HILTI-LOGO

Orodje za nastavitev HILTI SDK2-PDK2

HILTI-SDK2-PDK2-Setting-Tool-PRODUCT

Navodila za uporabo izdelka

  • Combine the SDK2/PDK2 with the X-ENP-19 component.
  • Ensure the parts are aligned correctly as shown in the diagram.
  • Use the SDK2/PDK2 Setting Tool. The tool should be positioned as illustrated to ensure proper installation.
  • Use a hammer to gently tap the setting tool. Ensure the tool is upright and stable.
  • Avoid hitting the tool at an angle to prevent damage.
  • Repeat the hammering process three times to secure the installation.
  • Ensure each strike is firm and consistent.

Navodila za namestitev

HILTI-SDK2-PDK2-Setting-Tool-FIG-1

Sealing cap for nails used in exposed roofs and cladding

  • Application: Waterproofing
  • For use with (tools): BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
  • Corrosion protection: Stainless steel A4(316) or equivalent

Choose options

  • Višina: 0.6 in
  • Premer: 7/8 in
  • Fastener shank length: 15/16 in
  • Velikost pakiranja: 100 kos

Možnosti izdelka

  • Sealing cap SDK2 #52708

Količina

  • 1/ Package

Total pieces

  • 100

You can not see your company prices

  • Please log in or register to see your company prices. Prices vary for Hawaii, Alaska, and U.S. territories.

Funkcije in aplikacije

Lastnosti

  • Water-resistant and visually clean
  • Easy assembly with the setting tool and hammer

Aplikacije

  • Water-resistant sealing of X-ENP-19 nails in steel fastening applications
  • SDK2 stainless steel sealing caps for water resistance in roof deck applications
  • PDK2 plastic caps for water resistance in siding applications

Tehnični podatki

  • Application: Waterproofing
  • For use with (tools): BX 3, DX 351, DX 460, DX 5, DX 6, GX 120, GX 3
  • Corrosion protection: Stainless steel A4(316) or equivalent
  • Environmental Conditions: Dry indoor
  • Odobritve: N/A
  • Base materials: Steel
  • Product Class: Premium

pogosta vprašanja

  • What is the purpose of the SDK2/PDK2?
    • The SDK2/PDK2 is used for secure installations in construction or assembly projects.
  • How many times should I strike the setting tool?
    • You should strike the setting tool three times to ensure a secure fit.
  • Can I use any hammer for the installation?
    • Yes, but ensure the hammer is used correctly to avoid damaging the components.

Dokumenti / Viri

Orodje za nastavitev HILTI SDK2-PDK2 [pdf] Navodila za uporabo
SDK2, PDK2, orodje za nastavitev SDK2-PDK2, SDK2-PDK2, orodje za nastavitev

Reference

Pustite komentar

Vaš elektronski naslov ne bo objavljen. Obvezna polja so označena *