SECOMP 21131191 8 Port Nway PoE Fast Ethernet Switch
Introduction
This switch provides 8 10/100M ports. It was designed for easy installation and high performance in an environment where traffic is on the network and the number of users increases continuously. It consists of 8 PSE/PoE ports. That can solve the limitation of the power outlet location and offer the system designer a flexible solution to locate the network device everywhere. The compact rigid desktop size was specifically designed for small to medium workgroups. It can be installed where space is limited; moreover, it provides smooth network migration and easy upgrade to network capacity.
Package Contents
Before you start to install this switch, please verify your package that contains the following items:
- One PoE Fast Ethernet Switch
- One Power Cord
- One Quick Installation Guide
Note: If any of these items is found missing or damaged, please contact your local supplier for replacement.
Key Features
- 8 Port 10/100M Nway (Auto-negotiation) Switch
- 8 PSE/PoE function ports
- Supporting the power Max. 30 W for each PSE/PoE port
- 11” Desktop size with metal case
- Can be installed in a 19” cabinet by rack-mount kits
- Auto-learn of networking configurations
- Auto-detect full/half-duplex modes for any port
- Dedicated full-duplex 200Mbps bandwidth
- Store-and-Forward switching methods
- IEEE 802.3x flow control for full-duplex and back-pressure flow control for half-duplex
- Non-blocking & Non-head-of-line blocking full wire speed forwarding
- Auto-MDI/MDI-X function for any port
- Smart plug & play
Front Panel (LEDs)
LED Indicators of 8 Port PoE 10/100M Switch
| LED | Status | Description |
| Power | On | Power is on. |
| Off | Power is off. | |
| LINK/ACT | On | Port is for connection. |
| Off | No connection. | |
| Flashing | Data is transmitting or receiving | |
| PoE | On | Port is linked to Power Device |
| Off | No Power Device is connected |
Connections
Switch/Hub to this 8 Port PoE Fast Ethernet Switch
This switch provides automatic crossover detection functionality for any port. It is simple and friendly to up-link to another switch without crossover cable.
PC/Other devices to this 8 Port PoE Fast Ethernet Switch
Via a twisted pair cable straight through, this switch can be connected to PCs, servers and other network devices.
Power Device to this 8 Port PoE Fast
Ethernet Switch and getting 48~56V power source through Cat. 5 cables Using Cat. 5 twisted-pair cable to connect Power Device to the port 1~8 of this switch, and then this switch will supply 48~56V power to Power Device over Cat. 5 twisted-pair cable. Please be noted Power Device should also comply with IEEE 802.3af/ IEEE 802.3at standard.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz) UL Safety
Technical Specifications
| Standards | IEEE 802.3af IEEE 802.3at
IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3x Flow control |
| Features | Number of Ports:
8 PSE/PoE+ Ports MAC Address: 4K Buffer Memory: 1.5 Mbits Method: Store and Forward |
| Filtering/ Forwarding Rates | 100Mbps port – 148,800pps 10Mbps – 14,880pps |
| Transmission Media | 10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP |
| LED
Indicators |
Per Port: LINK/ACT, PoE ACT/Status
Per Unit: Power |
| Power Input | 100~240V/AC, 50~60Hz to 48-56 VDC/130W |
| Power Output | 48-56VDC/ 30W Max. Per Port |
| PoE Mode | Mode A |
| Power Consumption | 130 Watts (Max) |
| Dimensions | 266 × 160 × 44 mm (L x W x H) |
| Weight | 1.6 kg |
| Operating Temperature | 0 to 45℃ |
| Storage Temperature | -20 to 85℃ |
| Humidity | 10 to 90% RH (non-condensing) |
| Certifications | FCC Class B, CE mark Commercial |
Documents / Resources
 |
SECOMP 21131191 8 Port Nway PoE Fast Ethernet Switch [pdf] Installation Guide 21131191 8 Port Nway PoE Fast Ethernet Switch, 21131191, 8 Port Nway PoE Fast Ethernet Switch, PoE Fast Ethernet Switch, Fast Ethernet Switch, Ethernet Switch, Switch |
