sellEton SL-910-3 Remote Display

USER MANUAL

www.selletonscales.com

FEATURES

• Connects to your indicator to display live weight on a larger screen
• Bright LED segment display is readable in high and low light
• 6 digit display
• Painted metal construction with acrylic lens
• For indoor use only
• Two mounting holes located on back
• Connects to most indicators

MOUNTING DIMENSIONS

CONNECTOR

SET-UP EXAMPLE

Here is an example of how to pair your scoreboard to SellEton’s most popular indicators. To set up SL-910 remote display, parameter settings need to be changed on your SL-7510 or SL-7516 indicator to allow communication between the two devices.

SL-7510 PARAMETER SETTINGS

To enter parameter settings, follow the procedure below:

1. Press and hold the HOLD and PRINT key at the same time for 2 seconds
2. Use the arrow keys to change C01 to C18
3. Press the PRINT key to enter/edit the parameter setting
4. Use the arrow keys to change the settings of the below parameters
5. Press the ACCUM key to save and exit parameter settings

SL-7516 PARAMETER SETTINGS

To enter calibration/parameter settings, follow the procedure below:

1. Press and hold the ON/OFF and SET key at the same time for 2 seconds
2. Use the arrow keys to change C01 to C18
3. Press the SET key to enter/edit the parameter setting
4. Use the arrow keys to change the settings of the below parameters
5. Press the ON/OFF key to save and exit parameter settings

Function					Parameter						Settings/Options
Communication Setting					C18						Set the serial interface data output method: 0 = Turn off serial interface data output 1 = Continuous sending mode, for remote display 2 = Print mode, for ticket printer 3 = Command request mode, connect computer. 4 = PC continuous sending mode, connect computer
Baud Rate					C19						0=1200 (SL-910 remote display) 1=2400 2=4800 3=9600

For more help, contact us at: 844-735-5386

Remote Display Continuous Sending Mode

Note: Baud Rate must be set to 1200

Output Continuous Format

S T X

S W A

S W B

S W C

X

X

X

X

X

X

X

X

X

X

X

X

C R

C K S

1

2

3

4

5

6

 

State A
Bits0,1,2
0						1									2						Decimal point position
1						0									0						XXXXXX0
0						1									0						XXXXXXX
1						1									0						XXXXX.X
0						0									1						XXXX.XX
1						0									1						XXX.XXX
Bits3,4																					Division
0												1									X1
1												0									X2

 

State B

BitsS

function

Bits0

gross=0, net=1

Bits1

Symbol: positive=0, negative=1

Bits2

Overload (or under zero)=1

Bits3

dynamic=1

Bits4

unit: lb=0, kg=1

Bits5

Constant 1

Bits6

Constant 0

 

State C

Bit2

Bit1

Bit0

unit

0

0

0

Kg or lb

0

0

1

g

0

1

0

t

Bit 3

printing=1

Bit 4

Extend display=1

Bit 5

Constant 1

Bit 6

Constant 0

Specifications

• Model: SL-910 Remote Display
• Available Displays: 3, 5, 8
• Mounting Dimensions:
  • SL-910-3: A=21.25, B=7.25, C=12.75, D=1.25
  • SL-910-5: A=30.75, B=10.25, C=14.25, D=1.50
  • SL-910-8: A=39.00, B=19.75, C=23.35, D=3.25
• Connector: Black Ground, Red Receive

---

FAQ

Q: What should the Baud Rate be set to for the SL-910 remote display?

A: The Baud Rate must be set to 1200 for the SL-910 remote display to function properly.

Q: How can I get more help or support?

A: For further assistance, please contact us at 844-735-5386.

Documents / Resources

sellEton SL-910-3 Remote Display [pdf] User Manual SL-910-3 Remote Display, SL-910-3, Remote Display, Display

References

• User Manual