Product Usage Instructions
Safety Instructions
This device is intended to be used as a PC case fan inside a PC case or as a fan for CPU coolers or PC radiators. To ensure your \safety and the longevity of the product, please follow these safety \instructions:
- Read and understand the user manual before using the device.
- Do not operate the device if it is damaged or not functioning properly.
- Ensure proper installation according to the provided guidelines.
- Do not modify or disassemble the device.
- Keep the device away from liquids and moisture.
Connect Fan and LED
To connect the fan and LED components, follow these steps:
- Identify the 4-Pin PWM or 3-Pin Fan Connector on the device.
- Locate the Mainboard Addressable RGB-Pin Header on your motherboard labeled with +5V D ADD_HEADER.
- Connect the Fan Connector to the Mainboard Fan Header.
- Connect the LED Connector to the Mainboard RGB Header.
Direction of Airflow
Determine the direction of airflow based on your setup to optimize cooling performance. Ensure that air flows in the correct direction to cool your components effectively.
Note on Disposal
If you need to dispose of your old products, please follow local regulations for electronic waste disposal. Recycling old products helps protect the environment and human health.
Follow us on social media!
Stay connected with us on Facebook, Instagram, YouTube, and TikTok for updates and tips!
FAQ
- Q: What should I do if the fan is making unusual noise?
- A: If you notice any unusual noise coming from the fan, immediately power off your system and check for any obstructions or loose components that may be causing the noise. If the issue persists, contact customer support for further assistance.
- Q: Can I use this fan with liquid cooling systems?
- A: Yes, this fan can be used with liquid cooling systems such as PC radiators. Ensure proper installation and compatibility with your specific liquid cooling setup.
Safety Instructions
This device is to be used as a PC case fan inside a PC case or as a fan for CPU coolers or PC radiators. For your own safety, be sure to follow the instructions below before using the device. If the product is damaged due to improper use or non-compliance with the safety instructions, the manufacturer’s guarantee will be void.
CAUTION!
- Be aware of the risk of injury by touching rotating parts. Do not \insert any foreign objects between these parts, as this could damage the fan.
- Never bring the fan into contact with moisture or liquids.
- If you need to clean the fan, use a dry cloth.
- Do not use compressed air to clean the fan. This could create an electrical charge from the spinning rotor and result in damage to components.
- Only connect the fan to the designated connectors on the mainboard as shown or described in this manual. If necessary, use the operating manual of your mainboard to clearly identify the correct connectors.
Specifications
General
- Fan Speed 500 – 1,500 rpm ± 10 %
- Bearing Type Fluid Dynamic Bearing
- Max. Airflow 99.52 m³/h
- Max. Air Pressure 1.23 mmH₂O
- Max. Noise Level 26.8 dB(A)
- MTBF Min. 50,000 Hours
- Illumination 8x Addressable RGB LED
- Color Versions Black, White
- Weight incl. Fixed Cable 130 g
- Dimensions (L x W x H) 120 x 120 x 25 mm
Cable and Connectors
- Fan Connector 4-Pin PWM
- LED Connector 4-Pin (5V-D-coded-G)
- Fan Cable Length 600 mm
- LED Cable Length 600 mm
Electrical Specifications
- Rated Voltage (Fan) 12 V
- Rated Voltage (LEDs) 5 V
- Rated Current (Fan) 0.19 A
- Rated Current (LEDs) 0.27 A
- Rated Power (Fan) 2.28 W
- Rated Power (LEDs) 1.35 W
- Start Voltage 7 V
Package Contents
- SHARK Mirror RGB PWM (REVERSE), Set with Fan Screws
Connect Fan and LED
Direction of Airflow
Note
Legal Disclaimer
For potential loss of data, especially due to inappropriate handling, Sharkoon assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.
Disposal of your old products
Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.
Follow us on social media!
Sharkoon Technologies GmbH Grüninger Weg 48 35415 Pohlheim Germany © Sharkoon Technologies 2024
Documents / Resources
 |
Sharkoon SHARK Mirror PWM RGB Fan [pdf] Instruction Manual SHARK Mirror PWM RGB Fan, SHARK Mirror, PWM RGB Fan, RGB Fan, Fan |
