Air Unit HDMI Input to Ethernet Output Converter
“
Product Information
Specifications
- Product Name: Ethernet to HDMI Converter
- Manufacturer: SIYI Technology (Shenzhen) Co., Ltd.
- Website: SIYI.biz/en
- Supports collaborative control with SIYI optical pods and
gimbal cameras - Real-time tracking and capture of targets with focus and zoom
control - Supports anti-lost function for continuous tracking
- Mavlink OSD Information Overlay for telemetry data display on
HDMI output - Real-time recording in MP4 format to TF/SD card
Product Usage Instructions
Typical Connection Diagram
Refer to the user manual for detailed connection diagrams.
Connection Steps:
- Connect SIYI optical pod or gimbal camera to the Ethernet to
HDMI Converter. - Connect the HDMI output of the converter to your display
device. - Power on all devices and follow the tracking setup instructions
provided.
Recording Instructions:
- Insert a TF/SD card into the converter for video
recording. - Start recording by following the on-screen instructions or
using the remote control. - Stop recording when done and access the recorded videos for
playback or backup.
FAQ
Q: How do I update the firmware of the Ethernet to HDMI
Converter?
A: Firmware updates can be downloaded from the official SIYI
website. Follow the provided instructions for updating.
Q: Can I use this converter with any HDMI device?
A: The converter is designed to work specifically with SIYI
optical pods and gimbal cameras. Compatibility with other HDMI
devices may vary.
“`
ETHERNET TO HDMI CONVERTER
USER MANUAL
SIYI Technology (Shenzhen) Co., Ltd. SIYI.biz/en
Thank you for purchasing SIYI’s product.
SIYI AI tracking module supports collaborative control with SIYI optical pods and gimbal cameras to achieve real-time tracking and capture of targets and can highlight the tracking target in the picture through real-time focus and zoom. It supports the anti-lost function. During the tracking process, if the target is blocked or briefly leaves the monitoring screen, AI tracking module can automatically recognize and continue tracking when it re-enters the monitoring screen.
To ensure you a good experience of the product, please read this manual carefully. If you encounter any issue using the product, please consult the manual or check the online pages of this product on SIYI official website (https://siyi.biz/en). You can also write an email to SIYI official A/S center (support@siyi.biz).
2024 SIYI Technology Copyright
1 / 24
Contact Us: SIYI Official Website (https://SIYI.biz/en) SIYI User Group Facebook
Facebook
Linkedln
YouTube
2024 SIYI Technology Copyright
2 / 24
User Manual Update Log
Version
Date
Updates
1.0
2023.11 Original version.
2024 SIYI Technology Copyright
3 / 24
CONTENT
READ TIPS ……………………………………………………………………………………………………………………………………………… 5 Icons ……………………………………………………………………………………………………………………………………………………..5 Safety …………………………………………………………………………………………………………………………………………………… 5 Storage / Carrying / Recycling ………………………………………………………………………………………………………………….6
1 INTRODUCTION ………………………………………………………………………………………………………………………………….. 7 1.1 Product Features ………………………………………………………………………………………………………………………………..7 1.2 Interface & Pinouts …………………………………………………………………………………………………………………………… 8 1.3 Technical Specification ………………………………………………………………………………………………………………………9 1.4 Packing List …………………………………………………………………………………………………………………………………… 10 1.5 Indicator Definition ………………………………………………………………………………………………………………………….11
2 TYPICAL CONNECTION DIAGRAM ……………………………………………………………………………………………………12 2.1 SIYI Optical Pod Outputs HDMI Video through Ethernet to HDMI Converter ………………………………………. 12 2.2 HM30 Ground Unit Outputs HDMI Video through Ethernet to HDMI Converter …………………………………… 13
3 HOW TO CONFIGURE THE MODULE …………………………………………………………………………………………………14 3.1 IP Addresses ……………………………………………………………………………………………………………………………………15 3.1.1 Check IP Addresses ………………………………………………………………………………………………………………….. 15 3.1.2 Change IP Addresses ………………………………………………………………………………………………………………… 15 3.2 Configuration …………………………………………………………………………………………………………………………………. 17 3.2.1 Check Converter Configuration ………………………………………………………………………………………………….. 17 3.2.2 Make Converter Configuration …………………………………………………………………………………………………… 18 3.3 Firmware Upgrade ………………………………………………………………………………………………………………………….. 19 3.3.1 Check Firmware Version …………………………………………………………………………………………………………… 19 3.3.2 Firmware Upgrade Steps …………………………………………………………………………………………………………….19 3.4 Common IP Addresses ……………………………………………………………………………………………………………………..20 3.5 Main Firmware Update Log ………………………………………………………………………………………………………………22
4 After-sale Service …………………………………………………………………………………………………………………………………..23
2024 SIYI Technology Copyright
4 / 24
READ TIPS
Icons
Please pay more attention to content indicated with the following marks:
DANGER Dangerous manipulation probably leads to human injuries. WARNING Warnings on manipulation possibly leads to human injuries. CAUTION Cautions on what manipulation may lead to property loss.
Prohibited
Mandatory
Mark
Safety
SIYI ethernet to HDMI converter is designed for professional application in specific scenes, users who approach to the equipment should have the basic knowledge of how to operate it. Irregular or irresponsible manipulations to the device may cause damage, property loss, or human injuries, and SIYI Technology is not obliged to any of the damage, loss, or injury. It is prohibited to use SIYI products for military purpose. Users under 14 years’ old should follow an experienced trainer’s guide. Disassembling or modification to the system is prohibited without permission from its manufacturer, SIYI Technology.
2024 SIYI Technology Copyright
5 / 24
Storage / Carrying / Recycling
When your SIYI product is left unused, or you are bringing it outdoors, or the product life has expired, please do read the below precautions.
DANGER
Always place your SIYI products at places where babies or kids do not reach. SIYI products should be placed in places which are too hot (above 60) or too cold (under -20).
CAUTION
SIYI products should not be placed in places under direct sunshine or too dusty or too wet. Carrying or transporting SIYI products should avoid vibration or shatter by which components may break.
2024 SIYI Technology Copyright
6 / 24
1 INTRODUCTION
1.1 Product Features
Mavlink OSD Information Overlay Mavlink telemetry information from SIYI links can be overlay to HDMI video output as On-Screen-Display (OSD) through the Ethernet to HDMI output converter. FPV OSD coming with full HD images is very enjoyable.
Real-Time Recording in MP4 Format The converter can record video streams to TF / SD card in MP4 format. Very easy to replay flight videos and make backup.
Abundant Configuration Through TF / SD card the converter can also be configured for customizing IP addresses, modifying video stream RTSP addresses, enable / disable OSD, etc. Tiny module, powerful feature!
2024 SIYI Technology Copyright
7 / 24
1.2 Interface & Pinouts
2024 SIYI Technology Copyright
8 / 24
1.3 Technical Specification
Video Input Port
Video Output Port
Working Voltage
Power Consumption Video Recording Resolution
Video Recording Bitrate
Supported File System
Video Recording Format Supported TF / SD Card
Type Product Dimensions
Product Weight Working Temperature
Ethernet
Micro-HDMI
8.4 ~ 25.2 V Average: 1.5 W
Summit: 5 W 1080p (1920*1080) @ 30 fps
720p (1280*720) @ 30 fps 12 Mbps FAT32 ExFAT MP4
Micro-SD Class10, max 128 GB
42 x 37 x 13 mm
25 g
-10 ~ 50
Mark Please format the SD card to FAT32 before firmware upgrade.
2024 SIYI Technology Copyright
9 / 24
1.4 Packing List
1 x SIYI Ethernet to HDMI Converter
1 x HM30 Ground Unit to Ethernet-HDMI Converter 2 in 1 Connection & Power Cable (Connect HM30 ground unit’s LAN port to the converter’s Ethernet port and powers the converter separately)
1 x Micro-HDMI to Standard HDMI Cable (Connect the converter to HDMI monitor)
1 x SIYI Optical Pod to Ethernet-HDMI Converter 2 in 1 Connection & Power Cable (Connect SIYI optical pod’s Ethernet port to the converter’s Ethernet port and powers the converter separately)
2024 SIYI Technology Copyright
10 / 24
1.5 Indicator Definition
Red-Green-Yellow Slow Blinks: Converter is starting. Slow Green Blinks: Converter receives video stream. Slow Yellow Blinks: Converter is not receiving video stream.
2024 SIYI Technology Copyright
11 / 24
2 TYPICAL CONNECTION DIAGRAM
2.1 SIYI Optical Pod Outputs HDMI Video through Ethernet to HDMI Converter
2024 SIYI Technology Copyright
12 / 24
2.2 HM30 Ground Unit Outputs HDMI Video through Ethernet to HDMI Converter
2024 SIYI Technology Copyright
13 / 24
3 HOW TO CONFIGURE THE MODULE
SIYI Ethernet to HDMI converter can be configured through SD card, so does firmware upgrade.
Mark It is suggested to format the SD card to FAT32 before firmware upgrade. It is suggested to insert the SD card to the converter and run it for a while, then you will see the files related to module configuration.
The two “.txt” files in the root category of the SD card are for checking and changing module configuration.
“curip.txt” for checking the current IP addresses. “setip.txt” for customers to change IP addresses.
2024 SIYI Technology Copyright
14 / 24
3.1 IP Addresses
3.1.1 Check IP Addresses Open the “curip.txt” file, you will see the current IP addresses and gateway of the AI tracking module.
“192.168.144.50” is the factory default module IP addresses. “192.168.144.12” is the factory default module gateway.
3.1.2 Change IP Addresses Open the “setip.txt” file, input the IP addresses you need after “IP = “.
2024 SIYI Technology Copyright
15 / 24
Then insert the SD card to the module and power it. After three to five minutes, the new IP addresses will be flashed into module. Then we restart the module to finish changing IP addresses.
Mark When you are using the converter with SIYI gimbals and SIYI links, please do configure its IP addresses within “192.168.144.X” and avoid conflicting with their existing IP addresses. Please refer to the “Common IP Addresses” chapter in this manual for detail.
2024 SIYI Technology Copyright
16 / 24
3.2 Configuration
3.2.1 Check Converter Configuration Open the “curip.txt” file, you will see the current configuration of the converter.
ProtocolType = 1 indicates the current streaming type (0 = SIYI protocol, 1 = RTSP stream)
RtspAddress = rtsp://192.168.144.25:8554/main.264 indicates the current steam source’s RTSP addresses
SiyiAddress = 192.168.144.25 indicates the current stream source’s SIYI protocol IP addresses
SiyiPort = 37256 indicates the current stream source’s SIYI client port number OsdShow = 1 indicates current OSD displaying status (0 = OFF, 1 = ON)
2024 SIYI Technology Copyright
17 / 24
3.2.2 Make Converter Configuration Open the “setip.txt” file, input your required parameters after relevant configurations.
Mark Configuring the converter does not require restarting it. When the converter is working, parameters will be automatically flashed in after inserting Micro-SD card.
2024 SIYI Technology Copyright
18 / 24
3.3 Firmware Upgrade
3.3.1 Check Firmware Version Open the “curip.txt” file, you will see the current firmware version of the AI tracking module.
3.3.2 Firmware Upgrade Steps
Before upgrading, it is necessary to prepare the tools, software, and firmware below.
SD / TF card
Mark Customers should prepare the above tools.
SIYI Ethernet to HDMI Converter Firmware
2024 SIYI Technology Copyright
19 / 24
Mark Above tools can be downloaded from the “Downloads” page on SIYI official website (https://siyi.biz/en).
Steps 1. Save the module firmware’s “.bin” file to the SD / TF card’s root directory and do
not change the file name.
2. Insert the SD card with saved firmware to the converter and power it. 3. Wait for three to five minutes, camera firmware will be flashed automatically and
disappear from the SD card. 4. Restart the module to make the configuration work.
3.4 Common IP Addresses
SIYI Air Unit IP Address: 192.168.144.11
2024 SIYI Technology Copyright
20 / 24
SIYI Ground Unit IP Address: 192.168.144.12 SIYI Handheld Ground Station Android System IP Address: 192.168.144.20
SIYI Ethernet to HDMI Output Converter IP Add: 192.168.144.50 SIYI AI Camera IP Address: 192.168.144.60 SIYI Optical Pod / Gimbal Camera’s Default IP Addresses: 192.168.144.25 (NEW) SIYI Optical Pod / Gimbal Camera’s Default RTSP Addresses: SIYI AI Camera: rtsp://192.168.144.25:8554/video0 Main Stream: rtsp://192.168.144.25:8554/video1 Sub Stream: rtsp://192.168.144.25:8554/video2 (NEW) SIYI FPV App’s Private Video Stream Protocol’s Addresses: SIYI Camera 1 Main Stream: 192.168.144.25: 37256 SIYI Camera 1 Sub Stream: 192.168.144.25: 37255 SIYI Camera 2 Main Stream: 192.168.144.26: 37256 SIYI Camera 2 Sub Stream: 192.168.144.26: 37255
SIYI IP67 Camera A’s IP Address: 192.168.144.25 SIYI IP67 Camera B’s IP Address: 192.168.144.26 SIYI Air Unit HDMI Input Converter’s IP Address: 192.168.144.25 SIYI IP67 Camera A’s RTSP Address: rtsp://192.168.144.25:8554/main.264 SIYI IP67 Camera B’s RTSP Address: rtsp://192.168.144.26:8554/main.264 SIYI Air Unit HDMI Input Converter’s RTSP Address:
2024 SIYI Technology Copyright
21 / 24
rtsp://192.168.144.25:8554/main.264
Common Video Player: SIYI FPV, QGroundControl, EasyPlayer Network Diagnosis Tool: Ping Tools
Mark SIYI cameras released after ZT30 (including ZT30 and ZT6) start to use the new addresses. SIYI cameras released before ZT30 (including ZR30, A2 mini, A8 mini, ZR10, and R1M) are stilling using the old addresses.
3.5 Main Firmware Update Log
Date Version Updates
Date Version Updates
2023-10-11 0.1.11
New: OSD information changed to English only.
Improve: Latency.
2023-07-18 0.1.9
2024 SIYI Technology Copyright
22 / 24
4 After-sale Service
Please visit the SIYI Technology support page at Service and Support – SIYI Technology | Empowering and Building an Intelligent Robot Ecology for the latest after-sales and warranty information.
2024 SIYI Technology Copyright
23 / 24
Documents / Resources
 |
SIYI Air Unit HDMI Input to Ethernet Output Converter [pdf] User Manual Air Unit HDMI Input to Ethernet Output Converter, HDMI Input to Ethernet Output Converter, Ethernet Output Converter, Output Converter, Converter |