Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual WARNING
To reduce the risk of fire, electric shock, injury, or property damage:

GENERAL WARNINGS
When using an electrical appliance, basic precautions should always be followed,
including the following:

  1. Robotic vacuum cleaner consists of a
    robotic vacuum and charging base with
    power supply. These components contain
    electrical connections, electrical wiring,
    and moving parts that potentially present
    risk to the user.
  2. Before each use, carefully inspect all
    parts for any damage. If a part is
    damaged,
    discontinue use.
  3. Use only identical replacement parts.
  4. This robotic vacuum cleaner contains no
    serviceable parts.
  5. Use only as described in this manual.
    DO NOT use the robotic vacuum cleaner
    for any purpose other than those
    described in this manual.
  6. With the exception of filters, DO NOT
    expose any parts of the robotic vacuum
    cleaner to water or other liquids.
    USE WARNINGS
  7. This appliance can be used by persons
    with reduced physical, sensory or mental
    capabilities or lack of experience and
    knowledge if they have been given
    supervision or instruction concerning
    use of the appliance in a safe way and
    understand the hazards involved.
    a) Children shall not play with the
    appliance.
    b) Cleaning and user maintenance shall
    not be made by children without
    supervision.
  8. For your robot’s cliff sensors to work
    properly, all runners, rugs, or carpets must
    be eight inches from any stairs ( or it must
    be continuous and extend over the edge
    of the stairs). If a runner, rug or carpet
    edge that is less than four inches from the
    stairs cannot be moved, you must use a
    BotBoundary strip to block off the stairs.
    The BotBoundary strips are included
    with your robot but can be purchased by
    contacting Shark Customer Service at
    1-888-228-5531.
  9. Do not place BotBoundary strips on top of
    one another.
  10. Do not place bot boundaries under
    carpeting or rugs.
  11. Always use bot boundary strips around
    reflective flooring and surfaces.
  12. Be sure bot boundaries completely
    enclose desired areas. Gaps may cause
    bot boundaries to malfunction.
  13. Always turn off the robotic vacuum
    cleaner before inserting or removing the
    filter or dust bin.
  14. DO NOT handle plug, charging base,
    charging cable, or robotic vacuum
    cleaner with wet hands. Cleaning and
    user maintenance shall not be made by
    children without supervision.
  15. DO NOT use without robot dust bin and
    filters in place.
  16. DO NOT damage the charging cord:
    a) DO NOT pull or carry charging base
    by the cord or use the cord as a
    handle.
    b) DO NOT unplug by pulling on cord.
    Grasp the plug, not the cord.
    c) DO NOT close a door on the cord,
    pull the cord around sharp corners,
    or leave the cord near heated
    surfaces.
  17. DO NOT put any objects into nozzle or
    accessory openings. DO NOT use with any
    opening blocked; keep free of dust, lint,
    hair, and anything that may reduce airflow.
  18. DO NOT use if robotic vacuum cleaner
    airflow is restricted. If the air paths
    become blocked, turn the vacuum cleaner
    off and remove all obstructions before
    turning on the unit again.
  19. Keep nozzle and all vacuum openings
    away from hair, face, fingers, uncovered
    feet, or loose clothing.
  20. DO NOT use if robotic vacuum cleaner
    is not working as it should, or has been
    dropped, damaged, left outdoors, or
    dropped into water.
  21. DO NOT place vacuum cleaner on
    unstable surfaces.
  22. DO NOT use to pick up:
    a) Liquids
    b) Large objects
    c) Hard or sharp objects (glass, nails,
    screws, or coins)
    d) Large quantities of dust (drywall
    dust, fireplace ash, or embers). DO
    NOT use as an attachment to power
    tools for
    dust collection.
    e) Smoking or burning objects (hot
    coals, cigarette butts, or matches)
    f) Flammable or combustible materials
    (lighter fluid, gasoline,
    or kerosene)
    g) Toxic materials (chlorine bleach,
    ammonia, or drain cleaner)
  23. DO NOT use in the following areas:
    a) Wet or damp surfaces
    b) Outdoor areas
    c) Spaces that are enclosed and may
    contain explosive or toxic fumes
    or vapors (lighter fluid, gasoline,
    kerosene, paint, paint thinners,
    mothproofing substances, or
    flammable dust)
    d) Near fireplaces with unobstructed
    entrances.
    e) In an area with a space heater.
  24. Turn off the robotic vacuum cleaner before
    any adjustment, cleaning, maintenance or
    troubleshooting.
  25. Allow all filters to air-dry completely
    before replacing in the robotic vacuum
    cleaner to prevent liquid from being drawn
    into electric parts.
  26. DO NOT modify or attempt to repair the
    robotic vacuum cleaner or the battery
    yourself, except as indicated in this
    manual. DO NOT use the vacuum if it has
    been modified or damaged.
  27. To reduce the risk of electric shock, this
    appliance has a polarized plug (one blade
    is wider than the other). This plug will fit
    in a polarized outlet only one way. If the
    plug does not fit fully in the outlet, reverse
    the plug. If it still does not fit, contact a
    qualified electrician to install the proper
    outlet. Do not change the plug in any way.
  28. In case the self-empty base has a thermal
    shutoff the unit needs to have a hard
    power reset to restart.
    BATTERY USE
  29. The battery is the power source for
    the vacuum. Carefully read and follow
    all charging instructions.
  30. To prevent unintentional starting, ensure
    the vacuum is powered off before picking
    up or carrying the vacuum. DO NOT carry
    the appliance with your finger on the
    power switch.
  31. Use ONLY the Shark® self-empty base
    XSKAEDOCK and use only battery
    RVBAT850. Use of batteries or battery
    chargers other than those indicated may
    create a risk of fire.
  32. Keep the battery away from all metal
    objects such as paper clips, coins, keys,
    nails, or screws. Shorting the battery
    terminals together increases the risk of fire
    or burns.
  33. Under abusive conditions, liquids may be
    ejected from the battery. Avoid contact
    with this liquid, as it may cause irritation or
    burns. If contact occurs, flush with water. If
    liquid contacts eyes, seek medical help.
  34. Robotic vacuum cleaner should not be
    stored, charged, or used at temperatures
    below 50°F (10°C) or above 104°F
    (40°C). Ensure the battery and vacuum
    have reached room temperature before
    charging or use. Exposing the robot or
    battery to temperatures outside of this
    range may damage the battery and
    increase the risk of fire.
  35. DO NOT expose the robotic vacuum
    cleaner or battery to fire or temperatures
    above 265°F (130°C) as it may cause
    explosion.

SAVE THESE INSTRUCTIONS
For the latest warnings and cautions, go to sharkclean.com/robothelp

GETTING TO KNOW YOUR SHARK IQ ROBOT®
Shark IQ Robot RV1000AE Series Robot Vacuum User Manual GETTING TO KNOW YOUR SHARK IQ ROBOT
Shark IQ Robot RV1000AE Series Robot Vacuum User Manual BASE SETUP
Shark IQ Robot RV1000AE Series Robot Vacuum User Manual The Self-Empty Base charges your robot and holds dirt and debris from up to 30 days of cleaning. Select a permanent location for the base, because every time you relocate it, your robot will have to completely re-map your house.
Choose a level surface in a central area. Remove any objects that are closer than 3 feet from either side of the base, or closer than 5 feet from the front of the base. Plug in the Charging Cord, then place the base with its back against the wall, in an area with a good Wi-Fi signal. For best results, set up base on hard floor,
or on the SharkMat. The base must be plugged in continuously for the robot to find it. The Indicator Light will illuminate green when the base has power.

NOTE: For best results, set up on hard floor or thin carpet.
NOTE: Do not place dock against baseboards, heating elements, or in direct sunlight.

INSTALLING THE SIDE BRUSHES

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual Snap the 2 included Side Brushes onto the square
pegs on the bottom of the robot.

 

 

CHARGING

IMPORTANT: The Shark iQ Robot® has a pre-installed rechargeable battery. Battery should be fully charged before using. It may take up to 6 hours to fully charge

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

To charge, the Power button on the side of the robot
must be in the ON position (I). The robot will beep
when charging begins.

When the cleaning cycle is complete, or if the battery
is running low, the robot will search for the base.
If your robot doesn’t return to the base, its charge
may have run out.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

If the robot has no charge and cannot return to
the base, manually place it on the base. The base
indicator light will flash blue and the robot will
beep when charging begins.

NOTE: When manually placing the robot on the base, make sure the Charging Contacts on the bottom of the robot are
touching the ones on the base and the robot’s dust bin is touching the debris intake on the base. While the robot is
charging, both blue LED lights will flash. When charging is complete, both blue lights will illuminate steadily.

NOTE: When picking up the robot be careful not to place fingers between the bumper and the base of the robot.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

The blue indicator lights on the robot show how much charge is remaining.
While the robot is charging, both blue LED lights will flash. When charging is complete, both blue lights will illuminate steadily. It may take up to 6 hours to fully charge your robot.

BUTTONS AND INDICATOR LIGHTS

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

NOTE: If the low charge light is blinking red, there is not enough charge for the robot to return to the base. Manually place the robot on the base.

PREP YOUR HOME

Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it cleans. To prevent the robot from bumping into objects or navigating to areas you don’t want it to, use the included BotBoundary® strips. For best results, prepare your home as indicated below, and schedule a daily cleaning to ensure all floor areas are regularly maintained.

NOTE: Scheduling can only be done in the app.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

NOTE: Bot boundaries must be placed flat-side down,
NOTE: bot boundaries should always be used near
carpeted stairs.

MAPPING AND NAVIGATION

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

As it cleans, your robot will create a map of your
home. It may take several cleanings for the robot to
finish its mapping. Once mapping is complete, an
Interactive Map of your floor plan will be available
on the app.

The interactive map in the app allows you to name
rooms, then select which rooms to clean, and
send the robot to immediately clean one specific
location.
As cleanings continue, the robot will update and
refine its path to provide optimized cleaning coverage.
After each use, a cleaning report will be available
in the app.

MANUAL CLEANING MODE

To manually start a cleaning cycle, press the Clean button on the robot or on the mobile app. To stop the
robot before it finishes cleaning and automatically returns to the base, press the Dock button

NOTE: Be sure to charge the robot completely before its first cleaning so that it can explore, map, and clean as much of
your home as possible. It may take up to 6 hours to fully charge the robot.

NOTE: Avoid picking up and moving the robot or base. If either are relocated, the robot may not be able to follow its
intelligent cleaning path, or find its way back to the base. If the robot is picked up or moved for any reason, it should be
returned to within 6 inches of its last location.

USING THE SHARK IQ ROBOT®

Please visit sharkclean.com/app or call 1-888-228-5531 for answers to all your app questions.

USING THE SHARKCLEAN™ APP AND VOICE CONTROLS

Get the most out of your Shark iQ Robot® with these app features:

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual • Interactive Map
Your robot knows where it is in your home. Identify rooms
for Room Select.
• Room Select
Immediately send your robot directly to any room on that
floor.
• Recharge and Resume
Use Recharge and Resume to help ensure complete, multi-room coverage in your
home.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual • Scheduling
Set whole home cleanings for any time, any day.
• Control From Anywhere
Wherever you are, you’re in control of your robot.
• Cleaning Reports
Each time your robot cleans, your app will generate a cleaning report.

Search for SharkClean in the app store and download the app to your iPhoneTM or AndroidTM.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

SETTING UP VOICE CONTROL WITH THE GOOGLE ASSISTANT OR AMAZON ALEXA
Visit sharkclean.com/app for setup instructions which include how to enable Shark Skill for Amazon Alexa
and using with Google Assistant.

Google Assistant:
“OK Google, tell Shark to start cleaning.”
“OK Google, tell Shark to pause my robot.”
“ OK Google, tell Shark to send my robot to
the dock.”
Amazon Alexa:
“Alexa, tell Shark to start cleaning.”
“Alexa, tell Shark to pause my robot.”
“ Alexa, tell Shark to send my robot to
the dock.”

WI-FI TROUBLESHOOTING

  • To use the app, your phone must be connected
    to a 2.4GHz network. The app will only work on a
    2.4GHz network.
  • Typical home Wi-Fi networks support both 2.4GHz
    and 5GHz.
  • Do not use a VPN or a proxy server.
  • Make sure Wi-Fi isolation is turned off on the
    router.
  • If you cannot connect, call 1-888-228-5531.

  ERROR CODE

  PROBLEM

  ! (RED) + Wi-Fi indicator (RED Flashing)   Wrong password for Wi-Fi
  ! (Flashing red) + Wi-Fi (RED)   SSID cannot be found, try connecting again
  ! + Wi-Fi (Flashing RED alternately)   Wrong user name or password for your Shark account
  ! + Wi-Fi (Flashing RED at the same time)   Cannot connect to Wi-Fi

MAINTENANCE

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual CAUTION: Turn off power before performing any maintenance

EMPTYING THE ROBOT DUST BIN

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

Press the Dust Bin Release Tabs and slide out the dust bin.

To avoid spills, be sure to hold the dust bin in an upright position. Pinch and lift to open the lid.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

Empty debris and dust into trash.

Look between the filter and plastic shield and make
sure there is no debris buildup. Remove and clean any debris build-up as needed
with a dry cloth or soft brush.

MAINTENANCE

EMPTYING THE BASE DUST BIN

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

The Base Dust Bin holds up to 30 days’ worth of
dust and debris. Empty the bin when the debris
level approaches the max fill line.
To detach it, press the Release button on top of
the handle, then tilt the bin and lift it off

To empty the bin, hold it over a trash can and press
the Empty button on the side.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

MAINTENANCE

CLEANING AND REPLACING THE ROBOT FILTER

For optimal suction power, regularly clean and replace the filter inside the robot’s dust bin.
See sharkaccessories.com for replacement filters.
IMPORTANT: DO NOT use water to clean the robot filter

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

MAINTENANCE

SELF-CLEANING BRUSHROLL

The Self-Cleaning Brushroll removes debris over time as it cleans. If some debris remains wrapped around
the brushroll, continue cleaning to allow the brushroll to remove it.
If some debris remains on the brushroll after continued cleaning, follow the steps below to remove it.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

To access the brushroll, push up on the tabs on the
brushroll access door, then lift off the door

Lift out the brushroll. Clean off any debris. Reinstall
the brushroll, inserting the flat end first. Close the
brushroll access door and press down until both
sides click into place.

NOTE: The pre-motor foam and felt filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years.
NOTE: Clean the mesh filter inside the dust bin with a small brush once a month.

NOTE: When cutting away debris, be sure not to cut the brushroll.
NOTE: Replace brushroll every 6 to 12 months, or when visibly worn. See sharkaccessories.com for replacement parts.

MAINTENANCE

CLEANING SENSORS AND CHARGING PADS

CLEAN SENSORS AND CHARGING PADS AS NEEDED. With a dry cloth, gently dust off the sensors and
pads located on the bottom of the robot and on the base.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

IMPORTANT: The robot uses cliff sensors to avoid stairs and other steep drops. Sensors may work less effectively when
they are dirty. For best results, clean sensors regularly.

CLEANING SIDE BRUSHES

CLEAN SIDE BRUSHES AS NEEDED.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual Carefully unwind and remove any string or hair
wrapped around brushes.
Gently wipe brushes with a dry cloth. To reinstall,
snap the brushes over the pegs. Spin the brushes
manually to make sure they are installed correctly

NOTE: Remove and replace any side brushes that are bent or damaged. To remove a brush, lift it off its peg.

MAINTENANCE

CLEANING THE WHEELS

REMOVE AND CLEAN THE FRONT CASTER WHEEL AS NEEDED.
See sharkaccessories.com for replacement parts.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

Pull the Front Caster Wheel from its housing and
remove any debris buildup.

Clean the wheel housing, then reinsert the
caster wheel.

NOTE: Tools may be required to pry off front caster wheel.
NOTE: Brush not included.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

Periodically clean the drive wheels and the
housing around them. To clean, rotate each drive
wheel while dusting.

REPLACEMENT PARTS

REPLACEMENT PARTS: ROBOT      REPLACEMENT PARTS: BASE

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

NOTE: To order replacement parts and filters, visit sharkaccessories.com.

MAINTENANCE

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual CAUTION: Turn off power before performing any maintenance.

TROUBLESHOOTING

If any error lights are illuminated or flashing on your Shark iQ Robot®, see the error code chart below

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE

BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT: SharkNinja Operating
LLC’s (“SharkNinja”) End-User License Agreement (“EULA”) is a legal agreement between You (either
a single entity or an individual) and SharkNinja for SharkNinja’s Software Applications, including those
installed by You onto your SharkNinja products or already installed on your device, including all firmware
(referred hereafter as “SN APPS”). By installing, copying, checking a box, clicking a button confirming
your agreement to these terms, or otherwise continuing to use the SN APPS, You agree to be bound by the
terms of this EULA. This license agreement represents the entire agreement concerning SN APPS between
You and SharkNinja, and it supersedes any prior proposal, representation, or understanding between the
parties. If You do not agree to the terms of this EULA, do not install or use the SN APPS or this product.
The SN APPS are protected by copyright laws and international copyright treaties, as well as other
intellectual property laws and treaties.

1. GRANT OF LICENSE. The SN APPS are licensed as follows:
1.1 Installation and Use. SharkNinja grants You the right to download, install, and use SN APPS on the
specified platform for which the SN APP was designed and in connection with SharkNinja products with
which the SN APPS are designed to operate (“SN Devices”).
1.2 Backup Copies. You may also make a copy of SN APPS downloaded and installed by You for backup and
archival purposes.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
2.1 Maintenance of Copyright Notices. You must not remove or alter any copyright notices on any and all
copies of the SN APPS.
2.2 Distribution. You may not distribute copies of the SN APPS to third parties.
2.3 Prohibition on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer,
decompile, or disassemble SN APPS, except and only to the extent that such activity is expressly permitted
by applicable law notwithstanding this limitation.
2.4 Rental. You may not rent, lease, or lend SN APPS without written permission from SharkNinja.
2.5 NOT FOR RESALE SOFTWARE. Applications identified as “Not for Resale” or “NFR,” may not be resold,
transferred, or used for any purpose other than demonstration, test, or evaluation.
2.6 Support Services. SharkNinja may provide You with support services related to SN APPS (“Support
Services”). Any supplemental software code provided to You as part of the Support Services shall be
considered part of SN APPS and subject to the terms and conditions of this EULA.
2.7 Compliance with Applicable Laws. You must comply with all applicable laws regarding use of SN APPS.

3. UPDATES. SharkNinja may provide You with upgrades or updates to SN APPS. This EULA will govern
any upgrades provided by SharkNinja that replace and/or supplement SN APPS, unless such upgrade is
accompanied by a separate EULA, in which case the terms of that EULA will govern. If You decide not to
download and use an upgrade or update provided by SharkNinja, You understand that You could put SN
Apps at risk to serious security threats or cause SN Apps to become unusable or unstable.

4. DATA AND PRIVACY. SharkNinja is committed to ensuring your privacy by adhering to high standards
of fairness and integrity. We are committed to keeping our customers informed about how we use the
information we gather from You through the use of each of our websites or SN APPS. Our privacy practices
are described in SharkNinja’s Privacy Policy, as well as in separate notices given when an app, product, or
service is purchased or downloaded. By using SN APPs or providing us with your personal information,
You are accepting and consenting to the practices, terms, and conditions described in SharkNinja’s Privacy
Policy. At all times your information will be treated in accordance with the SharkNinja Privacy Policy,
which is incorporated by reference into this EULA and can be viewed at the following URL:
http://www.sharkninja.com/privacypolicy.

5. THIRD-PARTY APPLICATION LIBRARIES AND EMBEDDED SOFTWARE.
5.1 You acknowledge that Ayla Networks, Inc. (“Ayla”) has provided certain application libraries that have
been embedded into SN APPS (“Ayla Application Libraries”) and enables SN Devices to connect to the Ayla
Cloud Service (“Ayla Embedded Software”).
5.2 You will not use the Ayla Application Libraries except as an incorporated portion of SN APPS,
unmodified from the form provided to You.
5.3 You will not use the Ayla Embedded Software except as an incorporated portion of SN Devices,
unmodified from the form provided to You.
5.4 You will not modify, adapt, translate, or create derivative works based on, or decompile, disassemble,
reverse engineer, or otherwise attempt to derive the source code or underlying algorithms of, the Ayla
Application Libraries or the Ayla Embedded Software.
5.5 SharkNinja retains all ownership of SN APPS (and the Ayla Application Libraries contained therein) and
any software installed on SN Devices (including the Ayla Embedded Software) and only a license thereto is
granted to You for use in connection with the SN APPS and SN Devices.

END-USER LICENSE AGREEMENT FOR SHARKNINJA SOFTWARE

5.6 You will not use the Ayla Application Libraries or Ayla Embedded Software to attempt to gain
unauthorized access to or use of the systems/services of SharkNinja’s other licensors; nor will You transmit
viruses, worms, Trojan horses, time bombs, spyware, malware, cancelbots, passive collection mechanisms,
robots, data mining software, or any other malicious or invasive code or program into the systems/services
of SharkNinja’s other licensors.
5.7 You will not use the Ayla Application Libraries or Ayla Embedded Software to interfere with, breach,
or circumvent any security feature, authentication feature, or any other feature that restricts or enforces
limitations on the use of, or access to, the systems/services of SharkNinja’s other licensors.
5.8 You will not probe, attack, scan, or test the vulnerability of the systems/services of SharkNinja’s other
licensors.
5.9 SharkNinja’s other licensors of the SN APPS, Ayla Application Libraries, and the Ayla Embedded
Software are the express third-party beneficiaries of this EULA, and the provisions of this Section of this
EULA are made expressly for the benefit of such licensors, and are enforceable by such licensors.

6. TERMINATION. Without prejudice to any other rights, SharkNinja may terminate this EULA if You fail to
comply with the terms and conditions of this EULA. In such event, You must destroy all copies of SN APPS
in your possession.
7. COPYRIGHT. All title, including but not limited to copyrights, in and to SN APPS and any copies thereof
are owned by SharkNinja or its suppliers. All title and intellectual property rights in and to the content
which may be accessed through use of SN APPS are the property of the respective content owner and may
be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants You
no rights to use such content. All rights not expressly granted are reserved by SharkNinja.
8. OPEN SOURCE SOFTWARE. You hereby acknowledge that SN APPS may contain software that is
subject to “open source” or “free software” licenses (“Open Source Software”). The license granted by this
EULA does not apply to Open Source Software contained in the SN APPS. Rather, the terms and conditions
in the applicable Open Source Software license shall apply to the Open Source Software. Nothing in this
EULA limits your rights under, or grants You rights that supersede, any Open Source Software license. You
acknowledge that the Open Source Software license is solely between You and the applicable licensor of
the Open Source Software. To the extent the terms of the licenses applicable to the Open Source Software
require SharkNinja to provide the Open Source Software, in either source or executable form, or to provide
copies of applicable license terms or other required information, You may obtain a copy of the software
by contacting SharkNinja at the below physical address. Additional information about the Open Source
Software, and its terms of use, may be found at www.sharkclean.com/opensource.
9. NO WARRANTIES. SharkNinja expressly disclaims any warranty for SN APPS, Ayla Application Libraries,
or Ayla Embedded Software. SN APPS, Ayla Application Libraries, and Ayla Embedded Software are
provided ‘As Is’ without any express or implied warranty of any kind, including but not limited to any
warranties of merchantability, noninfringement, fitness of a particular purpose, or title. SharkNinja does
not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics,
links, or other items contained within the SN APPS. SharkNinja makes no warranties respecting any harm
that may be caused by the transmission of a computer virus, worm, logic bomb, or other such computer
program. SharkNinja further expressly disclaims any warranty or representation to any third party.
10. LIMITATION OF LIABILITY. In no event shall SharkNinja or its suppliers be liable for any special,
incidental, punitive, indirect, or consequential damages whatsoever (including, but not limited to, damages
for loss of profits or confidential or other information, for business interruption, for personal injury, for
loss of privacy, for failure to meet any duty including of good faith or of reasonable care, for negligence,
and for any other pecuniary or other loss whatsoever) arising out of or in any way related to the use of or
inability to use SN Devices or SN APPS, the provision of or failure to provide support or other services,
information, software, and related content through the product or otherwise arising out of the use of
SN APPS, or otherwise under or in connection with any provision of this EULA, even in the event of the
fault, tort (including negligence), strict liability, breach of contract, or breach of warranty of SharkNinja or
any supplier, and even if SharkNinja or any supplier has been advised of the possibility of such damages.
SharkNinja shall have no liability with respect to the content of the SN APPS or any part thereof, including
but not limited to errors or omissions contained therein, libel, infringements of rights of publicity, privacy,
trademark rights, business interruption, personal injury, loss of privacy, moral rights, or the disclosure of
confidential information.
11. APPLICABLE LAW. The laws of the Commonwealth of Massachusetts will govern this EULA and
You hereby consent to exclusive jurisdiction and venue in the state and federal courts sitting in the
Commonwealth of Massachusetts.
12. ASSIGNMENT. SharkNinja may assign this EULA without notice to Licensor.
13. ENTIRE AGREEMENT. This EULA (including any addendum or amendment to this EULA which is
included with the SN Devices) is the entire agreement between You and SharkNinja relating to the SN
APPS and supersedes all prior or contemporaneous oral or written communications, proposals and
representations with respect to the SN APPS or any other subject matter covered by this EULA. To the
extent the terms of any SharkNinja policies or programs for support services conflict with the terms of this
EULA, the terms of this EULA shall control.
If You have questions regarding this EULA, please contact SharkNinja at 89 A Street, Suite 100,
Needham, MA 02494.

ONE (1) YEAR LIMITED WARRANTY

The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja
Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and
maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later.
SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?

  1. Normal wear and tear of wearable parts (such as foam filters, filters, batteries, brushrolls, etc.), which
    require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not
    covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
  2. Any unit that has been tampered with or used for commercial purposes.
  3. Damage caused by misuse (e.g., vacuuming up water or other liquids), abuse, negligent handling, failure
    to perform required maintenance (e.g., not cleaning the filters), or damage due to mishandling in transit.
  4. Consequential and incidental damages.
  5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused
    in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the
    repair is performed by a repair person not authorized by SharkNinja.
  6. Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty
period, visit sharkclean.com/support for product care and maintenance self-help. Our Customer Service
Specialists are also available at 1-888-228-5531 to assist with product support and warranty service options,
including the possibility of upgrading to our VIP warranty service options for select product categories.
Please register your product and have it with you when contacting Customer Service.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of
$24.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-888-228-5531 to initiate a warranty claim. You will need the receipt as proof of purchase.
A Customer Service Specialist will provide you with return and packing instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to
state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the
above may not apply to you.

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

RECORD THIS INFORMATION
Model Number: ________________________
Date Code: ____________________________
Date of Purchase: ______________________
(Keep receipt)
Store of Purchase: ______________________

TIP: You can find the model and serial
numbers on the QR code label on the
bottom of the robot.

EXPECTED PERFORMANCE
Expected runtime: at least 60 minutes
Expected charging time: 6 hours

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
This Owner’s Guide is designed to help you keep your Shark iQ Robot® running at peak
performance.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-888-228-5531
sharkclean.com
Illustrations may differ from actual product. We are constantly striving to improve our products;
therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

FCC WARNINGS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to parts 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Device complies with part 15 of the FCC rules. Operation is subject to the following conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.
    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

BATTERY REMOVAL AND DISPOSAL
This product uses a battery. When the battery no longer holds a charge, it should be removed from the vacuum and recycled. DO NOT incinerate or
compost the battery.
When your lithium-ion battery needs to be replaced, dispose of it or recycle it in accordance with local ordinances or regulations. In some areas, it is
illegal to place spent lithium-ion batteries in the trash or in a municipal solid waste stream. Return spent battery to an authorized recycling center or to
retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery.

For more information on battery removal for disposal, please visit sharkclean.com/batterysupport.
The RBRC™ (Rechargeable Battery Recycling Corporation) seal on the lithium-ion battery indicates that the costs to recycle the battery at the end of
its useful life have already been paid by SharkNinja. In some areas, it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste
stream and the RBRC program provides an environmentally conscious alternative.
RBRC, in cooperation with SharkNinja and other battery users, has established programs in the United States and Canada to facilitate the collection
of spent lithium-ion batteries. Help protect our environment and conserve natural resources by returning the spent lithium-ion battery to an
authorized SharkNinja service center or to your local retailer for recycling. You may also contact your local recycling center for information on whe

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual

reto drop off the spent battery, or call 1-800-798-7398.

 

Read More About This Manual & Download PDF:

 

Shark IQ Robot RV1000AE Series Robot Vacuum User Manual – Optimized PDF
Shark IQ Robot RV1000AE Series Robot Vacuum User Manual – Original PDF

Leave a comment

Your email address will not be published. Required fields are marked *