Specifications
- Type: LCD Display
- Resolution: 3840 x 2160
- Aspect Ratio: 16:9
- EMI: Class B
Product Usage Instructions
- Rotation:
- If the display is to be used in portrait orientation, rotation needs to be counterclockwise.
- Ventilation Recommendations:
- Dimensions below are the minimum recommended for proper ventilation. If the distances are less than 100mm, extra ventilation may be necessary. The ventilation space should not be covered or closed off at the front of the opening.
- Installation Guidelines:
- NEC strongly recommends using size M6 screws (10-12mm + the thickness of the bracket and washers in length) for pages 3, 5, and 7; and size M8 screws (16-18mm + the thickness of the bracket and washers in length) for page 9.
- Optional Table Top Stand:
- To install or remove the optional tabletop stand for ME431, M501, and M551 models, use ST-401 or ST-43M. For ME651, use ST-65M. Only use the screws included with the optional stand. The ST-65M will need included stand holders to be attached as well.
FAQs
- Q: What should I do if my display is not rotating properly?
- A: Make sure the rotation is counterclockwise for portrait orientation. If issues persist, contact customer support for further assistance.
- Q: Can I use different screws for installation?
- A: It is strongly recommended to use the specified size M6 or M8 screws as per the guidelines provided to ensure proper installation and support for the display.
Product Description
- Type: LCD Display
- Resolution: 3840 x 2160
- Aspect Ratio: 16:9
- EMI: Class B
NOTES:
- This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by-step procedure for installation.
- Any ceilings or walls must be strong enough to support the monitor and the installation must follow any local building codes. All mounts should make secure contact with wood studs.
- Distances are in inches, for millimeters multiplied by 25.4. Distances may vary ±5%.
Rotation:
- If the display is to be used in portrait orientation, rotation needs to be counterclockwise.
Ventilation Recommendations:
Dimensions below are the minimum recommended for proper ventilation.
NOTE:
- The above are recommendations to keep your display as cool as possible. If the distances are less than 100mm, extra ventilation may be necessary. The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
Dimensions
Display Dimensions – ME431:
NEC strongly recommends using size M6 screws (10-12mm + the thickness of the bracket and washers in length).
Display Dimensions – ME501:
NEC strongly recommends using size M6 screws (10-12mm + the thickness of the bracket and washers in length).
Display Dimensions – ME551:
NEC strongly recommends using size M6 screws (10-12mm + the thickness of the bracket and washers in length).
Display Dimensions – ME651:
NEC strongly recommends using size M8 screws (16-18mm + the thickness of the bracket and washers in length).
Installing and Removing the Optional Table Top Stand
- The ME431, M501 and M551 use the ST‐401 or ST‐43M. The ME651 utilizes the ST‐65M
- Only use the screws that are included with the optional stand. The ST‐65M will need included stand holders to also be attached
- Table Top Stand Dimensions (ST‐401 pictured below):
Table Top Stand Dimensions (ST‐65M):
Note – stand holder is included when the stand is purchased but is not included in drawing below
Optional Large Wall Mount (WMK‐6598):
Optional Speaker Dimensions (SP‐RM3a):
Intel® Smart Display Module Integration:
- Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support the weight of the monitor. To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor’s screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can damage the monitor.
- Remove the SLOT COVER and the OPTION COVER. Note when using the Intel® SDM-L type option board, slide the CENTER RAIL to the right and remove it. Reverse the process to re-attach
- Gently push in the SDM-S or SDM-L module
- Attach included Option Cover after installation of SDM device.
Compute Module Integration:
- Please see separate DS1‐IF20CE installation guide for full integration. Image below may not represent actual back of unit but the concept is the same.
- Removing the OPTION COVER is necessary for installation
Final installed DS‐IF20CE with RPI CM4 below
Input Panel: Bottom
Side (Rotated)
ASCII Common Commands:
This monitor supports common ASCII control commands with many other NEC projectors. For more information on this, please see our website.
Parameter
PD Comms Tool
- Please download the PD Comms Tool and open the Communications Log by going to View → Communications Log. From here you can find any external control code necessary for your installation
- PD Comms Tool can be downloaded from here: https://www.sharpnecdisplays.us/faqs/pdcommstool/179.
Cable Connection
Communication Protocol:
- Interface: RS‐232C
- Communication System: Asynchronous
- Baud Rate: 9600 bps
- Data Length: 8 bits
- Parity: None
- Stop Bit 1 bit
- Communication Code: ASCII
- Interface: Ethernet (CSMA/CD
- Communication System: TCP/IP (Internet Protocol Suite)
- Communication Layer: Transport layer (TCP)
- IP Address: 192.168.0.10 (default out of the box)
- Port Number: 7142 (Fixed)
Browser Control:
Information and control can also be available through the HTTP browser control menu. To accomplish this, type: http://<the Monitor’s IP address>/pd_index.html Note that the LAN Power needs to be turned on for the display to be controlled while the units are off. All displays are set to the IP address 192.168.0.10 out of the box unless changed through the initial setup guide Communicating network PC needs to be on the same subnet as the display that is being communicated with
Documents / Resources
 |
SHARP Mxx1-2 Large Format Display [pdf] Installation Guide Mxx1-2, Mxx1-2 Large Format Display, Mxx1-2, Large Format Display, Format Display, Display |