Logotip Elitech

Elitech LogEt 6 zapisovalnik podatkov o temperaturi

Elitech-LogEt-6-Temperature-Data-Logger-product

Varnostna navodila in previdnostni ukrepi

Varnostna navodila
Za pravilno namestitev in uporabo tega izdelka preberite in dosledno upoštevajte naslednje pogoje:

Baterija

  • Please use original or technically compatible batteries. Do not use batteries that do not meet product specifications to prevent damage to equipment or other malfunctions.
  • Baterij ne razstavljajte, stiskajte, udarjajte ali segrevajte v zasebnosti in jih ne mečite v ogenj, saj lahko to povzroči eksplozijo in požar.

Zunanje napajanje:

  • When external power supply is required, please use the power adapter configured for this device.
  • Do not use other power adapters that do not meet the external connection technical specifications, otherwise it may damage the instrument and equipment, and even cause a fire power supply.

Oprema

  • In flammable and explosive gas environments, please use this equipment in accordance with compliance requirements; otherwise, it may cause explosions and fires
  • Če med uporabo naprave oddaja vonj po zažganem ali drug vonj, je treba takoj prekiniti napajanje in pravočasno stopiti v stik s proizvajalcem ali dobaviteljem.

Pozor

  • Če opreme ne uporabljate dlje časa, jo je treba odstraniti in shraniti v embalaži na suhem in hladnem mestu.
  • Uporabnikom ni dovoljeno izvajati nepooblaščenih sprememb na tej napravi. Kakršne koli nepooblaščene spremembe lahko vplivajo na natančnost naprave in jo celo poškodujejo.
  • Naprave ne uporabljajte v zahtevnih okoljih, da preprečite kratke stike, opekline in druge okvare, ki jih povzročijo neugodne vremenske razmere, kot sta dež in strele.
  • When the recorder is offline (no data upload), please confirm the networking status of the device
  • Prosimo, uporabljajte znotraj merilnega območja snemalnika
  • Please mistakenly place the external probe directly in a liquid environment to avoid equipment damage
  • Prosimo, da snemalnika ne udarjate s silo.
  • Na izmerjene vrednosti snemalnika lahko vplivajo naslednji dejavniki

Temperaturna napaka
Placed in the measurement environment for too short a stable time Close to heat sources, cold sources, or directly in a water soaked state

Napaka vlažnosti

  • V merilnem okolju je bil postavljen prekratek stabilen čas
  • Dolgotrajna izpostavljenost pari, vodni meglici, vodnim zavesam ali kondenzacijskemu okolju

Onesnaženost:

  • Biti v prašnem ali drugem onesnaženem okolju

Konec izdelkaview in videz

LogEt 6 is a disposable dry ice recorder with a built-in probe. Equipped with ultra-low temperature sensors as standard, the entire machine can directly record temperature in an environment of -85 ° C. It can export reports or automatically generate PDF files through data center software, with 16000 sets of storage, 30 days of battery life, 2 years of shelf life, and support for shadow data function before and after. Widely used in freezers, medical insulation boxes, laboratories, and other scenarios.Elitech-LogEt-6-Temperature-Data-Logger-fig-1

  1. USB vmesnik
  2. LED
  3. LCD zaslon
  4. Gumb Stop
  5. Gumb za zagon
  6. External probe interface (reserved)
  7. Nosilec baterijeElitech-LogEt-6-Temperature-Data-Logger-fig-2
  1. max/min/avr/MTK/log quantity
  2. zgornja meja
  3. spodnja meja
  4. delovno stanje
  5. raven baterije
  6. Temperature/humidity values
  7. datum
  8. čas

Model list and specifications

Seznam modelov

Model Dnevnik 6
konfiguracijo PT
probe Type Built in ultra-low temperature (dry ice)
Main sensor parameters temperaturni senzor
Območje merjenja temperature -85 ℃ ~ 50 ℃
Natančnost merjenja temperature ±0.5℃(-20℃~40℃);±1℃(other)
Temperaturna ločljivost 0.1 ℃

Specifikacije

Zmogljivost shranjevanja 16000
Podatkovni vmesnik USB A
Baterija LS14250 lithium battery
Rok uporabnosti 2 leti
Življenjska doba baterije 30Days(log interval5min)
Communication module/mode USB vmesnik
Stopnja zaščite IP65
Product dimensions (height*length*width) 100*46*19 mm
Teža 60 g
Delovno okolje -85˚C~50˚C
Fizični gumbi Start/Stop
Metoda alarma LED
Adaptation software Elitechlog

Navodila za uporabo

Ključne funkcije
Start button: In normal display mode, press the start button to display the current temperature, and continue pressing to switch temperature data, date and time, number of records, maximum value, and minimum value; Press and hold for 5 seconds to start recording; Stop button: Long press for 5 seconds to stop recording;

Legend status indication

Elitech-LogEt-6-Temperature-Data-Logger-fig-3

Delovanje programske opreme

Prenesite programsko opremo
Download and install the “Jingchuang Data Center” software www.e-elitech.com/xiazaizhongxin (China), www.elitechlog.com/software (other countries)

Branje podatkov

  1. Connect the computer using a USB interface
  2. Open the “Jingchuang Data Center” and wait for the link to complete.
  3. Open the PDF file directly on my computer or open the summary/historical data of “Jingchuang Data Center” to view podatke.

Opombe
Data can be directly read without the need for the “Jingchuang Data Center” software After the device is taken out of a low-temperature environment, it needs to be left to stand for a period of time and wait for it to return to room temperature before the LCD screen displays data

Izvoz podatkov
Click on Summary/Historical Data, select Export Data, and choose the format to export

Seznam dodatne opreme

  • Host * 1, instruction manual (electronic version), calibration certificate (electronic version)

Garancija in poprodajne storitve

Garancija na izdelek: 1 leto
Ta izdelek lahko vrnete, zamenjate ali popravite v 7 dneh od datuma nakupa zaradi nedelujočega delovanja. Garancijska doba je eno leto od datuma nakupa (na podlagi veljavnih računov o nakupu). V garancijskem roku bodo vse okvare, ki nastanejo zaradi težav s kakovostjo izdelka pri normalni uporabi, odpravljene brezplačno. Stroške pošiljanja za popravilo izdelka enostransko krije pošiljatelj.

If any of the following situations are met, it is not within the scope of the after-sales guarantee:

  1. Damage caused by force majeure, such as earthquakes, fires, floods, typhoons, etc;
  2. Damage caused by human factors, such as improper use, maintenance, and storage by consumers.
  3. Damage caused by maintenance, disassembly, etc. by non-precision service personnel or authorized service providers;
  4. Preseg garancijske dobe in obsega;
  5. Naravna obraba, poraba in staranje izdelkov (kot so lupine, kabli itd.).

pogosta vprašanja

V: Kaj naj storim, če naprava oddaja nenavaden vonj?
A: Immediately disconnect the power supply and contact the manufacturer or supplier for assistance.

V: Kako začnem snemati na napravi?
A: Press and hold the Start button for 5 seconds to initiate recording.

Dokumenti / Viri

Elitech LogEt 6 zapisovalnik podatkov o temperaturi [pdf] Navodila za uporabo
01, 02, LogEt 6 Zapisovalnik podatkov o temperaturi, LogEt 6, Zapisovalnik podatkov o temperaturi, Zapisovalnik podatkov, Zapisovalnik

Reference

Pustite komentar

Vaš elektronski naslov ne bo objavljen. Obvezna polja so označena *