USER MANUAL

Shark IQ Robot

Shark
IQ Robot

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot.

STEP-1: SET UP THE ROBOT

Remove all plastic films before use. Robot may take up to 15 seconds to turn on. Robot will say “Hello, let’s get cleaning” when ready to use.

Press switch to I to turn on power
Press switch to I to turn on power.

STEP-2 : SET UP THE SELF-EMPTY BASE

Place the base in an open, central location, with its back against the wall. Connect the cord to the port on the back. Plug the cord into an outlet, and the indicator light on the base will turn green.

BACK OF THE BASE
BACK OF THE BASE

STEP-3: CHARGE THE ROBOT

Place the robot two feet away from the base, then press the Dock button on the robot.

Evacuation of debris from the robot into the Self-Empty Base will occur after robot docks successfully.

Docked and Charging: Battery and Base indicator lights will turn blue.

Charging is complete: BATTERY on the robot will illuminate steadily in blue.

STEP-4: DOWNLOAD THE SHARK CLEAN™ APP

Scan the QR code, or search for Shark Clean in the app store and download the app to your device. See other side for pairing instructions.

DOWNLOAD THE SHARK

To send your robot into action without using the app, simply press the Clean button.

THE SHARK CLEAN

For assistance, visit us online at sharkclean.com or contact us at 800-798-7398

©2019 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. SHARK CLEAN, SHARK IQ ROBOT, and SHARK IQ ROBOT SELF-EMPTY are trademarks of SharkNinja Operating LLC. APPLE, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.

PAIRING ROBOT WITH SHARK CLEAN™ APP • FOLLOW INSTRUCTIONS ON OTHER SIDE FIRST To set

STEP-1: Create An Account

  • Launch Shark Clean app on your device.
  • Create your account by entering your email address and choosing a password.
Create An  Account

STEP-2: Activate Robot Wi-Fi

With the robot powered on, press and hold the Dock and Clean buttons simultaneously until the Wi-Fi indicator light starts blinking.

iOS users go to Step 3. Android users skip to Step 4.

Activate  Robot Wi-Fi

STEP-3: iOS Only Select Robot

Exit the app and open Wi-Fi settings. Select your robot (Shark_RVXXX) from the drop-down menu. Exit settings and return to the Shark Clean app.

iOS Only Select Robot

STEP-4: Connect To Home Wi-Fi

  • Select your home Wi-Fi network and enter the Wi-Fi password.
  • Note: your network must be 2.4 GHz to work with the app.
Connect To  Home Wi-Fi

STEP-5: Ready To Clean!

  • When pairing is complete, the Success screen will appear.
  • The Wi-Fi icon on the robot will turn a steady blue.
Ready To  Clean!

To set up voice control using Google Home or Amazon Alexa, visit sharkclean.com/app for instructions. For additional help, visit: sharkclean.com/robothelp

Questions about your Manual? Post in the comments!

Leave a comment

Your email address will not be published. Required fields are marked *