Projector
A201U-B
Quick Setup Guide

About the User’s Manual

• First read the Important Information. It covers infor – mation about projector safety and cautions.
• The user’s manual (*) is posted on the web site in PDF  Portable Document Format) and provides detailed product and usage information for your projector.
  * The user’s manual is available in 17 languages.

The illustrations for this Quick Setup Guide

Quick Setup Guide

NOTE: This document explains the basic operations of the projector installed with the lens unit.

CAUTION
This projector is classified as risk group 3 of IEC/EN 62471-5:2015.
Do not enter the hazard zone. See Important Information for details.

1. Connect your computer to the projector using the HDMI cable. (Not supplied)
2. Connect the supplied power cord.
   Make sure that the prongs are fully inserted into both the AC IN terminal and the wall outlet.
   To prevent the power cord from accidently removing from the AC IN of the projector, use the power cord stopper.
3. Remove the lens cap.
4. Turn on the projector.
   WARNING
   The projector produces a strong light. When turning on the power, make sure no one within projection range is looking at the lens.
   1. Press the (POWER) button on the projector cabinet or the POWER ON (1) button on the remote control.
5. Select a source.
   1. Press the INPUT button on the cabinet for at least 1 second or the HDMI1 or HDMI2 button on the remote control.
6. Adjust an image size and position.
   CAUTION
   Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your eyes to strong light which could injure them.
   NOTE:
   Adjustment procedures are differed on lens unit. Refer to the User’s manual about detailed adjustment for each lens unit.

[LENS SHIFT]

1. Press either SHIFT/HOME POSITION button on the cabinet or SHIFT button on the remote control.
2. Press the buttons to move the projected image.

[FOCUS]

1.  Press the FOCUS button.
2. Press buttons to adjust focus.
   The focus adjustment around the optical axis and in the peripheral area are required depending on the lens unit.

[ZOOM]

1. Press either ZOOM/L-CALIB. button on the cabinet or ZOOM button on the remote control.
2. Press buttons to adjust zoom.

7 Turn off the projector.

1. Press the (POWER) button on the projector cabinet or the STANDBY button on the remote control.
2.  Press either the  (POWER) or the STANDBY button again.
3.  Mount the lens cap.
4. Disconnect all the cables.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
A201U-B Quick Setup Guide

https://www.sharp-nec-displays.com/dl/en/pj_manual/lineup.html

Ver. 1 9/24
Printed in China

Documents / Resources

SHARP A201U-B Projector Specs [pdf] User Guide A201U-B Projector Specs, A201U-B, Projector Specs, Specs

References

• User Manual