SkyCentrics SkyBox MA01-WBNA EcoPort to Modbus Adaptor Installation Guide
SkyCentrics SkyBox MA01-WBNA EcoPort to Modbus Adaptor Installation Guide

Getting to know SkyBox

Your new SkyBox allows your commercial equipment to communicate to the grid to shift the time of use of your device to benefit the grid, reduce your costs, and maintain your comfort.
MA01-WBNA

SkyBox

RESET: A button which can be pressed to factory reset the SkyBox. See Table 1 for more information.
QR SYMBOL: The QR symbol has information that may be scanned.
SN: Serial Number
Please copy the Serial number below for your records.

SN:__________________
YOUR DEVICE:

Review the requirements

To get started, you will need:

  • Your SkyBox
  • Your equipment that has modbus or bacnet communications

Read and follow all of the instructions, cautions, and warnings in this manual.

Install the SkyBox

  1. Plug the equipment modbus or bacnet communications into the ethernet RJ-45 port .
  2. Plug power into the SkyBox.
    Installation

Connect to your LTE network

Your SkyBox only needs to be plugged in to connect automatically to the grid.

5.Participation in your Utility Energy Management Program

The SkyBox enables your commercial equipment to be informed of power grid conditions and to respond intelligently when successfully connected to the grid.
Your utility’s energy management program may collectively optimize power use when necessary to support the power grid. The result is a more efficient and reliable system. This also helps maintain lower electricity rates.

Table 1 — Reset button

Function Action Description
System Reset Hold button down for 3secondsandrelease Resets Sky Box configuration to the default settings.
Factory Reset Hold button down for 7secondsuntil LED goes off, then release Restores the Sky Box  to factory settings.
Table 2 — LED Status Indicator
Color Pattern Description
Off Sky Box is not receiving power.
hitWe Solid Sky Box is powered and connected to a local network.
Blinking Sky Box trying to connect to a local network.

Table 3 — LED Status Indicator

Color Pattern Description
Off SkyBox is not receiving power.
Blue Solid SkyBox ispowered and connected to the LTE network.
Blinking SkyBox trying to connect to the LTE network.

SkyCentrics Logo

Documents / Resources

SkyCentrics SkyBox MA01-WBNA EcoPort to Modbus Adaptor [pdf] Installation Guide
MA01, 2ABDK-MA01, 2ABDKMA01, SkyBox MA01-WBNA EcoPort to Modbus Adaptor, SkyBox MA01-WBNA, MA01-WBNA, MA01-WBNA EcoPort to Modbus Adaptor, EcoPort to Modbus Adaptor, EcoPort Adaptor, Modbus Adaptor, Adaptor

References

Leave a comment

Your email address will not be published. Required fields are marked *