Shenzhen logo

Bluetooth PCI-E WiFi Card
USER MANUAL

support wint 10, wint 11 64 bit
After the installation is complete, restart the computer.

 Hardware Installation

  1. Open the side cover of the chassis and remove the chassis tailgate screws of the PCI-E card slot.
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig1
  2. Insert the product into the corresponding card slot tightly, and either PCI-E/X1M4/X8R16 slots are available.
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig2
  3. Find the 9-pin USB interface on the motherboard, insert the external wiring of the PCI-E card Into the USB interface of the motherboard, and install the screws to secure the bracket.
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig3

How to install the PCI-E card driver?

  1. Right-click on the CD-ROM to open the driver files.
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig4
  2. Choose “WiFi driver”, click “setup”, show as below picture:
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig5
  3. Ready to install, show as below picture:
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig6
  4. Click “Next”, then choose ” I accept the terms in the license agreement”, Click ” Next ” :
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig7 Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig8
  5. Click Install °, install driver program:Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig9
  6. After installed, click ” Finish ” :
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig10

How to connect the PCI-E card to Wi-Fi?

  1. Open the Internet iconShenzhen-icon at the lower right corner of the computer.
  2. Searching and connecting the Wi-Fi you preferred on the detected Wi-Fi list.
  3. Enter the Wi-Fi password to connect.
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig11
  4. Finally, you are connected to the Wi-Fi.
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig12
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig13

How to install the Bluetooth driver?

  1. Right click on the CD-ROM to open the driver files.Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig4
  2. Choose ” bluetooth driver “, click “setup”, show as below picture:Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig17
  3. Click ” Next “, show as below picture:
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig14
  4. Choose ” I accept the terms In the license agreement “, then Click ” Next ” :
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig19
  5. Click ” Install “, install the driver program :
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig20
  6. After installed, click ” Finish ” :
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig14

How to connect the Bluetooth Earphones with the adapter?

  1. Find the Bluetooth IconShenzhen-icon1 In the lower right corner of the desktop.
  2. Right-click the mouse, select the “Add Device”, search the Bluetooth.
  3. Make sure your Bluetooth device was turned on and ready to pair.Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig21
  4. Bluetooth earphone will be detected below after a while. Double click the earphone icon to pairing.
    Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig15Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI E WiFi Card- fig16

Documents / Resources

Shenzhen Edup Electronics Technology EPEP9655 Bluetooth PCI-E WiFi Card [pdf] User Manual
EPEP9655, 2AHRD-EPEP9655, 2AHRDEPEP9655, EPEP9655 Bluetooth PCI-E WiFi Card, Bluetooth PCI-E WiFi Card

References

Leave a comment

Your email address will not be published. Required fields are marked *