SEENDA COE203 3 Device Wireless Bluetooth Keyboard and Mouse Combo
User Manual
- 3-Device Wireless Bluetooth Keyboard and Mouse Combo
Product Warranty
- All Seenda products come with a 24-month warranty policy.
- Please do not hesitate to contact us if you have any questions.
- Our support team will try our best to provide you with a pleasant shopping experience.
- Our email: support@seenda.com
- Our website: www.seenda.com
- Phone: +1844-968-2543
- Mon-Fri: 10 AM – 2 PM; 3 PM – 7 PM ET
- Closed during Holidays
Product Features
- A: Left Button
- B: Right Button
- C: Scroll Wheel
- D: DPI Button
- E: 2.4G Indicator / DPI Indicator
- F: BT2 Indicator / DPI Indicator
- G: BT Indicator / DPI Indicator
- H: Channel Switch Button
- I: Battery Compartment
- J: Power Switch
- K: USB Receiver
USB Connection
2.4G USB Connection
- Place 2 AAA batteries into the battery compartment on the underside of the keyboard and 1 AA battery into the battery compartment on the bottom of the mouse. (Ensure correct polarity: positive and negative terminals must match.)
- Turn the Power Switch of both the keyboard and the mouse to ON.
- Press
on the keyboard until the 2.4G Indicator lights up, confirming the keyboard is in 2.4G mode. (If the 2.4G USB indicator doesn’t light up, try pressing FN +.
- Press the channel switch button on the bottom of the mouse. The 2.4G Indicator will light up, indicating the mouse is in 2.4G mode.
- Take out the USB receiver from the mouse’s battery compartment.
(Note: The keyboard and mouse share one USB receiver.)
- Plug the USB receiver into the USB port of the computer, and then the keyboard and mouse can work normally.
Keyboard Bluetooth Connection
- Place 2 AAA batteries into the battery compartment on the underside of the keyboard. (Ensure correct polarity: positive and negative terminals must match.)
- Turn the power switch to ON.
- Press the Channel Switch Button
until the corresponding channel indicator is on. (If the indicator does not light up, try to press FN + Long-press the channel switch button for 3-5 seconds until the corresponding channel indicator flashes quickly, and the keyboard enters Bluetooth pairing mode.
- Turn on the Bluetooth settings on your device, search or select “SEENDA COE203 KB”, and start Bluetooth pairing until the connection is completed.
Mouse Bluetooth Connection
- Place 1 AA battery into the battery compartment on the bottom of the mouse. (Ensure correct polarity: positive and negative terminals must match.)
- Turn the power switch to ON.
- Press the Channel Switch Button at the bottom of the mouse until
it lights up, the mouse enters Bluetooth mode.
Long press Channel Switch Button for 3-5 seconds, flashes quickly, the mouse enters pairing mode.
- Turn on the Bluetooth settings on your device, search or select “SEENDA COE203 MS”, and start Bluetooth pairing until the connection is completed.
Keyboard Channel Switching
- After
they are connected, single-press the channel button on the keyboard, and easily switch between multiple devices.
NOTE: If FN lock is enabled, please press FN + to switch between connected devices.
Mouse Channel Switching
- After
are connected, single-press the channel switch button on the bottom of the mouse, and easily switch between multiple devices.
Keyboard Low Battery Instructions
- When the low battery indicator flashes red, it indicates that the keyboard is entering a low battery state.
- If the batteries are not replaced, the keyboard will automatically shut down.
- The keyboard requires two AAA batteries. When installing the batteries, please ensure that the positive and negative poles are correctly aligned.
Keyboard Multimedia Function Keys
Note: The FN function is a cyclic mode (F1-F12 and multimedia functions are cyclically used).
Product Specifications
Keyboard Parameters
Mouse Parameters
System Compatibility
Sleep Mode
- When the keyboard/mouse stops working for 60 minutes, it will automatically enter sleep mode for energy saving.
- When you use the keyboard/mouse again, you only need to press any key, and the keyboard/mouse will wake up within 3-5 seconds.
- The channel indicator light will turn on again and start working.
Memory Function
- The keyboard/mouse has a memory function.
- When a channel is connected normally, the keyboard/mouse defaults to this channel after turning off the device and turning it back on, and the channel indicator lights up.
Package Content
- 1* Wireless Keyboard
- 1* Wireless Mouse (The receiver is on the bottom of the mouse)
- 1* User Manual
Safety Warning
IMPORTANT: To reduce risk of fire, electric shock, or injury, follow these safety instructions.
- Heat Exposure: Avoid leaving the item in high-temperature environments or in direct sunlight, which could result in a fire hazard.
- Liquid Exposure: Keep the item away from water and liquids. Do not use if wet until thoroughly dried.
- Damage and Leakage: Cease usage and consult customer service if the item is damaged or the battery leaks.
- Correct Disposal: Follow local regulations for disposing of electron- ic devices and batteries. Do not dispose of with household waste.
- Radio Frequency Interference: This device may cause interference with other electronics. Keep a safe distance from sensitive devices.
- Child Safety: Keep the item and its components out of reach of children to avoid choking or battery ingestion hazards. Never allow children to handle the item unsupervised.
- CAUTION: Non-compliance with the above warnings can lead to serious injury or property damage.
EU Declaration of Conformity
FAQ
How to deal with disconnection issues, keys repeating or typing & clicking delay?
• Low Battery: Please replace new batteries in time. A low battery can affect the performance of the keyboard mouse. • 2.4G Wireless Connection: If using a USB to connect the keyboard mouse to the device, unplug and replug the USB receiver. Try using a different USB port if needed. • Bluetooth Connection: If connecting the keyboard mouse to the device via Bluetooth, delete the Bluetooth name from your device's Bluetooth connection list, restart your device, and re-pair the keyboard/mouse by following the steps in the user manual. • Distance Limit: Keep a distance of within 10 meters 33 feet for optimal signal strength. • Try Other Devices: If the issues persist, try to connect the keyboard mouse to other devices to check if the same issues occur and don't hesitate to contact our customer service for assistance.
How to deal with keyboard/mouse won't turn on or stops working?
• Please note the positive and negative poles when installing the batteries. • Try to change another new batteries to confirm whether it is a battery issue or a fault with the keyboard and mouse. • If the power indicator of the keyboard does not light up at all, please do not hesitate to contact our customer service for assistance.
What should I do if keys/ mouse buttons stop working or feel sticky?
• Basic Fixes: Clean debris with compressed air for keys or a cotton swab dipped in isopropyl alcohol for buttons. • Pro Tip: Avoid water or debris entering the keyboard, as these are the main causes of unresponsive keys.
Documents / Resources
 |
SEENDA COE203 3 Device Wireless Bluetooth Keyboard and Mouse Combo [pdf] User Manual COE203, COE203 3 Device Wireless Bluetooth Keyboard and Mouse Combo, 3 Device Wireless Bluetooth Keyboard and Mouse Combo, Wireless Bluetooth Keyboard and Mouse Combo, Bluetooth Keyboard and Mouse Combo, Keyboard and Mouse Combo |