SIEMENS BT300-KEYPAD Door Keypad Mounting Kit
Door Keypad Mounting Kit – Mounting Instructions
Introduction
The Door Keypad is used for the same purpose as the standard control keypad. It is installed on the door of a switchgear cabinet.
For the installation, you need the following parts (see picture below):
- Screws (4 pcs)
- Data cable with attached grounding cable
- Panel adapter kit (packaged). See manual in package for components.
- Door keypad base
Make sure that you have received all necessary parts!
Mounting procedure
APPENDIX
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improve-ments are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2013 Siemens Industry, Inc.
Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 USA
1-847-215-1000
Your feedback is important to us. If you have comments about this document, please send them to sbt_technical.editor.us.sbt@siemens.com.
Documents / Resources
 |
SIEMENS BT300-KEYPAD Door Keypad Mounting Kit [pdf] Instruction Manual BT300-KEYPAD Door Keypad Mounting Kit, BT300-KEYPAD, Door Keypad Mounting Kit, Keypad Mounting Kit, Mounting Kit, Kit |
