GEOMETRICFUTURE-LOGO

GEOMETRICFUTURE 2501 Squama RGB PWM Fan

GEOMETRICFUTURE-2501-Squama-RGB-PWM-Fan-PRODUCT

2501B SINGLE PACK

GEOMETRICFUTURE-2501-Squama-RGB-PWM-Fan-FIG- (1)

2501B TRIPLE PACK

GEOMETRICFUTURE-2501-Squama-RGB-PWM-Fan-FIG- (2)

2501W SINGLE PACK

GEOMETRICFUTURE-2501-Squama-RGB-PWM-Fan-FIG- (3)

2501W TRIPLE PACK

GEOMETRICFUTURE-2501-Squama-RGB-PWM-Fan-FIG- (4)

OVERVIEW

Fans/ARGB Cable Connecting to the motherboardGEOMETRICFUTURE-2501-Squama-RGB-PWM-Fan-FIG- (5)

WARRANTY SUPPORT

Troubleshooting
If your product does not operate properly, please follow the instructions below:

  1. Please check your system’s power.
  2. Please make sure all the connectors are connected properly.

Notices

  1. Install per the user manual’s instructions and safety warnings. Incorrect installation may burn out the motherboard and other system components.
  2. Keep this product away from areas with high temperatures such as heat dissipation machines, air conditioners, or other machines which may generate high temperatures.
  3. Please do not put anything in the impeller.
  4. Do not modify the cables and/or connectors included with this product.
  5. Please do not put your hands or other objects into the fan blades when the fan is in operation. And please make sure to keep away from children and pets.
  6. Please only use this product in a computer case.
  7. Please keep this product away from any liquids.
  8. Please use only this product’s exclusively supplied cables. Other cables may not be compatible and could cause serious damage to your system and power supply.

Manufacturer Name And Address

  • Suzhou Geometric Future Technology Co., LTD
  • Room 701, Building 1, Xingdonghuan Business Building, No.1508 Donghuan Road, Suzhou Industrial Park of China

EU Recycling Information (WEEE)
per the European union’s directive (2012/19/EU) on the waste of electrical and electronic equipment (WEEE), this symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste, instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off waste equipment for recycling, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

MORE INFO

Documents / Resources

GEOMETRICFUTURE 2501 Squama RGB PWM Fan [pdf] Instruction Manual
2501, 2501 Squama RGB PWM Fan, Squama RGB PWM Fan, RGB PWM Fan, PWM Fan, Fan

References

Leave a comment

Your email address will not be published. Required fields are marked *