Installation Guide for SECOMP models including: 21131191 8 Port Nway PoE Fast Ethernet Switch, 21131191, 8 Port Nway PoE Fast Ethernet Switch, PoE Fast Ethernet Switch, Fast Ethernet Switch, Ethernet Switch, Switch

21131191 en manu scmp

stefan.petri

Download

ROLINE PoE Fast Ethernet Switch, 8 Ports (8x PoE) - SECOMP UK

ROLINE PoE Fast Ethernet Switch, 8 Port, (8x PoE), 19" Einbau - SECOMP Electronic Components GmbH

ROLINE PoE Fast Ethernet Switch, 8-Poorts, (8x PoE), 19" Inbouw - SECOMP Nederland GmbH

PDF preview unavailable. Download the PDF instead.

21131191 en manu scmp
8 Port Nway PoE Fast Ethernet Switch
Quick Installation Guide

FCC Warning
This device has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates and radiates radio frequency energy and, if not installed and used in accordance with the user's manual, it may cause interference in which case users will be required to correct interference at their own expenses.
CE Warning
This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.
Introduction
This switch provides 8 10/100M ports. It was designed for easy installation and high performance in an environment where traffic is on the network and the number of users increases continuously.
It consists of 8 PSE/PoE ports. That can solve the limitation of the power outlet location and offer the system designer a flexible solution to locate the network device everywhere.
The compact rigid desktop size was specifically designed for small to medium workgroups. It can be installed where space is limited; moreover, it provides smooth network migration and easy upgrade to network capacity.

Package Contents
Before you start to install this switch, please verify your package that contains the following items:
 One PoE Fast Ethernet Switch  One Power Cord  One Quick Installation Guide
Note: If any of these items is found missing or damaged, please contact your local supplier for replacement.
Key Features
 8 Port 10/100M Nway (Auto-negotiation) Switch
 8 PSE/PoE function ports  Supporting the power Max. 30 W for each
PSE/PoE port  11" Desktop size with metal case  Can be installed in a 19" cabinet by
rack-mount kits  Auto-learn of networking configurations  Auto-detect full/half-duplex modes for any
port  Dedicated full-duplex 200Mbps bandwidth  Store-and-Forward switching methods  IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex  Non-blocking & Non-head-of-line blocking
full wire speed forwarding  Auto-MDI/MDI-X function for any port  Smart plug & play

Front Panel (LEDs)

LED Indicators of 8 Port PoE 10/100M Switch

LED

Status

Power On

Off

LINK/ACT On

Off

Flashing

PoE

On

Off

Description Power is on. Power is off. Port is for connection. No connection. Data is transmitting or receiving Port is linked to Power Device No Power Device is connected

Connections
Switch/Hub to this 8 Port PoE Fast Ethernet Switch This switch provides automatic crossover detection functionality for any port. It is simple and friendly to up-link to another switch without crossover cable.

PC/Other devices to this 8 Port PoE Fast Ethernet Switch Via a twisted pair cable straight through, this switch can be connected to PCs, servers and other network devices.
Power Device to this 8 Port PoE Fast Ethernet Switch and getting 48~56V power source through Cat. 5 cables Using Cat. 5 twisted-pair cable to connect Power Device to the port 1~8 of this switch, and then this switch will supply 48~56V power to Power Device over Cat. 5 twisted-pair cable. Please be noted Power Device should also comply with IEEE 802.3af/ IEEE 802.3at standard.
Rear Panel (Power) AC input AC input (100~240V/AC, 50~60Hz) UL Safety

Technical Specifications

Standards
Features
Filtering/ Forwarding Rates Transmission Media LED Indicators
Power Input Power Output PoE Mode Power Consumption Dimensions Weight Operating Temperature Storage Temperature
Humidity
Certifications

IEEE 802.3af IEEE 802.3at IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3x Flow control Number of Ports: 8 PSE/PoE+ Ports MAC Address: 4K Buffer Memory: 1.5 Mbits Method: Store and Forward
100Mbps port ­ 148,800pps 10Mbps ­ 14,880pps
10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5 UTP/STP Per Port: LINK/ACT, PoE ACT/Status Per Unit: Power 100~240V/AC, 50~60Hz to 48-56 VDC/130W 48-56VDC/ 30W Max. Per Port Mode A
130 Watts (Max)
266 × 160 × 44 mm (L x W x H) 1.6 kg
0 to 45
-20 to 85
10 to 90% RH (non-condensing) FCC Class B, CE mark Commercial


Microsoft: Print To PDF