LS G100 Fesuia'i Speed Drive
Fa'amatalaga o oloa
O le LS G100 o se fa'aliliuga fa'asolosolo lea e fa'aoga fa'atasi ma le Vaega e Fa'afoeina le Ea (AHU). O lenei tusi lesona o loʻo taulaʻi atu i le faʻatonutonuina ma fesoʻotaʻiga o le LS G100. O le faʻapipiʻiina o le faʻaliliuga faʻasolosolo ma mea autu ma uaea afi e tatau ona faia e tusa ai ma le LS G100 Manual. O le tusi lesona o loʻo tuʻuina atu ai se lisi o faʻamaufaʻailoga ma o latou tau tutusa mo le faʻatulagaina o le LS G100. O vaega nei e aofia ai le ramp-o le taimi, ramp-taimi i lalo, taimi aupito maualuga, fua U/f, ituaiga o uta, puipuiga o le mamafa, numera o pou afi, faʻamau faʻaseʻe, faʻamauina o loʻo i ai nei, faʻaogaina le taimi nei, ma le galuega faʻaoga P5. O loʻo i ai faʻasalalauga eseese o loʻo tuʻuina atu i totonu o le tusi lesona, e aofia ai le faʻaogaina o le lotoifale e faʻaaoga ai le faʻapipiʻi faʻapipiʻiina ma le mamao mamao ma le tolu saoasaoa. Mo fa'atonuga ta'itasi, o fa'aputuga fa'aopoopo o lo'o fa'amaoti mai e fa'atulaga ai le amataga/taofi puna, alavai fa'apogai, ma saoasaoa faifaipea. O lo'o iai fo'i i le tusi lesona fa'amatalaga e uiga i iunite ta'avale fa'atasi ma faiga fa'atonutonu VTS ma AHU fa'atasi ai ma VTS fa'atonu ituaiga uPC3. Parameters mo nei faʻatonuga e tuʻuina atu e seti ai le amataga / taofi puna, faʻaupuga alavai, tuatusi, fesoʻotaʻiga fesoʻotaʻiga, saoasaoa o fesoʻotaʻiga, ma fesoʻotaʻiga fesoʻotaʻiga.
Fa'atonuga o le Fa'aaogaina o Mea
Mo fa'atonuga uma, seti le lisi fa'amaufa'ailoga masani:
| Parameter | Code | Taua | Fa'amatalaga |
|---|---|---|---|
| Ramp taimi umi | ACC | 45 | Fautuaina 45 s. |
| Ramp taimi malolo | deC | 45 | Fautuaina 45 s. |
| Tele taimi masani | dr-20 | 100 | – |
| Fa'atatau taimi | dr-18 | * | – |
| U/f fua faatatau | Ad-01 | 1 | uiga sikuea |
| Tulaga uta | Pr-04 | 0 | Tiute mama / ili |
| Puipuiga ova | Pr-40 | 2 | Malosi |
| Numera o pou afi | bA-11 | * | 2-12 |
| Fa'ailoga fa'ailoga | bA-12 | ** | – |
| Fa'atatau i le taimi nei | bA-13 | * | – |
| Fa'aletonu le ta'avale | bA-14 | ** | – |
| P5 fa'aoga galuega | IN-69 | 4 | Tapulaa ki |
Fa'atonuga e aunoa ma ni fa'atonu VTS
Pulea fa'apitonu'u e fa'aaoga ai le vaega fa'atonutonu fa'atasi:
Seti ta'iala faaopoopo:
| Parameter | Code | Taua |
|---|---|---|
| Puna amata/tu'u | mamago | 0 |
| Punavai masani | Frq | 0 |
Fa'aoga le RUN ma le STOP/RST fa'amau i luga o le fa'atonu fa'atasi e pulea ai le ta'avale. Fa'aoga fa'amau po'o le potentiometer e fa'atulaga ai le fa'atele.
2.2 Pulea mamao ma tolu saoasaoa:
Seti ta'iala faaopoopo:
| Parameter | Code | Taua |
|---|---|---|
| Puna amata/tu'u | drv | 0 |
| Punavai masani | Frq | 0 |
| Saosaoa tumau 1 | St1 | * |
| Saosaoa tumau 2 | St2 | * |
| Saosaoa tumau 3 | St3 | * |
Fa'aoga mea fa'aoga P1/P3/P4/P5 e seti ai le galuega aveta'avale mana'omia (1=on, 0=off). O fa'atatauga fa'aoga tutusa o: 0000 = STOP, 1100 = AMATA, 1ST SPEED, 1110 = AMATA, 2ND SPEED, 1111 = START, 3RD SPEED.
Vaega fa'avevela fa'atasi ma le VTS fa'atonu faiga:
Seti ta'iala faaopoopo:
| Parameter | Code | Taua |
|---|---|---|
| Puna amata/tu'u | drv | 1 |
| Punavai masani | Frq | 5 |
| Saosaoa tumau 1 | St1 | * |
| Saosaoa tumau 2 | St2 | * |
| Saosaoa tumau 3 | St3 | * |
Fa'aoga mea fa'aoga P1/P3/P4/P5 e seti ai le galuega aveta'avale mana'omia (1=on, 0=off). O fa'atatauga fa'aoga tutusa o: 0000 = STOP, 1100 = AMATA, 1ST SPEED, 1110 = AMATA, 2ND SPEED, 1111 = START, 3RD SPEED.
AHU fa'atasi ai ma VTS fa'atonu ituaiga uPC3:
Ina ia faʻatagaina le faʻatonutonuina o avetaʻavale faʻasolosolo G100, seti le ituaiga VFD i le G100 i le uPC3 faʻatulagaina (HMI Advanced mask I03).
Seti ta'iala faaopoopo:
| Parameter | Code | Taua |
|---|---|---|
| Puna amata/tu'u | drv | 3 |
| Punavai masani | Frq | 6 |
| tuatusi | CM-01 | 2 |
| Comm. maliega faʻavae | CM-02 | 3 |
| Comm. saosaoa | CM-03 | 5 |
| Na saunoa Comm. tapula'a | CM-04 | 7 |
Fa'aaoga le Modbus RS-485 e fai ma feso'ota'iga feso'ota'iga ma le saoasaoa o le 9600 bps ma le 8N1 fa'asologa. Ina ia toe faʻafoʻi le G100 i tulaga faʻaletonu, seti dr-93 = 1 ma tape le eletise. v1.01 (08.2023)
O LE TUSI LELEI O LO'O FA'AMATALAGA AI LE ILOA LELEI I FA'AVAE FA'AVAE FA'AVAE FA'A'OFIA I LE IUNITE TAU LE EA (AHU). O LENEI MANUAL E MANA'INA NA'O LE PULEGA MA FESOOTAIGA. O LE FA'ATAUINA O LE FA'AVAE FA'AVAE MA LE FA'ATAUINA O UIGA AUTU MA MOTOR E TATAU ONA FAIA E tusa ai ma le LS G100 MANUAL.
LISI O LE Vaega
MO FA'AIGA UMA FA'ATU LE LISI PARAMETER MASANI
| Parameter | Code | Taua | Fa'amatalaga |
| Ramp taimi umi | ACC | 45 | Fautuaina 45 s. |
| Ramp taimi malolo | deC | 45 | Fautuaina 45 s. |
| Tele taimi masani | dr-20 | 100 | – |
| Fa'atatau taimi | dr-18 | * | – |
| U/f fua faatatau | Ad-01 | 1 | uiga sikuea |
| Tulaga uta | Pr-04 | 0 | Tiute mama / ili |
| Ova le mamafa puipuiga | Pr-40 | 2 | Malosi |
| Numera o pou afi | bA-11 | * | 2-12 |
| Fa'ailoga fa'ailoga | bA-12 | ** | – |
| Fa'atatau i le taimi nei | bA-13 | * | – |
| Fa'aletonu le ta'avale | bA-14 | ** | – |
| P5 fa'aoga galuega | IN-69 | 4 | Tapulaa ki |
e tusa ai ma ta'iala fa'amaumauga afi e tatau ona fa'atatauina
- fa'ailoga fa'ailoga = (1 – numera o pou afi * fua fa'atatau / 6000) * 50 Hz
- fa'agasolo le taimi nei = 0,3 * fa'atatau i le taimi nei
FA'ATA'IGA E LE'I VTS PULE
Pulea fa'apitonu'u e fa'aaoga ai le vaega fa'aopoopo tu'ufa'atasia Seti fa'asologa fa'aopoopo:
| Parameter | Code | Taua | Fa'amatalaga |
| Puna amata / taofi | drv | 0 | Keypad |
| Punavai masani | Frq | 0 | Potometometi |
Fa'aoga le RUN ma le STOP/RST fa'amau e pulea ai le ta'avale Fa'aaoga fa'amau / potentiometer e seti ai taimi
Pulea mamao ma tolu saoasaoa
Seti ta'iala faaopoopo:
| Parameter | Code | Taua | Fa'amatalaga |
| Puna amata / taofi | drv | 1 | Mea e mafai ona fa'apolokalameina |
| Punavai masani | Frq | 4 | Saosaoa faifai pea |
| Saosaoa tumau 1 | St1 | * | 0-100 Hz |
| Saosaoa tumau 1 | St2 | * | 0-100 Hz |
| Saosaoa tumau 1 | St3 | * | 0-100 Hz |
| 0000 = TOTO |
| 1100 = AMATA, 1ST SAVE |
| 1110 = AMATA, 2 SAOPOTI |
| 1111 = AMATA, 3 SAOPOTI |
IUNIGA FA'AVAE MA LE VTS PULEGA
Seti ta'iala faaopoopo:
| Parameter | Code | Taua | Fa'amatalaga |
| Puna amata / taofi | drv | 1 | Mea e mafai ona fa'apolokalameina |
| Punavai masani | Frq | 5 | Saosaoa faifai pea |
| Saosaoa tumau 1 | St1 | * | 0-100 Hz |
| Saosaoa tumau 1 | St2 | * | 0-100 Hz |
| Saosaoa tumau 1 | St3 | * | 0-100 Hz |
e tusa ai ma mana'oga a le tagata fa'aoga Fa'aaoga mea fa'aoga P1/P3/P4/P5 e seti ai le galuega aveta'avale mana'omia (1=on,0=off)
| 0000 = TOTO |
| 1100 = AMATA, 1ST SAVE |
| 1110 = AMATA, 2 SAOPOTI |
| 1111 = AMATA, 3 SAOPOTI |
AHU MA VTS PULE ITIGA uPC3
FAAMANATU! Ina ia fa'ataga le fa'atonutonuina o aveta'avale fa'asolosolo G100, fa'atulaga le VFD i le G100 ile fa'atulagaga uPC3 (HMI Advanced mask I03).
Seti ta'iala faaopoopo:
| Parameter | Code | Taua | Fa'amatalaga |
| Puna amata / taofi | drv | 3 | Modbus RS-485 |
| Punavai masani | Frq | 6 | Modbus RS-485 |
|
tuatusi |
CM-01 |
2 | Sapalai 1 |
| 3 | Usu 1 | ||
| 5 | Sapalai 2/ toe fa'aalu | ||
| 7 | Sapalai 3 | ||
| 9 | Sapalai 4 | ||
| 6 | Su'e 2 / fa'agasolo | ||
| 8 | Usu 3 | ||
| 10 | Usu 4 | ||
| Comm. maliega faʻavae | CM-02 | 0 | Modbus RS-485 |
| Comm. saosaoa | CM-03 | 3 | 9600 bps |
| Na saunoa Comm. tapula'a | CM-04 | 0 | 8N1 |
FAAMANATU! Ina ia toe faʻafoʻi le G100 i tulaga faʻaletonu seti dr-93 = 1 ma tape le eletise.
Pepa / Punaoa
 |
LS G100 Fesuia'i Speed Drive [pdf] Tusi Taiala G100 Fesuia'i Saosaoa Ta'avale, G100, Su'esu'e Saosaoa Avega, Va'a Saosaoa |