Shenzhen Q1 Cell Phone Holder with Wireless Speaker and Clock
Product Usage Instructions
Wireless Connection and Playback:
- Long press the POWER button to turn on the speaker.
- Use your mobile phone to search for the Wireless device named Q1 and connect to it.
- The speaker will voice prompt when the connection is successful.
- Play music from your phone through the Wireless signal.
- After 20 minutes of inactivity, Wireless will automatically disconnect.
Playing Music:
- Press once to control previous song, next song, or play/pause.
- Long press to adjust the volume.
Handling Calls and Settings:
- Press once to answer incoming calls.
- Long press to toggle ambient light (Speaker position).
- The time will synchronize automatically when connected wirelessly.
- Long press the 12H/24H button to switch between 12-hour and 24-hour modes.
Battery Charging:
When the battery is low, charge the speaker promptly to prevent automatic shutdown.
Using the Mobile Phone Holder:
Install the long arm bracket through threaded rotation to place your phone on the holder for use.
Cell phone holder with Wireless Speaker and Clock
- Before using the multi-function device, please read the instructions carefully and operate it in strict accordance with the instructions.
Product Features
- With phone stand, free your hands.
- Wireless speaker phone for conference calls.
- Led digital clock.
- Built in lithium battery, easy to carry.
What’s included
- Q1 Main Unit 1
- USB Charging Cable 1
- Stretch bracket 1
- User Manual 1
Details about Buttons
Getting Started
Please read this product manual carefully before using this product.
- Open the package, take the product out of the box, and open the mobile phone support frame.
- Long press the POWER button and the power of speaker will be turned on and the LED screen will light up simultaneously.
- Wireless connection and playback
- Long press the POWER button to turn on the speaker, then the LED screen lights up and the BT symbol on the LED screen flashes. Using the Wireless function of mobile phone to search the Wireless device of the audio and connect it(the device model is Q1). The wireless speaker will voice prompt when wireless device is connected successfully. It indicates the Wireless link is successful, Turn on the phone’s music player, and the speaker can play the phone’s music through Wireless signal.
- After connecting to the Wireless for 20 minutes without any operation, the Wireless will automatically disconnect and require a restart of the machine to reconnect.
- Playing Music
In the process of playing music, Press once
play/pause respectively. Long-press 
to decrease or increase volume. - Press once
to answer the call that comes in. - Long press
to turn on or off the ambient light (Speaker position). - Time setting
When the phone is wirelessly connected to the speaker, time will automatically synchronize to the speaker. The update time will be displayed on the LED screen. - 12H/24H setting
- Long-press the 12H/24H button to switch between the 12-hour and 24-hour modes.
- In the 12-hour mode, the LED screen will display AM or PM symbols.
- Battery charging
In use, when the battery is low, the speaker will display a beeping low voltage prompt, and the
will flash. At this time, it is necessary to charge the speaker in a timely manner, otherwise the speaker will automatically shut down. - Using of mobile phone holder
By installing the long arm bracket through threaded rotation, you can place your phone on the bracket for use.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
FAQs
Q: What should I do if the speaker displays a low-voltage prompt?
A: Charge the speaker promptly to prevent automatic shutdown.
Q: How do I adjust the volume during music playback?
A: Long press the button to decrease or increase the volume.
Documents / Resources
 |
Shenzhen Q1 Cell Phone Holder with Wireless Speaker and Clock [pdf] User Manual 2BOJB-Q1, 2BOJBQ1, Q1 Cell Phone Holder with Wireless Speaker and Clock, Q1, Cell Phone Holder with Wireless Speaker and Clock, Phone Holder with Wireless Speaker and Clock, Holder with Wireless Speaker and Clock, Wireless Speaker and Clock, Speaker and Clock, Clock |