Official Hotpoint warranty & serial services
Read the plate. Check the evidence.
Check supported North American GE-produced Hotpoint appliance date codes and the separately printed model number.
Browse Hotpoint manuals and guides →Check a documented system
US / Canadian GE-produced Hotpoint appliances; UK / European Hotpoint and other licensees require their own numbering documentation.
Choose the equipment family
Use the complete equipment label, its separate model number and the documented product family. A repeating date code does not establish the model, purchase date, installation date or warranty entitlement.
Use the GE-built refrigerator, cooking, dishwasher or laundry guide only after confirming the actual manufacturer and market. The GE service nomenclature guide documents Hotpoint within the supported GE-produced family.
Find US/North American GE-built Hotpoint appliances manuals →
GE technical service guide 31-9237: GE, Hotpoint and Americana nomenclature ↗
UK/European Hotpoint and Indesit systems and undocumented older independent formats are outside this North American GE-family decoder. Use the exact product manual and responsible manufacturer.
Find Other Hotpoint markets and older independent products manuals →
GE locator: applies only after confirming the GE-built product family ↗
Compare the source examples
The serial-only check retains every supported year. The source-context check also enters the photographed model and the decade identified by the source. Those are separate clues: neither the model nor the source’s chosen year is uniquely encoded in these serials.
The date above comes from the source’s caption. Camera timestamps, country labels and case references are not manufacture-date or factory codes.
The date above comes from the source’s caption. Camera timestamps, country labels and case references are not manufacture-date or factory codes.
Read the label on your product
This page’s GE-family guidance is for confirmed US/North American GE-built Hotpoint appliances. Check the manufacturer and country/market on the actual label before using GE positions or date codes; Hotpoint products in other markets can use different systems.
Choose your product type to see its label locations. An identification example may illustrate the fields without containing a valid date code.
These GE locator positions are guidance for confirmed US/North American GE-built appliances only. Match the actual model and product style; older label placement can differ.
These GE locator positions are guidance for confirmed US/North American GE-built appliances only. Match the actual model and product style; older label placement can differ.
These GE locator positions are guidance for confirmed US/North American GE-built appliances only. Match the actual model and product style; older label placement can differ.
These GE locator positions are guidance for confirmed US/North American GE-built appliances only. Match the actual model and product style; older label placement can differ.
UK/European Hotpoint and Indesit products, old independent Hotpoint formats and other manufacturers are not established by the US GE date chart.
Scope matters
Research reviewed October 16, 2026. This independent tool applies published rules and retains unresolved years and model candidates.
Confirmed North American GE / GE Profile appliances, GE-built Americana / US Hotpoint, and documented Zoneline AZ75, AZ85, AZ90/91 and AZ95 layouts. Other GE HVAC and water-heater systems need separate rules.
Year codes repeat. All documented candidate years are shown; the newest year is not selected automatically. GE chart inconsistently lists 1972 under both N and R, 1973 under both P and S; both entries are retained as printed in the source chart. No factory/model inference from first two letters. Manufacturer Zoneline examples illustrate this same month/year layout. A single year printed beside an example supplies independent example context; it does not erase other literal year cycles.
Legacy North American GE appliances.
The two-character year values come directly from GE’s chart. This interpretation is deliberately opt-in; serial placement is inferred from first-character-month convention plus the two-letter year entries.
The GE chart lists two-letter year codes but does not give a complete serial specimen. Select only after confirming a legacy GE plate/system.
Only the explicitly selected, confirmed GE appliance date-prefix system. This is not a complete serial lookup.
The manufacturer uses two-letter examples such as GA to explain repeating manufacture dates. Preserve all literal chart years; a two-letter prefix is shared by many units and cannot establish a unique product, full model, factory or warranty.
Choose this option only when entering the two leading date letters from a confirmed GE appliance label. These letters are a partial date prefix, not the unique serial or a model identifier.
Reading your result
Some systems reuse letters or only encode the last one or two year digits. Every supported interpretation is retained. A decade supplied from reliable records can narrow the reading; the tool does not automatically pick the newest year.
Usually the model is a separate plate field. Where published serial ranges actually identify a model, the result shows model candidates and links to their manuals. Overlapping ranges remain ambiguous.
After a lookup, the address includes the serial in a fragment beginning with #serial=. Use “Copy share link” to share the serial and selected context. Opening the link runs the same lookup. The fragment is not a query-string result page.