Philips SRP5016/10 6-in-1 Universal Remote Control User Manual

1. Izdelek je končanview

The Philips SRP5016/10 is a modern and elegant 6-in-1 universal remote control designed to simplify your home entertainment experience. It allows you to control up to six different devices, such as televisions, DTVs, DVRs, home theater systems, soundbars, and streaming devices. This remote features a learning function, enabling it to receive and store infrared codes from your original remote controls, providing comprehensive control over various brands and models.

Image 1.1: Philips SRP5016/10 6-in-1 Universal Remote Control. This image displays the front view of the black universal remote control, highlighting its ergonomic design and button layout.

2. Nastavitev

2.1. Namestitev baterije

1. Odprite pokrov predalčka za baterije, ki se nahaja na zadnji strani daljinskega upravljalnika.
2. Vstavite dve bateriji AAA in pri tem pazite na pravilno polarnost (+ in -), kot je označeno v notranjosti predala.
3. Trdno zaprite pokrov prostora za baterije.

Opomba: Baterije niso priložene in jih je treba kupiti posebej.

2.2. Programming Devices

The Philips SRP5016/10 can be programmed using either direct code entry or the learning function.

2.2.1. Direct Code Entry (Recommended for common brands)

1. Vklopite napravo, ki jo želite upravljati (npr. televizor, DVD predvajalnik).
2. Press and hold the desired device button on the universal remote (e.g., TV, DVD) for approximately 3 seconds until the device button lights up.
3. Enter the 4-digit code for your device's brand (refer to the code list provided with your remote, if available, or search online for Philips universal remote codes).
4. If the device turns off or responds, the code is correct. Press the device button again to save the code. If not, try the next code for your brand.

2.2.2. Learning Function (For devices not in the code list or advanced functions)

1. Place the universal remote and your original remote control head-to-head, approximately 1-3 cm apart.
2. Press and hold the desired device button on the universal remote (e.g., TV) for approximately 3 seconds until the device button lights up.
3. Pritisnite in držite NAUČITE SE button on the universal remote until the device button starts blinking.
4. On your original remote, press the button you wish to teach (e.g., MOČ). The device button on the universal remote will blink rapidly and then stay solid, indicating successful learning.
5. Repeat step 4 for all other buttons you wish to learn.
6. Pritisnite NAUČITE SE button again to exit learning mode.

3. Navodila za uporabo

3.1. Izbira naprave

To control a specific device, press the corresponding device button (e.g., TV, DVD, SOB, POMOŽ, ZVOČNA PLOŠČA, PRETOK) once. The selected device button will light up briefly to confirm your selection. You can then use the remote's buttons to control that device.

3.2. Osnovne funkcije

• MOČ: Vklopi ali izklopi izbrano napravo.
• GLASNOST +/-: Prilagodi glasnost izbrane zvočne naprave.
• KANAL +/-: Changes channels on the selected TV or DTV device.
• MUTE: Utiša zvok.
• ŠTEVILNI GUMBI (0-9): Za neposreden vnos kanalov ali druge numerične vnose.
• NAVIGATION (Arrow buttons, OK): Za navigacijo in izbiro po menijih.

4. Vzdrževanje

4.1. Zamenjava baterije

When the remote control's range decreases or buttons become unresponsive, it is time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace both AAA batteries simultaneously with new ones.

4.2. Čiščenje

Za čiščenje daljinskega upravljalnika uporabite mehko, suho krpo. Za trdovratno umazanijo rahloampen the cloth with water or a mild cleaning solution. Avoid using abrasive cleaners, solvents, or alcohol, as these can damage the remote's surface or internal components.

5. Odpravljanje težav

• Daljinski upravljalnik ne deluje:
  • Preverite, ali so baterije pravilno vstavljene in ali niso izpraznjene. Po potrebi jih zamenjajte.
  • Prepričajte se, da med daljinskim upravljalnikom in napravo ni ovir.
  • Verify that the correct device button (e.g., TV, DVD) is selected.
• Naprava se ne odziva na ukaze:
  • The device code may be incorrect. Try reprogramming the device using a different code from the code list or use the learning function.
  • Ensure the remote's infrared emitter is pointed directly at the device's infrared receiver.
• Funkcija učenja ne deluje:
  • Prepričajte se, da so baterije originalnega daljinskega upravljalnika sveže in da daljinski upravljalnik deluje pravilno.
  • Make sure the remotes are positioned correctly (head-to-head, 1-3 cm apart) during the learning process.
  • Try learning the button again. Some original remotes have weaker IR signals that require multiple attempts.

6. Specifikacije

7. Garancija in podpora

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Philips offers customer support for their products. If you encounter issues that cannot be resolved using this manual, please visit the official Philips support webali se za pomoč obrnite na njihovo službo za pomoč uporabnikom.

Za garancijske zahtevke shranite dokazilo o nakupu.