Shenzhen A22, A23 Bluetooth Speaker
USER MANUAL
Audio manual
Thank you for choosing our products. I hope you can enjoy the music tour Safety guidance:
Please read this manual carefully before use and keep it for future reference
1. Keep away from heat source,sun exposure and sharp objects
2. Keep away from open fire
3. Do not insert any metal object to avoid short ci rcuit
4. Do not repair the product by yourself, but contact the authorized repa ir manufacturer
5. Avoid product rain and spray
6. If the product is overheated, damaged or fa lls into the liquid, please stop using it
7. Use the product according to the standard
Packaging accessories:
1.Audio* 1
2. TYPE-C charging cable * 1
3. Product manual * 1
Built in battery:
1. It takes 2-3 hours to complete the charging and discharging cycle for the fi rst use of the built-in rechargeable battery
2. Do not cont inue to charge the fu lly charged battery. Overcharging will shorten the battery life
3. If the battery is not fu lly loaded, it may lose a little
4. Product life will be shortened if the product is placed in an overheated or supercooled place
Charging function:
1. Insert the TYPE-C charging wire to charge, and insert the other end into the DC SV=lA charger
2. The LED charging indicator of the product is always on, and the red light means the audio is charged normally
3. When the product is fu lly charged, the red LED ind icator is off
Paired connection:
1. Open the Bluetooth speaker, press“ M” button to hear the beep, enter the couplet mode, open, another speaker, press m button to hear the ding-dong sound after the couplet success
2. Press the“M” key of any speaker and disconnect the couplets 3. After the speaker is turned on ,if the stereo has been paired and connected to the mobile phone or other devices
The audion will automatically connect back within the connection range
Operation function
1. On/off/play/pause
2. Mode switching
3. Light adjustment
4. Next song/volume increase
5. Previous song/volume reduction
6. USB flash disk port
7. TYPE-C charging port
8. TF card port
USING INSTRUCTION
01. Press and hold the 1 key to turn on/off. Short 1 key, play/pause
02. Short press key 2 to switch modes
03. Press 3 briefly to adjust thelight
04. Press key 4 briefly for the next song, and press key 4 for a long time to increase the volume
05. Short press 5 key to last song, long press 5 key to decrease the volume
06. Thes peaker can be charged through theTYPE-Cchargingline. The red tight is charging, and the full charge lightis off
07. When the TF card is inserted in the power on state, the audio in the TF card will be played automatically
08. when the USB flash disk is inserted in the power on state, the aud io in the USB flash disk will be played automatically
Troubleshooting
| Faultphenomenon | Possible causes | Solution | |
| Unable to search Bluetooth | The battery is not powered off | Charge the audio | |
| Unable to pair Bluetooth | The audio hasbeenpaired with another device and has not entered pairing mode |
Close other paired devices to search again and pair | |
Technical specifications
| Bluetooth version | BT5.0 | ||
| Pair Name | BTSPEAKER | ||
| Bluetooth receiving distance | Straight line accessibilitylOm | ||
| Speaker | 5205w | ||
| Battery | 3.7V/500MAH | ||
| Charging voltage | DC SV-lA | ||
| Charging duration | 3H | ||
| FM radio band | 87MHz-108MHz | ||
| Working hours | Maximum volume;;,;,3:H, minimum volume;;;:,: 6H (Note: Thetimewillv:iryd cnding ondie type,:md :,ctu:il,itu,lllioc,of die mobilephonel |
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Specifications
- Size: 132x105mm
- Compliance: FCC Part 15
- Bluetooth Connectivity
- General RF Exposure Evaluation
FAQs
Q: How can I reset the Bluetooth pairing on the speaker?
A: To reset Bluetooth pairing, press and hold the “M” button for 10 seconds until you hear a beep, then follow the pairing instructions again.
Q: What should I do if my speaker does not automatically reconnect?
A: Ensure the speaker is within the connection range and try turning off and on the Bluetooth function on your paired device.
Documents / Resources
 |
Shenzhen A22, A23 Bluetooth Speaker [pdf] User Manual 2BKPD-A22, 2BKPDA22, A22 A23 Bluetooth Speaker, A22 A23, Bluetooth Speaker, Speaker |
