Assembly Instructions

Care Instructions

Wipe clean with a soft damp cloth. Never use scourers, abrasives or chemical solvents. Keep away from moisture and direct sunlight. Store in a dry place. For indoor use only.

Warning

This item is for storage purposes only. Contains small parts. It is to be assembled by an adult. Failure to follow these warnings could result in serious injury. Suitable for flat surfaces only.

Maximum safe load: 2kg.

Step 1

The first step involves preparing the main drawer unit and attaching the drawer runners. The diagram shows the main drawer box labeled with '1'. Two sets of drawer runners are depicted, labeled with '2' and '3'. The runners labeled '2' are attached to the sides of the drawer box. The runners labeled '3' are shown being attached to the inside of the desk or surface where the drawer will be mounted.

Visual representation:

• A diagram shows the main drawer box (1).
• Two pairs of drawer runners are shown. One pair is labeled '2' and the other '3'.
• Arrows indicate that runners '2' are attached to the sides of the drawer box.
• Arrows indicate that runners '3' are attached to the interior of the desk surface.

Step 2

The second step focuses on mounting the drawer unit to the desk. The diagram shows the drawer unit with runners '2' attached. It also shows the runners '3' already mounted to the desk surface. The process involves aligning the runners on the drawer unit with the runners on the desk and sliding the drawer into place.

Visual representation:

• The drawer unit with runners '2' is shown.
• The desk surface with runners '3' attached is shown.
• Arrows indicate that the drawer unit is to be slid onto the desk runners.
• A close-up view labeled 'Table' shows the runners attached to the underside of the table surface.
• The final image shows the assembled drawer unit mounted under the table.