Signature Hardware 955098 Round LED Mirror
Product Specifications
- Brand: O PA LO
- SKU: 955098
- Model: SH662055LED, SH662056LED
Product Usage Instructions
Before You Begin
We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, countertop,or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@signaturehardware.com.
Getting Started
Ensure that you have gathered all the required materials that are needed for the installation.
Installation Steps
- Identify your mounting location.
- Measure the location of each screw hole on the wall and mark using a level.
- Drill pilot holes for each screw.
- If installing on solid material, insert the screw anchors into each pilot hole.
- Tighten each screw by hand using a screwdriver.
- Confirm the power is shut off to the circuit.
- Install the wiring as shown in the provided diagram.
- Hang the mirror, shaking it lightly onto the hanging bar to ensure stability.
Frequently Asked Questions
Additional Questions?
Still need help? Check out our Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing support@signaturehardware.com.
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing plumbing ?xtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personal injury during installation.
Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehard-ware.com or by emailing support@signaturehard-ware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.
TOOLS AND MATERIALS:
INSTALLATION
- Identify your mounting location.
- Measure the location of each screw hole on the wall and mark using a level.
- Drill pilot holes for each screw.
- If installing on a solid material, insert the screw anchors into each pilot hole.
- Tighten each screw by hand using a screwdriver.
- Be sure to confirm the power is shut off to the circuit.
POWER OFF
- Install the wiring as shown in the diagram below.
- Hang the mirror, shaking it lightly onto the hanging bar to ensure it is stable
- Turn on the power.
1.855.715.1800
signaturehardware.com
Documents / Resources
 |
Signature Hardware 955098 Round LED Mirror [pdf] Installation Guide 9354913_14026788, 955098, 955098 Round LED Mirror, 955098, Round LED Mirror, LED Mirror, Mirror |