SLV 1007333 Downlight Ring without Socket Instruction Manual

SLV 1007333 Downlight Ring without Socket

Product Information

• Product Name: Downlight Installation Ring without Socket
• Model Numbers: 1007328, 1007329, 1007330, 1007331, 1007332, 1007333, 1007334, 1007335
• Weight: 0.06 kg
• Dimensions: 68 mm
• Compatible Socket: GU10
• Compatible LED Module: SLV 1007283, 1000909
• Additional Components: LED Module SLV 1007381, 1007421, 1007382, 1007422, 1007383, 1007431, 1007384, 1007432

Product Usage Instructions

1. Read the manual carefully and keep it for future reference.
2. Ensure your safety during installation and operation by following the provided safety advices.
3. Do not alter or modify the product in any way.
4. Avoid fastening anything on the product or covering it.
5. Use the product only in combination with a suitable GU10 socket or LED module.
6. Make sure the product is firmly fixed on an even surface.
7. Operate the product only on normal or non-inflammable surfaces.
8. Use the product only in dry indoor areas.
9. Avoid subjecting the product to mechanical strain or strong dirt contamination.
10. For care and storage, disconnect the product from the mains and let it cool down.
11. Regularly clean the external surfaces of the product with a slightly moistened cloth.
12. Store the product in a dry and clean place.
13. The product is suitable for recessed ceiling installation. Keep a sufficient distance from inflammable materials.
14. Ensure sufficient aeration during installation.
15. Check the secure fixation and proper function of the product.

WHAT’S INCLUDE

INSTALLATION

• Only suited for recessed ceiling installation.
• Keep sufficient distance to inflammable materials.
• Ensure sufficient aeration.
• Install as shown in the figure.

Check secure fixation and proper function!

SPECIFICATION

SAFETY INSTRUCTION

• Read manual carefully and keep for further use!
• Safety advices for installation and operation.
• Disregard may lead to danger of life, burning or fire!
• Do not alter or modify the product.
• Do not fasten anything on the product.
• Do not cover the product.
• Additional safety advices =

Use as directed

• Use only in combination with a suitable GU10 socket or LED module.
• Operate only firmly fixed on an even surface.
• Operate only on normal or not inflammable surfaces.
• Operate only in dry indoor area.
• Do not strain mechanically or expose to strong dirt contamination.

Care / Storage

Disconnect product from mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.

0001 26.04.2023 © SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.