814100191C CH701 SERIES
FEATUREDS
A Air-Intake Nozzle
B Dust Cup Release Button
C Filter
D Charging Indicator Light
E On/Off Switch
F Vacuum Body
G USB-C Charger
H Upholstery Tool
I Crevice Tool* Accessory type and quantity may vary depending on the model
The images shown in this manual are fo sstrative purposes only and may be subject to change.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL + HOUSEHOLD USE ONLY
WARNING
To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
POWER SUPPLY, CHARGING ADAPTER, AND VACUUM CONTAIN ELECTRICAL CONNECTIONS. WHEN USING AN ELECTRICAL APPLIANCE, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
- There re N0 serviceablepars.
- DO NOT use to vacuum any liquids.
- DO NOT immerse n waterof oter ids.
- Ifvacuum s damaged, discontnue use.
- To avoid fire, explosion, or injury,inspect vacuum and charging dock for any damage before use.
DO NOT use damaged vacuum or charging dock. - DO NOT use utdoors oron wet surfaces Useanly on iy surfaces.
- If vacuum deare f ot workingas I should,orhas been dropped. damaged. et utdoors, or Immersed in ‘water, contact a service center.
- DO NOT handle charger or vacuum deaner ith wet hans.
- DO NOT leave vacuum dleaner unattended while powered on.
- Keep vacuum away from heated surfaces.
- Always tur off vacuum before connecting charging adapter.
- DO NOT incinerate appliance, even it s severely damaged, s Ehium-fon attery may explode nafre.
- Useanly withLised/Certiied Informtion Technology (Computer) Equipment, Listed/Cetied TE Power Supply, orLstd Cass 2 Povier Uit GENERAL USE
- DO NOT carry the charger by the cord or yank to disconnect from an outlet; instead grasp the plug and pull to discomnect.
- Keep charger cord away from heated surfaces.
- Use only as described in this manual.
- Keep your work area well it
- To avold unintentionalstarting, avays tur off e vacuum deaner before picking itup or carryng i, and before attaching or detaching the charger, dust cup, filer, or any accessories.
- DO NOT put any objects nto openings.
- D0 NOT use ifany opening Is blockec: Keep free ofdust, lint, hai, or anything that may reduce aifiow.
- DO NOT use without dust cup and filer in place.
- Persans with reduced physica, sensory, o mentalcapabiles may only use the vacuum withsupevsionofprior safety instrucion and an understanding of the hazardsInvolved. Chidren may ot clean o maitaln the vauum without supervison.This acuum s not atoy.
- DO NOT use arfow i retriced; fthe ar pais become locked, turn off the vacuum deaner, Clear al obstructions and power o again.
- Keep nozleawy from har, face fingers, uncovered feet, oroose cothing.
- Only use manufactuer’s ecommended atachments.
- DO NOT charge attemperatures below SO°F (10°C) o above 104°F (40°C). harging Impraperly or at femperatures outsde of e speced range may damage the batery and ncrease therisk of fire.
- Store the applanceindoors. DONOT use o sore it elow S24°F (3%, Ensure the applance s at room temperature before peraing.
DUST CUP/FILTER/ACCESSORIES
Before turning on the vacuu: - Hake surefiteris thoroughly dy after routie ceaning.
- Make sure dust aup and fiter ae nplace aftr outine mainenance.
- Hake sure accessoresare free of blockages and eep openings away from face and body.
- Use only Shark brand filers and accessories.
GENERAL CLEANING - D0 NOT vacuum up hard or sharp objects such as gkas, nails, screws, or coins that could damage the vacuum ceane.
- DO NOT vacuum up dryvill dust, freplaceash, o embers.
- DO NOT use asanattachment o pover ool fo dust collection.
- DO NOT vacuum up smofing or burming objects such s ot coals, garette butts, o malches.
- D0 NOT vacuum up flamimable o combustible materas e, ihter i, gasoline, o kerosene) oruse: vauum I areas whefe they may be present.
- DO NOT vacum up toxicsolutions (e, chlorine bieach, ammonia, or drain leaner).
- DO NOT use n an enclosed space where vaporsare present rom paint, paint thinner, moth-proafing substances, lammable st o athr explosveortoxic mterials.
- D0 NOT immerse vacuur ceaner i water oratherlquids.
- Use extra care when ceanng onstars.
LITHIUM-ION BATTERY - The batieryisthe powersourc for the appiance.DONOY cary the appliance with your fingeronthe power button. DONOT charge apliance with the pover on.
- Charge only with USB-C conmection. Using Unapproved sources may causeisk
- Useapplance oty with induded fhum-ion bttey.Use of any offer battery may aeatearis of injury and fire.
- Under abusive conitions iquid may beeected from thebattery. Avoid contac with liguid, a5t may cause irtaton o burns. I contact occurs, lush with itex. I iuid contacs eyes, seek medical help.
- Store the appliance ndocrs.To maintan batery lfe, DONOT use o stoe battery at temperatures below 374 (30 0r abore 104°F (40°0).
- DO NOT expose appliance o fireor temperature above 266°F (130°0)as it may catse explosion.
- There are NOserviceablearts. To ensure safety, DONOY movify o atiemt t repair the appliance.
- DO NOT use a batery pack o applance tht s damaged or modifie. Damaged of modifed ateries may extibit unpredictabl behavior resulting i ire, exploson, o skof nury.
CHARGING YOUR SHARK” VACUUM
- Make sure to switch the unit into the “O” position to power off before charging.
- Plug the USB-C end of the charging cord into the port on the handle. Plug the USB end of the charging cord into a compatible USB outlet cube or adaptor (not included) and plug into a wall outlet.
NOTE: Lithium-ion battery takes approximately 6 hours to charge completely.
USING YOUR SHARK*® VACUUM
- Slide the switch into “I” position to power on.
- Run the nozzle over the surface to be cleaned.
- To empty the dust cup, first slide the switch into “0 position to power off. Then press the dust cup release button on the back of the hand vac and pull off the dust cup.
- Remove the filter from the dust cup by pulling the tab in the center and then empty the debris into the trash.
- Once debris is emptied, place the filter back in place and reattach the dust cup.
REFURBISHED PRODUCT LIMITED NINE- TY DAYS WARRANTY
The Refurbished Product Service Center offers the following WARRANTY to the ORIGINAL purchaser of a product which we have refurbished This product that has been refurbished is wamranted against any electronic or mechanical defects for a penod of NINE Y DAYS from the date of the original purchase by the consumer. Since this unit was sold as a refurbished tem, the warranty does not apply to any cosmetic appearance items such as scratch- es. Should a defect occur, the Refurbished Product Service Center wil repair or, at its option, replace de- fective unitiparts with new of rebuilt materials without charge for efther parts or labor. Replacement unitpparts will be warranted for the remaining portion of the original warranty period.
This warranty does not cover installation or damage from accident, misuse, abuse, improper wiring, incorrect voltage, operating the unit against the instriictions. in the owner’s manual or any product which has been opened, altered, or tampered with This warranty does not cover costs for removal and or installation of the unit for repair. Under no circum- stances shall the service center be liable for any spe- cial, incidental or consequential damages or for any other expenses incurred by reason of use or sale of this product. This warranty 1s in lieu of any other war- ranties expressed or implied warranty of merchantabi- ity of fitness for particular use or otherwise. This warranty gives the consumer specific legal rights and they may also have other rights which vary from State to State. Some States do not follow the exclusion or limitation of Incidental or consequential damages, hence the above exclusion and imtations may not apply. Refurbished Product Service Center
9043 Siempre Viva Rd Suite 110/120, San Diego CA 92154
WARRANTY REPAIR INFORMATION
If you need service on your unit and this prod- uct requires repair during the 90 days warranty period; please go to www.ConsumerService-Refurbish.com or call the Refurbished Product Service Center at 562-946-3531 to obtain the required return authorization (RA) number. Pack the unit properly (the original carton is ideal for this purpose) along with a copy of your purchase receipt and a letter describing the problem. Send the unit freight prepaid and insured to Refurbished Product Service Center, Att: Customer Service Department 9043 Siempre Viva Rd Suite 110/120, San Diego CA, 92154 Your unit il be promptly repaired and returned to you We will refuse to accept delivery of the returned unit unless the assigned RA number appears on the out- side of the shipping carton.
Owner’s Information
(Keep for your permanent records)
NAME————-
ADDRESS:—————
oITY:———–
STATE:————-
ZIP CODE:—————
PHONE:——-
E-MAIL———-
MODEL:————–
SERIAL NO.—————
ACCESSORIES
INSERTION AND REMOVAL
To install an accessory, align it with the nozzle, then slide it on.
- To remove an accessory, slide it straight off the nozzle.
TROUBLESHOOTING
Problem | Solution |
The vacuum will not operate | Battery needs to be recharged. Lithium-ion battery takes approximately 6 hours to charge completely. Try using a different electrical outlet to charge. |
Vacuum will not pick up or suction is weak | Dust cup is full. Empty the dust cup. The filter needs to be cleaned or replaced. Vacuum needs to be recharged. |
Dust is escaping from the vacuum | Empty the dust cup. The filter may be installed incorrectly. Remove the filter, then reinstall it correctly. Check the filter for holes or punctures. The filter will need to be replaced if there is a hole or puncture. An obstruction may be blocking the dust cup lid, keeping it from closing correctly. Clear any obstructions and ensure the lid is completely closed. |
BATTERY INDICATOR
Pulsing Light | Low Battery | If the power switch is in the (I) position but the power doesn’t turn on and the battery indicator light on the hand vac is pulsing, this means the battery power is too low. Slide the power switch to the (0) position and charge the battery before using the vacuum. |
Pulsing Light (while plugged in) | Vacuum Charging | To charge the vacuum, connect charging cord to unit and plug into wall outlet. The light will turn off when the unit is fully charged. |
No Light | Fully Charged | When the vacuum is fully charged, the indicator light will turn off. (It takes approximately 6 hours for a full charge). |
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfl interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if not installed inaccordance with the instructions, may cause harmful interference to radio communications. However, thare is no guarantes that interference wil not occur in a particula- installation. If this equipment does cause harmful interference to radio SF levision recetion, which can be dotertnied by turning he sauipment off and on, the user is encouraged to try to correct the interference by one or more of the. following moasures:
- Reorient or relocate the recsiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which tho receiver is connected
- Consult the dealer or an experienced racio/TV technician for help.
This Device complies with part 15 of the FCC rules. Operation is subject to the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, ncluding interference that may cause undesired operation.
Changes o- modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
MAINTENANCE
CLEANING THE DUST CUP
- Slide the switch to the “O” position to power off. Press the dust cup release button and pull out the dust cup.
- Carefully take the filter frame out of the dust cup and remove the filter.
- Empty the dust cup into the trash.
- Hand-rinse the filter in cold water and let it air-dry for at least 24 hours before reinstalling. Air-dry only. DO NOT use a hair dryer or clothes dryer.
To clean the interior of the dust cup, rinse it with water. Place it on its side with the lid open to air-dry for at least 24-48 hours before reinstalling.
- When the filter is dry, reinstall into the dust cup, then reattach the dust cup to the main body.
DO NOT wash any parts or accessories in a dishwasher.
NOTE: For best results, replace the filter every 6 to 9 months.
The images shown in this manual are for illustrative purposes only and may be subject to change.
BATTERY REMOVAL AND DISPOSAL
This product uses a rechargeable and reusable lithium-ion battery. When the battery nolonger holds a charge, it should be removed from the vacuum and recycled. DO NOT incinerate or compast the battery.
When your lithium-ion battery needs to be replaced, dispose of it or recycle it in accordance with local ordinances o regulations. In some areas, it is llegal to place spent lithium-ion batteries in the trash or in a municipal solid waste stream. Return spent battery to an authorized recycling center o to retailer for recycling. Contact your local recycling center for information on where to drop off the spent battery.
For more information on battery removal for disposal, please visit sharkclean.com/batterysupport
LITHIUM-ION BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY
The RBRC™ (Rechargeable Battery Recycling Corporation) seal on the lithium-ion battery indicates that the costs to recycle the battery at the end of its useful life have already been paid by SharkNinja. In some areas, itis llegal to place spent lithium-ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative.
RBRC, in cooperation with SharkNinja and other battery users, has established programs in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help protect our environment and conserve natural resources. by returning the spent Iithium-ion battery to an authorized SharkNinja service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battary, or call 1-800-708-7398,
READ OWNER’S MANUAL
SHARK is a registered trademark of SharkNinja Operating LLC.
PETEXTRACT and SHARK CYCLONE are trademarks of SharkNinja Operating LLC.
RBRC is a trademark of Rechargeable Battery Recycling Corporation.
This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information.
Illustrations may differ from actual product.
TECHNICAL SPECIFICATIONS
CH700 Series: 7.2V
Charging Adapter part number:
XCHRGCH700
NOTE: In order to ensure the highest possible standard for refurbished items, all units are thoroughly inspected as part of the process.
For this item, water may be used during the refurbishing process and so; you may notice some condensation in the water reservoir. It is recommended to rinse the water reservoir with fresh water prior to its first use.
PRINTED IN MEXICO
Elbrd: J.M. / SC: 20-03-2025
OBPN: N/A / SHDML: CH701_E2GB
Documents / Resources
![]() |
Shark CH701 Series Handheld Vacuum with Hyper Velocity [pdf] Owner's Manual CH701_E2GB, 814100191C, CH701 Series Handheld Vacuum with Hyper Velocity, CH701 Series, Handheld Vacuum with Hyper Velocity, Vacuum with Hyper Velocity, Hyper Velocity |