SKS KLEPS 2 Clamp Type Test Probe
Product Information
Specifications:
- Product: KLEPS 2 Clamp-type Test Probe
- Connection: Solder connection
- Rated Voltage Measurement Cat.: 30 VAC / 60 VDC O (2)
- Rated Current: 6 A
- Housing Material: PA
- Inflammability Class: V-2 (UL 94)
- Clamp Type: Contact hook, gold plated
- Clamping Range: Up to 2 mm
Product Usage Instructions
1. Preparation:
Ensure the actuator button is removed before soldering. Identify the cable to be connected.
2. Soldering:
Solder the cable to the solder connection point on the miniature clamp-type test probe.
3. Cable Connection:
Once soldered, connect the cable to the probe. Press the actuator button back on until it engages securely.
FAQs
- Q: What is the maximum diameter of wires that can be used with KLEPS 2?
- A: KLEPS 2 is designed for wires up to a maximum diameter of 2 mm.
- Q: What is the rated voltage and current for KLEPS 2?
- A: The rated voltage measurement category according to IEC 61010 is 30 VAC / 60 VDC O (2), and the rated current is 6 A.
Product
description
- KLEPS 2
- Miniature clamp-type test probe with solder connection. Gold-plated sprung bronze contact hook for wires up to a maximum diameter of 2 mm. Remove actuator button for soldering, when cable is connected, press back on until it engages.
operating instruction
BA202
- article-no. / *colour
- 9314671xx
- 9314671xx
drawing
technical data
| connection | solder connection |
| rated voltage | 30 VAC / 60 VDC |
| measurement cat. acc. to IEC 61010 | O (2) |
| rated current
(consider derating curve) |
6 A |
| housing material | PA |
| temperature range acc. To IEC61010(1) | -25 °C to +70 °C |
| inflammability class acc. to UL 94
(only valid for basic material of housing) |
V-2 |
| clamp type | contact hook, gold-plated |
| clamping range | max. Ø 2 mm |
MORE INFO
- contact the manufacturer for applications at deviating temperature ranges
- without rated measurement category, for other circuits that are not directly connected to mains
- stand: 21.06.2022
- stand: 21.06.2022
- Downloaded from Arrow.com.
CONTACT INFORMATION
- SKS Kontakttechnik GmbH
- Neue Schichtstraße 14
- D-09366 Niederdorf
- Phone +49-37296-930-300
- Fax +49 37296-930-301
- www.sks-kontakt.de
- info@sks-kontakt.de
Documents / Resources
 |
SKS KLEPS 2 Clamp Type Test Probe [pdf] Owner's Manual BA202, 9314671xx, KLEPS 2 Clamp Type Test Probe, KLEPS 2, Clamp Type Test Probe, Type Test Probe, Test Probe, Probe |