SenseFuture logo

VCS Laser Current Driver
PRODUCT INTRODUCTION MANUAL
Striving for the Bright Future of Precision Optical Measurement.
SenseFuture Technologies Co., Ltd.
Laser Current Driver (VCS Series)

Product Functions

VCS is primarily used for low-noise current driving of lasers, allowing adjustment of laser driving current by varying the input voltage.

SenseFuture VCS100 VCS Laser Current Driver - Fig 1

Product Features

  • Capable of outputting up to 23V, suitable for driving virtually all low-power lasers, including DFB, VCSEL, ICL, QCL, etc.
  • Capable of outputting up to 1A current, suitable for driving virtually all low-power lasers, including DFB, VCSEL, ICL, QCL, etc.
  • Maximum output current can be limited via a potentiometer, ensuring laser safety.
  • Supports remote control of output enablement and monitoring of output current.
  • Offers super-stable output current bias and permits current modulation.

Product Parameters

Table1 Basic Parameters of VCS

PARAMETERS MODEL UNIT
VCS100 VCS250 VCS500 VCS1000
Current-to-Voltage Ratio 20 50 100 200 mA/V
Maximum Output Current 100 250 500 1000 mA
Supply Voltage 12~24 V
Output Voltage / Compliance Voltage Supply Voltage-1 V
Current Noise <0.9 μA
Temperature Coefficient Impact <50 ppm/℃
Temperature Coefficient Impact 2 mA
Regulation Rise/Fall Time 800/600 ns
Modulation Depth 90% @1MHz
Bandwidth (3dB Point) 2 MHz
Modulation Input Voltage Range 0~5 V
Input Pin Impedance 10
Remote Enable Voltage Input Output Enable: High Level (>2V, I>5mA) Output Disable: Low Level (<2V)
Current Monitoring Factor 50 20 10 2 V/A
Operating Ambient Temperature Range -20~60 -20~35 °C
Operating Ambient Humidity Range 0~98 %RH
Heat Dissipation Requirements No additional cooling required within the rated operating range
Dimensions 47.5*42.8*19.5 47.5*42.8*32.2 mm
Weight ≈50 ≈100 g

Interface Introduction

SenseFuture VCS100 VCS Laser Current Driver - Fig 2

Number Pin Name Pin Type Pin Definition
1 Enable Input The enable port: when at a low level, the laser current driver does not operate; when at a high level or floating, the laser current driver operates.
2 Monitor Output Actual current monitoring pin (0~5V)
3 Input Input Modulation Voltage Input Pin (0~5V)
4 GND Input Signal Ground Pin
5 Vref Output Reference Voltage Output Interface (0~5V)
6 Offset Input Current Bias Interface (0~5V)
7 Limit Input Current Limiting Interface (0~5V)
8 GND Input Signal Ground Pin
9 Vin Input Power Supply Positive Input Pin (12~24V)
10 GND Output Power Supply Negative Input Pin
11 Output+ Output Positive Current Output
12 Output- Output Negative Current Output

SenseFuture VCS100 VCS Laser Current Driver - Fig 3

Knob Name Function
Limit Maximum Output Current Limit Adjustment Knob, turns clockwise to decrease, counter-clockwise to increase.
Offset Output Bias Current Adjustment Knob, turns clockwise to decrease, counter-clockwise to increase.

Dimensional Drawing

SenseFuture VCS100 VCS Laser Current Driver - Fig 4

SenseFuture VCS100 VCS Laser Current Driver - Fig 5

Test Data (Partial)

6.1 Current Noise Spectral Density

SenseFuture VCS100 VCS Laser Current Driver - Fig 6

6.2 Rise/Fall Time

SenseFuture VCS100 VCS Laser Current Driver - Fig 7

6.3 Modulation Depth

SenseFuture VCS100 VCS Laser Current Driver - Fig 8

6.4 Modulation Bandwidth(3dB)

SenseFuture VCS100 VCS Laser Current Driver - Fig 9

6.5 Temperature Drift Test(VCS100)

Load ResistanceΩ Temperature Current(A)
10 -20 0.0415605
10 -10 0.0415805
10 10 0.0416017
10 20 0.0416302
10 30 0.0416501
10 40 0.0416751
10 50 0.0417005
Temperature Coefficient (ppm/) 47.08

Instructional Video

SenseFuture VCS100 VCS Laser Current Driver - Symbol 1【SenseFuture】Laser Current Driver (VCS Series) Instructions for Use https://www.youtube.com/watch?v=oxOiF9q8RxI&t=34s

Partners

01 Universities and Research Institutes

SenseFuture VCS100 VCS Laser Current Driver - Symbol 2

02 Optical Instrument Technology Company

SenseFuture VCS100 VCS Laser Current Driver - Symbol 3

SenseFuture logo

Add:4F, Building B, Gaoke Innovation Center, Guangming District, Shenzhen, Guangdong, China
Tel:+86 191 2054 5883
Mail:sales@sensefuture.com
Web:www.sensefuture.com / www.sensefuture.com.cn

Original Aspiration Determines the Future, Innovation Creates Value, Sharing Unites Hearts.
Looking forward to achieving win-win cooperation with you!

Download

SenseFuture VCS100 VCS Laser Current Driver - QR Code

https://drive.weixin.qq.com/s?k=AOUACgeIACgQ71UAUE

SenseFuture Technologies Co., Ltd.

Documents / Resources

SenseFuture VCS100 VCS Laser Current Driver [pdf] Instruction Manual
VCS100, VCS250, VCS500, VCS1000, VCS100 VCS Laser Current Driver, VCS100, VCS Laser Current Driver, Laser Current Driver, Current Driver

References

Leave a comment

Your email address will not be published. Required fields are marked *