SEALEY AP3 3 Drawer Unit for Work Benches Instruction Manual
1. SAFETY
- WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this drawer unit.
Locate bench with drawer unit in a suitable working area.
Keep the work area clean, uncluttered and ensure there is adequate lighting. - WARNING! Use bench with drawer unit on level and solid ground, preferably concrete.
Keep bench and drawer unit clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the working area. - WARNING! Neither the drawer unit or bench to which it is fitted are electrically insulated and neither is therefore suitable for electrical repairs of any sort.
DO NOT use bench or drawer unit for any purpose other than that for which it is designed.
DO NOT use a bench with drawer unit fitted outside.
DO NOT get bench or drawer unit wet, or use in damp or wet locations or areas where there is condensation.
DO NOT clean bench or drawer unit with any solvents which may damage the paint surface. - WARNING! Workbenches with drawer units are heavy and assistance should be obtained before moving them.
2. Introduction
Optional unit for added drawer space on any of the AP120 and AP30 series workbenches. Manufactured in steel plate for industrial durability and finished in red gloss to prevent corrosion. Lockable drawers, which can be installed on the left or the right of the workbench.
3. Specification
4. assembly
4.1. On the wider benches with alternative runner positions, decide whether the drawer unit is to be placed on the left on on the right.
4.2. Lift the drawer unit and slide the outward turned flanges at the top of the unit sides onto the inwards turned flanges of the runners beneath the bench top, see Fig.1A.
4.3. Push the unit fully in until it stops. Screw the drawer unit retaining plate into position on the back of the drawer unit using the holes and self tapping screws provided.
4.4. Ensure that the flange at the top of the retaining plate faces inwards and bears against the ends of the runners, see Fig.1B.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling center and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Sole UK Distributor, Sealey Group.
kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk.
IP32 7AR
Read More About This Manual & Download PDF:
Documents / Resources
 |
SEALEY AP3 3 Drawer Unit for Work Benches [pdf] Instruction Manual AP3 3 Drawer Unit for Work Benches, AP3, 3 Drawer Unit for Work Benches, Unit for Work Benches, Work Benches |
