Shuntonglai 2BME5D8 Handheld Translation Device Instruction Manual

Power on/off:
Long press the power button for more than 2 seconds, the screen will light up to the translation interface, and you can use it normally. Long press the power button for more than 2 seconds, the screen will pop up restart/shut- down, select the shutdown icon, and the device will shut down.

Restart:
Press and hold the power button for more than 2 seconds. The restart/shut- down icon is displayed on the screen. Select the restart icon to restart the device.

Back key:
Press the Return key to return to the previous function.

Volume:
To adjust the volume, click the side + button to increase the volume; Click the Side-button to reduce the volume to the lowest or mute mode.

Voice key:
Press and hold the voice input key on the host (the left voice key corresponds to the language on the left of the home page, and the right voice key corresponds to the language on the right of the home page) to enter the voice recognition state. After releasing the hand, the voice is automatically recognized and analyzed, and automatically translated into the target language and played (the voice playback mode depends on the setting).

TF card:
Can be expanded storage, support FAT32 format memory card, up to 128G memory card.

tpcy-c interface:
tpcy-c interface function: charging, data transmission, audio and video signal transmission

Reset key:
If your device has a serious malfunction or crashes, you can find a small hole on the side of the device. Use a fine needle or electronic reset tool to insert it into the hole and press the reset button to reset the hardware.

Online translation

Connect to Wifi, select online translation, and long press the mother tongue translation key or foreign language translation key to realize mutual translation between 138 countries, as shown in the figure below:

Warm reminder:

1. This function needs to be used in a network environment
2. Click the translation text on the display screen to play the language repeatedly
3. The native language input key corresponds to the translation language on the left, and the foreign language input key corresponds to the right language
4. The clearer the voice input is, the more accurate the recognition is. The maximum input time is 1 minute

Offline translation

Offline translation module can be used without network environment, offline translation languages are available in 17, as shown below:

Warm reminder:
This function can be used without a network

Photo translation

Click the photo translation icon, select the target language to be translated, point the window of the screen at the content to be translated, click the photo function and wait 2-3 seconds for the content to be translated. (Model with this feature: S85)

Photo translation is available in 74 languages online. Click on the white or blue speaker to broadcast the language.

Warm reminder

1. This function can be used in an environment with or without a network
2. The clearer the photo, the more accurate the translation
3. Click the picture in the lower left corner to delete the picture

Phone translation

Open Chrome, PayPal, we chat and other software on the mobile phone, scan the mobile translation OR code on the translator, and you can perform mobile translation.

Group translation

Other users of the same Al translator can be invited to build a multi-ma- chine group to achieve cross-regional and cross-language communication,

Online in 138 languages, 117 people can communicate in the same group at the same time.

Enter translation

Select the language you want to translate and enter the translated content in the text box to translate it. Click the horn icon to play the translated content repeatedly.

Smart recording

Select the language you want to record, and translate into 13 source languages and 138 online languages. Click the record icon or the left and Tight voice buttons to record the translation.

Warm reminder:

1. This function can be used in an environment with or without a network
2. Click the icon in the upper right corner of the display and select the recorded question to see the translated content
3. The clearer the voice input, the more accurate the recognition.

Simultaneous interpretation

Select the language you want to translates, click the sound recording key to enter continuous sound recording mode, and click the sound recording key again to translate the recorded content.

Language learning

Select the language you want 1o translate, press and hold the Voice recording key t record the voice, and click the icon on the right side of the screen to enter the follow-up mode.

Chat GPT

Click the + icon in the lower right corner of the screen to create a dialogue, hold down the sound recording key to enter the content, release the key and wait for 2 seconds, the Al voice assistant will reply to your input content.

Music Play

Support local music and TF card music play.

Exchange rate conversion

Select the type of currency to b converted, enter the number to be converted, and click the conversion icon in the upper right corner to convert the currency.

Multimedia

Includes world clock, music, video recording and other functions.

Battery charging and other operations

When charging with a charger: Use the USB cable in the accessory for charging.
The charging time is different when charging with a connector or when charging with a computer.

Network link

Warm reminder:
Some applications need to be connected to the network.
Setting method:
Click T on the main interface to set J, start the WiFi function, find the WiFi network to be connected and enter the password to connect. After the connection is successful, the WiFi icon will be displayed in the status bar, and you can use it freely.

Equipment upgrade

The device will be updated from time to time. If your device cannot be updated, the possible reasons are as follows:
a. The current version is the latest version and there is no new upgrade package.
b. Check whether the network connection is normal. Only when the network connection is normal Receive an upgrade notification;
c. Sufficient power is required before the version update. Do not perform any operation during the system installation to prevent system installation interruption and upgrade failure.

RF/SAR information

Wireless communication equipment models may have different SAR levels, and to ensure the safety and health of users, this equipment is designed and manufactured in accordance with radio exposure guidelines. The limit for specific radio wave absorption applicable to the general public is 2.0 watts /kg (W/kg) per 10 grams of body tissue on average.
After testing, the equipment meets the limitation.

Safety precautions

1. Please do not use this product in high temperature or high humidity environment.
2. This product contains electronic components. Please pay attention to waterproof and moisture-proof during use and storage. Do not use the product in water or damp environment.
3. Gently insert or remove the charging cable to prevent the connector from being damaged.
4. Please do not dismantle or repair the product without authorization, otherwise you cannot enjoy the warranty service.
5. The packaging box and instructions of this product contain important information, please keep them for future use.

Non-warranty clause

1. Three packages have expired.
2. Damage caused by force majeure.
3. Performance failure caused by human damage.
4. Unauthorized maintenance/misuse/collision/negligence/abuse/fluid intake/accident/alteration/incorrect use, or tearing/altering of the label.

Hazardous substances declaration for electronic information products

Part name	Poisonous or harmful substance or element
	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent Chromium (Cr(VI) )	Polybrominated biphenyls (PBB)	Polybrominated ( PBDE )
Plastic case	0	0	0	0	0	0
Internal cable	0	0	0	0	0	0
Circuit board	X	0	0	0	0	0
Data cable	X	0	0	0	0	0

This form is prepared in accordance with SJ/T 11364.
O: The content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T26572.
X: indicates that the content of the toxic or hazardous substance in at least one homogeneous material of the part exceeds the limit requirements of GB/T 26572.
Note: The parts marked “X” in the table cannot be replaced by harmful substances due to the limitation of global technological development level, and meet the environmental protection requirements of the EU RoHs Directive.

The number in this label indicates that the environmental protection use limit of the product under normal use is 10 years, and some parts are also marked with the environmental protection life, and the environmental protection life is subject to the number in the label.

Product commitment

This product complies with the requirements of the national Measures for the Management of Pollution Control of Electronic Information Products (including the Requirements for the limit of toxic and harmful Substances in Electronic Information Products and the Requirements for the Identification of Pollution Control of Electronic Information Products). The environmental protection period marked on the product will not leak or change under normal use within the corresponding period, and the use of the electronic information product by the user will not cause serious pollution to the environment or serious damage to his personal life and property.

Note: This product does not have a power adapter when shipped. If consumers use a power adapter for power supply, they should purchase a power adapter that has obtained CCC certification and meets the standard requirements. Batteries must not be exposed to conditions such as sunlight, fire, or similar overheating.

Attention:

1. Discarding the product will have an impact on the environment. Please recycle properly.

Warranty card/Certificate of qualification

Dear customer, thank you for buying our products. In order to better serve you, after purchasing the product, please read carefully and take good care of this warranty card.

name:….
telephone:….
Contact address:….
SN number:…….
Fault description:….
Purchase channel:…
Order number:……

If you need after-sales service, please contact after-sales channel customer service in time.
Please fill out this card in detail and return it with the product.

FCC Caution:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents / Resources

Shuntonglai 2BME5D8 Handheld Translation Device [pdf] Instruction Manual 2BME5D8, 2BME5D8 Handheld Translation Device, Handheld Translation Device, Translation Device, Device

References

• User Manual