SHENZHEN R Series Remote Control Ring
Specifications
- Model: R1
- Frequency (Hz): 20-20 kHz
- Communication distance: 10 meters
- Charging case battery capacity: 250 mAh
- Ring remote control battery capacity: 40 mAh
- Charging time: about 1.5 hours
- Charging interface: Type-C
Product Usage Instructions
Buttons Function Introduction
The device has multiple buttons with various functions. Here is a breakdown of the button operations:
Guides for Set-up
- iOS devices setup:
- Pairing and operating the device:
Using on Camera/Video
The device can be used for camera and video operations. Here are the steps to follow:
Using on TikTok or other video playback software
For specific applications like TikTok, the device has tailored functions. Follow these steps:
How to switch the video to a horizontal screen?
Using on E-book
If you intend to use the device with an E-book, follow these steps:
PMN: Ring remote control
Model/HVIN：R1, R2, R3
After-sales email：TKservice001@outlook.com
Packing list
Buttons function introduction
| NO. | Buttons | Function | Operation | Notes |
| 1 | Power on | Take out the automatic start-up | Power off state | |
|
2 |
Power off | Return to auto shut down | Power on state | |
| Auto Power Off | Power on and unconnected state, automatically power
off after 3 mins |
Not connected state | ||
| 3 |  |
Up/Flip up | Single click | |
| 4 |  |
Down/Flip down | Single click | |
| 5 |  |
Left/Flip left | Single click | |
| 6 |  |
Right/Flip right | Single click | |
| 7 |  |
Confirmation |
Single click |
| 8 | |
Single like | Double click | |
| 9 | |
Continuous likes |
Long press 3S |
|
| 10 | |
Exit continuous likes | Long press 3S | In the continuous likes state |
| 11 |  |
Take photos | Single Click | |
| 12 | |
Photo focus | Long press 3S | In the photo state |
| 13 | |
Photo focus |
Single click |
In the photo state |
| 14 | |
Volume + | Single Click | Not in the camera state |
| 15 | |
Volume – | Double click | Not in the camera state |
|
16 |
|
Disconnect currently pairing |
Press 2 buttons at the same time，red and blue lights flash alternately |
Disconnect currently connected device |
| 17 | |
Horizontal screen switch | Long press 3S | Only supports horizontal orientation on one side |
Light status introduction
Charging case
| NO. | Lighting status | Function |
| 1 | Red light is always on | Put the ring on the charging cable,
the charging case is charging |
| 2 | Light off | Fully charged |
| 3 | Red light flashes | Low battery |
| 4 | Blue light always on | Ring charging,Fully charged blue light off |
Ring
| NO. | Lighting status | Function |
| 1 | Red and blue lights flashing | Pairing status |
| 2 | Red light flashes | Low battery |
| 3 | Red light is always on | Charging in the charging case |
| 4 | Blue light flashes once | Remote control operation once |
Guides for Set-up
Step 1：iOS devices must first turn on AssistiveTouch（The iOS system version is higher than 14.8）
- Settings>Accessibility>Touch>Turn on AssistiveTouch (Android phones do not have the dots）
Step 2：The ring automatically turns on when taken out of the charging case
Step 3：Pair the Bluetooth “R1”（Lights off）
Step 4：Open the software and operate it
Using on Camera/Video
Using on TikTok（Or other video playback software）
How to switch the video to a horizontal screen?
- Turn on the screen lock of the phone
- Flip the phone to the left to landscape mode. Then long press 3S “Up” button to switch to horizontal screen operation mode
- Single click “up” button: play the previous video
- Single click “down“ button: play the next video
- Single click “OK” button: pause/play
- Flip your phone to portrait mode. Then long press 3s “Up” button to exit the horizontal screen mode
Using on E-book
Two-Step Solution Scrolling Up/Down Too Far
- Click to adjust text
- Turn off continuous scrolling
（Note：Only available for Kindle APP not for Kindle devices)
Product parameters
- Model: R1
- Frequency (Hz) : 20-20 khz
- Communication distance: 10 meters Charging case battery capacity: 250 Mah Ring remote control battery capacity: 40 Mah Charging time: about 1.5 hours
- Charging interface: Type-C
- Manufacturer：Shenzhen Zhijie Technology Co.,Ltd
- Address: B1010, Block B, Zhantao Technology Building,Xinniu Community, Minzhi Street, Longhua District,Shenzhen, China
IC： FCC ID：
FCC Warning:
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
- This device maynot cause harmful interference.
- This device must accept any interference received, including interference that maycause undesired operation
EVATOST CONSULTING LTD
- Office 101 32 Threadneedle Street, London, United Kingdom,
- EC2R 8AY1 ,EC2R 8AY1
- contact@evatost.com
SUCCESS COURIER SL
- CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3,
- Fuenlabrada, Madrid, 28947 Spain,28947
- successservice2@hotmail.com
Name SELLER HELPER INC.
- Add 1312 17th Street # 1298, Denver ,
- Zip Code 80202
- Tel 01303-7319873
Company Name: Koby Smutylo
- Contact Name: Koby Smutyl co 80202, United States
- Address: 230 Fourth Ave..Ontario KIS 2L8
FCC Warning
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC Warning
- This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FAQs
How do I charge the device?
Use the provided Type-C cable to charge the device using the charging case.
What is the communication distance of the device?
The communication distance is up to 10 meters.
Documents / Resources
 |
SHENZHEN R Series Remote Control Ring [pdf] User Manual R1, R2, R3, R Series Remote Control Ring, R Series, Remote Control Ring, Control Ring, Ring |