ailoga, ma o le meapueata o le a fa'agaoioi i tulaga faatulagaina pe a fa'aoso. Pe a seti tulaga faatulagaina, tape lenei galuega.

Fua Fa'afanua: Filifili le numera o nofoaga e fa'afanua. E oʻo atu i le 128 faʻasologa o loʻo lagolagoina.
Manatua Shure MXA310/ MXA910/ MXA920/ Audio-Technica leai se lagolago
Manatua Le lagolagoina i Shure MXA310/ MXA910/ MXA920 ma Audio-Technica microphones.

  • Fa'ailoga: o se moli lanu meamata e fa'ailoa mai ai o lo'o iloa e le masini faaleotele leo se leo.
  • Array Nu. / Azimuth Angle:
    • Numera Numera: Fa'atatau i masini Shure/ Audio-Technica
    • Azimuth Angle: Faʻatatau i masini Sennheiser, Nureva, ma Yamaha. E mafai ona fetuutuuna'i le tulimanu
  • Meapue a le Peraimeri: Filifili se meapueata a le Peraimeri mai le lisi pa'u i lalo
  • Meapueata Lua: Filifili se meapueata Lua e mana'omia mai le lisi o le pa'u i lalo. A fa'aosoina se meapueata i se tulaga fa'amuamua, ae toe fa'atupuina se isi tulaga fa'amuamua mo le meapueata lava lea e tasi, o le meapueata lona lua o le mea pu'eata lona lua lea e muamua alu i ai nai lo le meapueata muamua.

Fa'aaliga: E na'o le avanoa lea e maua pe a fa'agaoioi le Seamless Switching

  • Numera muai: Filifili le tulaga faatulagaina mo le meapueata mai le lisi o le pa'u
  • AI Seti: Fa'aaga/Ta'e le su'ega AI
    • Nofoaga Stagu: A fa'aoso le meapueata e fa'asolo i se tulaga fa'atulaga, o le a fa'atotonu le tagata i luga o le lau mo le 5 sekone a'o le'i tu le su'ega.
    • Su'esu'ega Fa'aauau: O le mea pu'eata o le a fa'aauau pea ona siaki le tagata, fa'amautu i le tulaga tutotonu.

Meafaigaluega – Lisi meapueata

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (24)
Leai
      1        Lisi meapueata I'uga/FPS: E tatau ona fetaui ma fa'atonuga o iugafono a le meapueata
  • Toe faafou Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (25) : su'e mea pu'eata i lenei vaega feso'ota'iga.
  • Fa'aopoopo: Ta'i ma le lima le tuatusi IP, ona kiliki lea Faaopoopo

Manatua Fa'amolemole ia mautinoa o mea pu'eata ma AI-Box1 o lo'o i totonu o le vaega feso'otaiga tutusa.

  • Feso'ota'i / Mo'esea: Kiliki [Feso'ota'i] e mafai ai pe tape le feso'ota'iga ma le meapueata.
  • PTZ Pulea: Kiliki e maua ai le meapueata webitulau. Fa'amatalaga masani: admin/9999

Mo nisi fa'amatalaga, fa'amolemole tagai ile tusi lesona ole meapueata.

AI Faatonu 

 

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (26)
Leai Aitema Fa'amatalaga Galuega
 1.  Faiga o Talanoaga O loʻo avanoa faʻamaumauga na muai fuafuaina mo le filifilia, faʻatagaina tagata faʻatau e faʻaoga faʻataʻitaʻiga e aunoa ma le faʻavasegaina. (O le a maua nisi faʻataʻitaʻiga i le lumanaʻi)
2 Faiga Fa'ailoa Le avanoa mo le taimi nei.
3 Faiga o folau Le avanoa mo le taimi nei.
4 Fa'asinomaga Fausia ma fa'avasega atoatoa au lava tusitusiga fa'apitoa e 2.
5 Fa'atonu Fa'atonu mea o lo'o i totonu o le tusitusiga
6 Tamomoe / Taofi Amata pe taofi le faʻasologa o tusitusiga.
7 Fa'amaufa'ailoga Fa'aali le gaioiga o le ogalaau a le Fa'atonu AI.
Example o le fatuina o tusitusiga
Tusiga Tusi: Faiga o Talanoaga Example

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (27)

A.  Meapueata: Fa'atonu ni fa'atonuga mo mea pu'e feso'ota'i e fa'agaoioi i se tulaga fa'atulaga po'o le toe fo'i i lo latou tulaga.
B.  Microphone:

  1. numera fa'aoso: Seti le numera o fa'aoso (1~100) mana'omia e fa'agaoioi ai le meapueata.
  2. All Mic off Stream: Fa'amatala le gaioiga o le a faia e Cam Connect Pro pe a le toe maua e le masini faaleotele leo. Mo example, sui le vaaiga fa'atulagaina ata po'o le auina atu o poloaiga i mea pu'eata.

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (28)

(Tagaʻi i le example lalo)
C.  Fa'atonu:

  1. Ata Vitio: Cross / PBP
  2. Ata Vitio o le aofa'i o meapueata: 1×1 / 1×2 / 1×3 / 2×2
  3. Punavai vitio i tulaga patino
D. Pulea
  1. Tusi amata:
    • O lenei poloka e tatau ona tuʻu i le amataga o soʻo se tusitusiga aoga.
    • Seti le fa'amuamua e iloa ai po'o fea mau e fa'amuamua pe a tele tusitusiga o lo'o ola.
  2. Fa'ai'uga: O lenei poloka e tatau ona tu'u i le pito o so'o se tusitusiga aoga
  3. Taimi tuai: milliseconds / sekone / minute
    • Seti le taimi masani ma filifili iunite.
    • O lenei poloka e mafai ona faʻaogaina e fai ma nofoaga e taofi ai i se tusitusiga.

ExampLe:Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (29)

Fa'aaliga: E tatau ona iai i taimi uma se fa'amaumauga aoga le poloka Script Start ma le Script End block.
E.  Tu'u ese: Alu ese mai le itulau
F.  Fa'asao: Fa'asaoina le fa'atulagaina
G.  Taufetuli: Amata fa'atino le tala
H.  Pin: Toso poloka e le mana'omia ile fa'ailoga talone e lafoa'i ai.
I.  Fa'ailoga Fa'atino: Fa'aali le fa'amaumauga o gaioiga a le Fa'atonu AI. 

Tusitala lomiga: Fa'asinomaga Faiga fa'atusaample

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (30)

A. Meapueata

Fa'ata'atia le folauga
Seti pe fa'afefea ona fa'aoso tulaga fa'ata'atia o 2-3 meapueata i le fa'asologa
Auala 1: Tofi se tulaga seti se tasi mo meapueata taitasi. O mea pu'eata ta'itasi e fa'agaoioi i lona tulaga fa'atonu i le fa'atonuga.
Auala 2: Fa'atulaga ni tulaga se lua mo meapueata taitasi. O mea pu'eata ta'itasi e fa'agasolo i o latou tulaga fa'atonu i le fa'atonuga.

Tau fa'atonu:

  1. Saosaoa gaioi (tikeri i le sekone) mo le meapueata pe a amata le tulaga faatulagaina.
  2. Taimi tuai(sekona)

Fa'atonuga meapueata

  • Si'i i se tulaga fa'apitoa po'o se tulaga o le fale
  • Saosaoa gaioi (tikeri i le sekone) mo le meapueata pe a amata le tulaga faatulagaina.

B. Fa'atulagaina

  1. Fa'atonu: Koluse / PBP
  2. Ata Vitio mo le Tele o Meapue: 1×1 / 1×2 / 1×3 / 2×2
  3. Punavai vitio i tulaga patino

C. Pulea

  1. Tusi amata:
    • O lenei poloka e tatau ona tuʻu i le amataga o soʻo se tusitusiga aoga.
    • Seti le fa'amuamua e iloa ai po'o fea mau e fa'amuamua pe a tele tusitusiga o lo'o ola.
  2. Fa'ai'uga: O lenei poloka e tatau ona tu'u i le pito o so'o se tusitusiga aoga.
  3. Taimi tuai: milliseconds / sekone / minute
    • Seti le taimi masani ma filifili iunite.
    • O lenei poloka e mafai ona faʻaogaina e fai ma nofoaga e taofi ai i se tusitusiga.
  4. Toe fa'atulagaina ile _ sekone: Fa'ailoa pe fia sekone e mana'omia a'o le'i fa'aoso le isi la'asaga.
  5. Toe Toe Faitau: E faafia ona toe fai le scrpt
  6. Taofi mau: Taofi le faatinoga o tusitusiga.
  7. Loop Script: O le a toe fai pea le tusitusiga.

ExampLe:
Fa'aaliga: E tatau i taimi uma ona aofia ai i se tusitusiga aoga le Script Start ma le Script End poloka.
Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (31)

D.  Tu'u ese: Alu ese mai le itulau
E.  Fa'asao: Fa'asaoina le fa'atulagaina
F.  Taufetuli: Amata fa'atino le tala
G.  Pin: Toso poloka e le mana'omia ile fa'ailoga talone e lafoa'i ai.
H.  Fa'ailoga Fa'atino: Fa'aali le fa'amaumauga o gaioiga a le Fa'atonu AI.

Fa'atonuga o Ata Vitio

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (32)
Leai Aitema Fa'amatalaga Galuega
1 Vitio Faiga Galue HDMI, UVC poʻo HDMI + UVC
 2  Suiga Su'ega Ua fa'atutuina le faiga mo le mata e tasi, ma o le suiga o meapueata e fa'aosoina e le fa'ailoga faaleotele leo.
   3    Ituaiga Fa'atulagaina Fa'atulaga le fa'atulagaina o le ata vitio e tusa ai ma le fa'asinomaga ua tu'uina atu i le vaega 2.5.1 Fuafuaga Fa'atino Vitio
  • Koluse: 4-vaega lau
  • PBP: Ata i Ata mata
  • Fa'ato'aga: Fa'ato'aga lau mata

Manatua Filifili na'o Cross/PBP
4 Tulaga Punavai Fa'apitoa / Ta'avale
 5  Fa'atulagaina Filifili pe fia ni ata pu'eata o le a fa'aalia ile lau. Tulaga: Fuafua po'o fea meapueata o le a fa'aalia i tulaga ta'itasi
6 Amata le Ata Vitio Kiliki le ki e amata ai pe taofi ai le vitio.

System- Network

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (33)
Fa'amatalaga Galuega
Seti Ethernet. A seti i le Static IP, e mafai ona suia tulaga. A maeʻa le faʻatulagaina, kiliki le Apply.

Faiga- Profile

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (34)
Leai Aitema Fa'amatalaga Galuega
1 Faasao e pei o le Pro Foufile Faasaoina tulaga o iai nei o se pro foufile / fa'ata'ita'iga fa'atulagaina.
2 Avega Profile La'u se pro sefefile / fa'ata'ita'iga fa'atulagaina.
 3  Profile O le ki o le a fa'aalia i luga o itulau ta'itasi ma e tutusa le galuega e pei o le Load Profile.

System- Seti-Masini

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (35)
Leai Aitema Fa'amatalaga Galuega
1 Gagana Igilisi
2 Igoa Meafaigaluega Cam Connect_Processor
3 Nofoaga Default_XXXX (O mataitusi mulimuli e fa o le tuatusi MAC)
4 Max Microphone Qty. 4 / 8 / 16 / 24

System- Seti- Feso'ota'iga Ta'avale

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (36)
Leai Aitema Fa'amatalaga Galuega
 1  Soʻotaga Otometi Ole masini faaleotele leo, meapueata ma le Vitio e mafai ona toe faʻafesoʻotaʻi aunoa pe a uma ona toe amataina le Pusa AI.
2 Otometi Faasao O le profile e mafai ona fa'asaoina otometi pe a mae'a se taimi fa'apitoa.
3. Ta'avale Ta'avale AI Fa'atonu o le a tamo'e aunoa.

Seti Fa'aopoopo 

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (37)
Leai
 1  Vitio Fa'asinomaga  (O le Lumens BC200 mea pu'eata e mana'omia ina ia mafai ai lenei galuega.) Le fa'afitauli e fa'atatau
E ono fa'aosoina le meapueata i so'o se leo, pe mafua mai i se tagata pe na'o se pisa fa'afuase'i. Faatasi ai ma le Lumens BC200 mea pu'eata fesoasoani, o le a le toe fa'aosoina na'o le leo. O le a faʻaogaina foʻi le faʻalauiloaina o foliga AI e iloa ai tagata i luga o le saite. O le mea pu'eata o le a fa'ato'a fa'aoso pe a o'o mai se fa'alogo leo ma foliga o le tagata e mafai ona iloa.
So'oga:E tatau ona feso'ota'i le mea pu'e pu'e pu'e pu'e pu'e pu'e pu'epu'e Lumens BC200. Ua fa'atulaga le BC200 e fa'alauiloa ile Q1 2025. Mo se fa'amatalaga auiliili, fa'amolemole va'ai ile tusi fa'aoga BC200 i lena taimi.
Meapueata Fesoasoani: Fa'amalo pe fa'amalo le meapueata BC200.
Su'esu'ega Sone Va'aiga: O lenei vaega e le aoga i le taimi nei ma e le mo le faʻaaogaina.
Talosaga: Kiliki e fa'aoga tulaga
  2    Leo Fa'asino  (O le Lumens leo uaea vaelua e mana'omia ina ia mafai ai lenei galuega.) Le fa'afitauli e fa'atatau
Ina ia mautinoa i le taimi o se fonotaga o le konafesi, o le leo mai le itu a le tagata faatau o le a le iloa e le pito i luga ole masini faaleotele leo mai lo tatou pito, lea e mafai ona faʻafuaseʻi ona faʻaosoina le mea pueata..
So'oga: Fa'afeso'ota'i masini uma e fa'aaoga ai le uaea leo Lumens splitter.
  • Faʻafesoʻotaʻi le tasi pito (faʻatasi ma mama e lua) i le komepiuta.
  • Fa'afeso'ota'i le isi pito (ma mama e tolu) i le pu Fa'asao i luga o le Cam Connect Pro.
  • O le pito ma se mama e tasi e tatau ona faʻafesoʻotaʻi i le failauga e puʻeina le leo.

Fa'aoso leo(dB):
Seti le fa'ailoga leo (-100~0 dB). O le masini faaleotele leo o le a na'o le fa'aosoina o le su'esu'ega pe a sili atu le leo i le tulaga fa'atulagaina.
Taimi (s) Su'esu'e: Seti le umi ole su'esu'ega (0~10 sekone)
Fa'amalo: Ki / Pepe
Talosaga: Kiliki e fa'aoga tulaga.

Faiga Fa'atonu: Web Tagata fa'aoga

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (38)
Leai Aitema Fa'amatalaga Galuega
1 Igoa Fa'aoga Pule
2 upu tuanai o le taimi nei O le password ua seti nei mo lau teugatupe.
3 Upu Fou Ulufale se upu faataga fou.
4 faamaonia le upu faalilolilo Toe fa'aofi lau fa'aupuga fou e fa'amaonia.

System- Seti- Tausiga

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (39)
Leai Aitema Fa'amatalaga Galuega
1 Firmware Version Fa'aali le fa'ailoga firmware o lo'o iai nei o le masini.
2 Siaki Ta'avale E otometi lava ona siaki pe maua se firmware fou.
3 Fa'afouga Firmware Fa'ataga oe e filifili ma fa'afou se firmware file mai lau komepiuta.
4 Fa'amaumauga o mea na tutupu O le ogalaau file fa'amaumau gaioiga ile taimi ma e mafai ona fa'atau atu i fafo.
5 Toe fai Toe amata le masini.
6 System Factory Toe setiina le masini i ona tulaga faaletonu falegaosimea.
7 Fa'atonu File Fa'aulufale mai / Fa'asalalau atu le fa'atulagaga o lo'o iai nei.

E uiga i

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (40)
Fa'amatalaga Galuega
O lenei faamalama o loʻo faʻaalia ai faʻamatalaga faʻamatalaga o AI-Box1.
Mo fesoasoani fa'apitoa, fa'amolemole su'esu'e le QR code i le pito i lalo taumatau

Feso'ota'i i polokalame fa'akoneseti vitiō

  • Seti le faiga fa'atino o AI-Box1 i le UVC po'o le HDMI+UVC, ona kiliki lea o le fa'amau o le Vitio
    Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (41)
  • Fa'alauiloa polokalame (pei o Skype, Zoom po'o Microsoft Teams)
  • Filifili Cam Connect e fai ma puna vitio
  • Igoa Puna Vitio: Lumens Cam Connect Processor

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (42)

Fa'atonuga faaleotelefoni

Fa'amolemole siaki le lisi lata mai o masini faaleotele leo lagolago ile Lumens webnofoaga. Lalo o examples. E le gata i nei masini faaleotele leo.
Aʻo leʻi faʻapipiʻi AI-Box1, e ono manaʻomia e le vaega lona tolu masini faʻapipiʻi.

Sennheiser 
A fa'aogaina le TCC2 ma le CamConnect, fa'atulaga ma fa'atulaga ala i luga ole polokalama Sennheiser Control Cockpit muamua. Ona o le faaletonu, e vaevae e Sennheiser se avanoa i 8 vaega tutusa i se tulimanu faalava o view. E fetaui ma le CamConnect Azimuth Angle 1 i le 8.

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (43)

Afai e mafai se vaega poloka i le Sennheiser Control Cockpit software, o le tulaga tutusa o CamConnect o le a afaina foi. Example: Afai o le nofoaga poloka ua setiina i le 0 ° i le 60 °, o le faailo leo mai le 0 ° i le 45 ° o le CamConnect Array Azimuth 1 ma le 45 ° i le 60 ° o le Array Azimuth 2 o le a le amanaiaina.

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (44)

Shure 
E fetaui lelei mo le fa'atulagaina o vaega tetele pe a ola le Shure Designer Automatic.

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (45)

Afai e mana'omia le fa'atulagaina sa'o lelei, fa'agata le fa'apipi'iina otometi, fetu'utu'una'i Gain value/Position ma le lima ma fa'aitiitia le fa'asolo o le beamforming angle, e maua ai le fa'atulagaina sa'o.

Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (46)

Fa'afitauli

O lenei mataupu o loʻo faʻamatalaina ai faʻafitauli e te ono feagai aʻo faʻaaogaina AI-Box1. Afai e tupu pea se faʻafitauli, faʻamolemole faʻafesoʻotaʻi lau tufatufaina poʻo le nofoaga autu o auaunaga.

LEAI Faafitauli Tali
1. Le mafai ona su'e meapueata
  1. Siaki le sapalai paoa o meapueata po'o le sapalai eletise PoE ua mautu.
  2. Ia mautinoa o mea pueata o loʻo i luga o fesoʻotaʻiga tutusa ma le Cam Connect AI-Box1.
  3. Sui uaea ma ia mautinoa e le o sese
2. Ua le mafai e le masini faaleotele leo ona iloa le tulaga o se leo Fa'amolemole fa'amaonia o le masini faaleotele leo o lo'o i le tulaga Feso'ota'i
3. A fa'aogaina se masini faaleotele leo Sennheiser, e leai se tali i se tulimanu patino
  1. Ia mautinoa o faʻatulagaga Azimuth Angle i le polokalama Cam Connect e aofia ai le tulaga faʻatau
  2. Siaki sone poloka ile polokalame Sennheiser Control Cockpit. Fa'asino i 5 Fa'atonu mea faaleotele leo mo fa'amatalaga.
4. A fa'atulaga tulaga fa'atulagaina meapueata, e gaoioi le meapueata pe a fa'alogoina se leo mai se isi itu. Faamolemole silasila i 2.1 Fa'atulagaina o Meafaigaluega e fa'amalo le su'eina o leo i le taimi o le fa'atulagaina o meapueata.
5. Le mafai ona fa'afeso'ota'i meapueata. Fa'amolemole maua le meapueata web interface ma alu i le Network tab. Ia mautinoa ua le atoatoa le Multicast. A tatalaina le Multicast, e le mafai e le AI-Box1 ona faʻafesoʻotaʻi le mea pueata.Lumens-CamConnect-Pro-AI-Box1-CamConnect-Processor- (1)
6. Le mafai ona fa'aleleia le firmware e le OTA.
  1.  Fa'amolemole siaki pe o lo'o e fa'aogaina le IP static.

Su'e ile DHCP ma toe taumafai e fa'afou.

Fa'atonu Feau

Leai Fe'au lapata'iga Gaioiga
1   E le mafai ona maua le masini faaleotele leo. Fa'amolemole siaki le tulaga o feso'ota'iga Microphone ma toe taumafai e fa'afeso'ota'i. Ia mautinoa ua sa'o le taina o le uafu o le masini faaleotele leo ma siaki pe o le tuatusi IP o loʻo i luga ole fesoʻotaʻiga tutusa ma le AI-Pusa. E mafai fo'i ona e va'ai i le so'otaga o lo'o i lalo mai mo nisi fa'amatalaga e uiga i le fa'atulagaina o auala fa'atasi ma masini fa'aoga talafeagai. https://www.mylumens.com/en/Downloads/3id2=5&keyword=ai%20box&keyword2=&pageSize=10&ord=
  2   Ma'imau So'oga. O le fesoʻotaʻiga i le va o le AI-pusa ma le masini faaleotele leo ua leiloa. Fa'amolemole siaki pe ua tape fa'afuase'i le masini faaleotele leo pe o iai se isi fa'afitauli feso'otaiga. Fa'asino i 3.1 Masini – Fa'atonu leo e siaki le tulaga faaleotele leo.
  3   Fa'aletonu feso'ota'iga meapueata Siaki pe sa'o le fa'atonuga o le meapueata ma le FPS i le Pusa AI. Avanoa i le meapueata webitulau e fa'amaonia lona feso'ota'iga feso'ota'iga. Fa'asino i 3.2 Meafaigaluega – Lisi meapueata e siaki iugafono o AI-Pusa1.

Fa'amatalaga Puletaofia 
Puletaofia © Lumens Digital Optics Inc. Ua taofia aia tatau uma.
Lumens ose fa'ailoga fa'ailoga ua resitalaina e Lumens Digital Optics Inc. Kopi, toe gaosia pe fa'asalalauina lenei mea. file e le fa'atagaina se'i vagana ua tu'uina mai se laisene e le Lumens Digital Optics Inc. pe se'i vagana ua kopiina lenei mea file is for the purpose of backup after purchasing this product. In order to keep improving the product, the information in this file e mafai ona suia e aunoa ma se fa'aaliga muamua. Ina ia fa'amalamalama atoatoa pe fa'amatala pe fa'afefea ona fa'aoga lenei oloa, e mafai e lenei tusi lesona ona fa'asino i igoa o isi oloa po'o kamupani e aunoa ma se fa'amoemoe e soli.
Fa'ate'aina o fa'atagaga: Lumens Digital Optics Inc. e le nafa mo so'o se fa'atekinolosi, fa'atonu mea sese po'o le fa'agaoioiga, e le nafa fo'i mo so'o se fa'alavelave fa'afuase'i po'o fa'alavelave fa'afuase'i e afua mai i le tu'uina atu o lenei mea. file, fa'aaogaina, po'o le fa'aogaina o lenei oloa.
Ina ia la'u mai le ta'iala lata mai o le Quick Start Guide, tusi lesona fa'aoga gagana, firmware, aveta'avale, ma fa'atonu modules, fa'amolemole asiasi mai  https://www.MyLumens.com/support

Pepa / Punaoa

Lumens CamConnect Pro AI-Box1 CamConnect Processor [pdf] Tusi Taiala
AI-Box1, CamConnect Pro AI-Box1 CamConnect Processor, CamConnect Pro AI-Bx1, CamConnect Processor, Processor

Fa'asinomaga

Fa'amatalaga Fa'atatau

Tuu se faamatalaga

E le fa'asalalauina lau tuatusi imeli. Fa'ailogaina fanua mana'omia *