COMMSCOPE CPP-UDDM-SL-1U-24 Tu'ufa'atasi Tu'ufa'atasiga Fa'asa'o
Fa'amatalaga
- ID meafaitino: 760237040
- Vaega Nu.: CPP-UDDM-SL-1U-24
- Fa'amatalaga: Unshielded Discrete Distribution Module Panel, SL, 1U, 24 port, Black
lautele
The CommScope® Unshielded discrete distribution module (UDDM) panels are available in a 24 port or 48 port, flat, angled or recessed angled configuration.
The panel consists of a rack mounted base unit, rear cable management, labels for port numbering, hardware kit and hook and loop straps. Each panel mounts in a 19-inch (483mm) equipment rack with universal hole spacing. Ordering information is listed below:
| Mea ID | Vaega Nu. | Fa'amatalaga |
| 760237040 | CPP-UDDM-SL-1U-24 | Unshielded Discrete Distribution Module Panel, SL, 1U, 24 port, Black |
| 760237041 | CPP-UDDM-SL-2U-48 | Unshielded Discrete Distribution Module Panel, SL, 2U, 48 port, Black |
| 760237042 | CPPA-UDDM-SL-1U-24 | Unshielded Angled Discrete Distribution Module Panel, SL, 1U, 24 port, Black |
| 760237043 | CPPA-UDDM-SL-2U-48 | Unshielded Angled Discrete Distribution Module Panel, SL, 2U, 48 port, Black |
| 760237044 | CPPR-UDDM-SL-1U-24 | Le Fa'a'ese'ese Fa'a'ese'ese Fa'afanua Fa'a'ese'ese Fa'asoa Fa'asoa Vaega Panel, SL, 1U, 24 uafu, Black |
| 760237045 | CPPR-UDDM-SL-2U-48 | Le Fa'a'ese'ese Fa'a'ese'ese Fa'afanua Fa'a'ese'ese Fa'asoa Fa'asoa Vaega Panel, SL, 2U, 48 uafu, Black |
| 760237052 | CPP-UDDM-KJ-1U-24 | Unshielded Discrete Distribution Module Panel, Keystone, 1U, 24 port, Black |
| 760241547 | CPP-UDDM-KJ-2U-48 | Unshielded Discrete Distribution Module Panel, Keystone, 2U, 48 port, Black |
| 760250319 | CPPA-UDDM-KJ-1U-24-WH | Unshielded Angled Discrete Distribution Module Panel, Keystone, 1U, 24 port, White |
| 760250320 | CPPA-UDDM-KJ-2U-48-WH | Unshielded Angled Discrete Distribution Module Panel, Keystone, 2U, 48 port, White |
| 760253047 | CPPA-UDDM-KJ-1U-24 | Unshielded Angled Discrete Distribution Module Panel, Keystone, 1U, 24 port, Black |
| 760253048 | CPPA-UDDM-KJ-2U-48 | Unshielded Angled Discrete Distribution Module Panel, Keystone, 2U, 48 port, Black |
Fa'aaliga: sample ata oloa o loʻo faʻaalia i lalo mo faʻamatalaga.
Meafaigaluega Manaomia
- Faovilivili ulu Phillips.
- Flat blade screwdriver, max 2.9mm dia.
Lisi Vaega
Fa'amaonia vaega fa'asaga i vaega lisi o lo'o i lalo:
|
24- Taulaga Laupapa Mafolafola |
48- Taulaga Laupapa Mafolafola |
Tele
24- Taulaga 48-Port Ang Panel Ang panel |
24- Taulaga R-Ang Panela |
48-Taulaga R-Ang Panela |
Fa'amatalaga | |
| 1 | ― | ― | ― | ― | ― | 24-taulaga laulau mafolafola |
| ― | 1 | ― | ― | ― | ― | 48-taulaga laulau mafolafola |
| ― | ― | 1 | ― | ― | ― | 24-tauga fa'aitu laulau |
| ― | ― | ― | 1 | ― | ― | 48-tauga fa'aitu laulau |
| ― | ― | ― | ― | 1 | ― | 24-taulaupapa fa'amau fa'aitu panel |
| ― | ― | ― | ― | ― | 1 | 48-taulaupapa fa'amau fa'aitu panel |
| 1 | 1 | 1 | 1 | 1 | 1 | P12-24 x ½” mounting screw kit |
| 1 | 2 | 1 | 2 | 1 | 2 | Pusa fa'ailoga |
| 1 | 2 | 1 | 2 | 1 | 2 | Rear cable management |
| 1 | 2 | 1 | 2 | 1 | 2 | Hook-and-loop straps kit |
LAPATA’IGA – Fa’atonuga Taua mo le Saogalemu
Pe a faʻaaogaina lenei oloa, e tatau ona mulimulitaʻia puipuiga faʻavae saogalemu e faʻaitiitia ai le lamatiaga o le afi, eletise, ma manuʻa i tagata:
- Aua ne'i fa'apipi'i uaea feso'ota'iga i nofoaga susu se'i vagana ua fa'atulaga mo nofoaga susu.
- Aua ne'i fa'apipi'iina lenei oloa ile taimi ole afā uila. O lo'o i ai se fa'alavelave mamao ole te'i eletise.
- 'Aua ne'i pa'i i uaea feso'ota'iga e le'i fa'apupulaina po'o fa'amau se'i vagana ua motusia le feso'ota'iga i le feso'otaiga feso'ota'iga.
- Lapata'iga: O uaea uma e fa'afeso'ota'i i nei masini e tatau ona fa'amalieina tulafono fa'alotoifale ma le atunu'u ma tulaga fa'alava feso'ota'iga mo uaea feso'ota'iga.
Installation of Panel
Laasaga 1 - Mauga Panel i Fata
Step 2 – Assemble Rear Cable Management and Other Accessories
Attach rear cable management as shown and insert four hook-and-loop straps to the rear cable management.
Step 3 – Populate Panel with Jacks (Jacks ordered separately)
24-Port Panel
- Connect cables to jacks per instructions provided with the individual jacks.
- Populate panel with jacks and route cabling as shown.
Fa'aaliga: Secure cables using the hook-and-loop straps provided.
Laasaga 4 – Fa'apipi'i Fa'ailoga Fa'amatalaga
- Enter information on the white information labels provided in label holder kits. Snap holders into panel modules and insert labels into label holders as shown in the above image.
- To print a designation label
- Alu i le http://www.commscope.com/Resources/Labeling-Templates and scroll down to “Copper Panels” and select the proper label template. Or go to https://www.commscope.com/ and search individual part number (material ID).
- Select the part number and scroll down to the “documentation and downloads” section. In the template section, select the required label size.
Fa'aaliga: Fa'ailoga webe lua filifiliga mo le lolomiina o igoa; lapo'a mata'itusi ma le lapo'a A4.
- Insert a small, 2.9mm dia. max flat-blade screwdriver into the slot above the jack and rotate to release the latch.
- Remove jack from rear of panel.
- Manatua – rear cable management may need to be removed to enable access to the release slot on some jack positions.
Fefa'ataua'iga-fa'ailoga
O fa'ailoga tau fefa'ataua'iga uma ua fa'ailoa mai e ® po'o ™ o fa'ailoga fa'amaufa'ailoga po'o fa'ailoga tau fefa'ataua'iga, a le CommScope, Inc. O lenei pepa e mo na'o fuafuaga ma e le o fa'amoemoe e suia pe fa'aopoopo i so'o se fa'amatalaga po'o fa'amaonia e feso'ota'i ma oloa po'o tautua a CommScope. CommScope ua tuuto atu i tulaga aupito maualuga o le faamaoni pisinisi ma le faatumauina o le siosiomaga, faatasi ai ma le tele o nofoaga a le CommScope i le lalolagi atoa ua faamaonia e tusa ai ma tulaga faava o malo, e aofia ai ISO 9001, TL 9000, ma ISO 14001.
O isi fa'amatalaga e uiga i le tautinoga a CommScope e mafai ona maua ile: https://www.commscope.com/corporate-responsibility-and-sustainability/.
Fa'amatalaga fa'afeso'ota'i
Asiasi i la matou webnofoaga pe fa'afeso'ota'i le sui o le CommScope i lou lotoifale mo nisi fa'amatalaga.
Mo fesoasoani faʻapitoa, auaunaga faʻatau, poʻo le lipotia o soʻo se vaega o loʻo misi/faʻaleagaina, asiasi mai ia i matou i: http://www.commscope.com/SupportCenter Or Contact PartnerPRO Network Partner https://www.commscope.com/partners/
O lenei oloa e mafai ona ufiufi e se tasi pe sili atu pateni US poʻo a latou mea tutusa mai fafo. Mo pateni, vaai www.cs-pat.com
Puipuiga o le Saogalemu
When using this product, follow these safety precautions to reduce the risk of fire, electric shock, and injury:
- Never install communications wiring in wet locations unless designed for wet areas.
- Avoid installation during lightning storms due to the risk of electric shock.
- Avoid touching uninsulated communication wiring or terminals unless disconnected at the network interface.
- Ensure all wiring connected to the equipment meets local and national building codes and network wiring standards.
FAQ's
E fetaui lelei nei paneta mo le fa'aoga i fafo?
No, it is recommended to avoid installing communications wiring in wet locations unless specifically designed for such environments.
O a meafaigaluega e manaʻomia mo le faʻapipiʻiina?
You will need a Phillips head screwdriver and a flat blade screwdriver with a maximum diameter of 2.9mm.
Pepa / Punaoa
 |
COMMSCOPE CPP-UDDM-SL-1U-24 Tu'ufa'atasi Tu'ufa'atasiga Fa'asa'o [pdf] Fa'atonu Taiala CPP-UDDM-SL-1U-24, CPP-UDDM-SL-2U-48, CPPA-UDDM-SL-1U-24, CPPA-UDDM-SL-2U-48, CPPR-UDDM-SL-1U-24, CPPR-UDDM-SL-2U-48, CPP-UDDM-Diste-SL-1 Talipupuni CPP-UDDM-SL-24U-1, Faʻasalalauga Faʻasalalau Faʻasalalau e leai se puipuiga, Faʻasalalauga Faʻasalalau Faʻasalalau, Faʻasalalauga Faʻasalalau |