Electric LC2D A Series TeSys Deca Reversing Contactor
Instruction Manual
LC1DppApp / LC1DppA3pp / T02DN13pp
LC2DppApp / LC2DppA3pp / T02DN23pp

LC2D A Series TeSys Deca Reversing Contactor

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Disconnect all power before servicing equipment.
Failure to follow these instructions will result in death or serious injury.

WARNING
HAZARD OF FIRE OR ELECTRIC SHOCK
On contactors connected to a feeder circuit, it is mandatory to install large spacing adapters GV3G66 on top and bottom connections of the contactor to respect UL and  CSA requirements in North America.
Failure to follow these instructions can result in death, serious injury, or equipment damage.

AC/DC:

• use of this product in EMC environment B may require mitigation measures to avoid unwanted disturbance.
• full open AC at 10%Us.

WARNING

HAZARD OF FIRE OR ELECTRIC SHOCK (FOR CONTACTOR WITH UL HI-FAULT SHORT CIRCUIT CURRENT RATINGS ONLY)

• The opening of the branch-circuit protective device may be an indication that a fault current has been interrupted.
• To reduce the hazard of fire or electric shock, current-carrying parts and the other components of the controller should be examined and replaced if damaged.
  Failure to follow these instructions can result in death, serious injury, or equipment damage.

Additional ratings

Lighting Tungsten

Lighting Ballast

DefLill e Purpose ratings, 3Phase, Load wiring: breaking all lines

Elevator Duty HP ratings (except .D and .W DC coil)

High-Fault SCCR Class J Fuse

High-Fault SCCR with CB

Device

600 V

600 V

FLA

LRA

1Ph 120 V

1Ph 240 V

3Ph 200 V

3Ph 230 V

3Ph 480 V

3Ph 600 V

600 V

480 V

600 V

240 V

480 V

600 V

LC1D40A

60 A

60 A

40 A

240 A

200 A

160 A

–

5hp

10hp

10hp

–

–

100 kA

100 kA

50 kA

LC1D50A

70 A

70 A

50 A

300 A

250 A

200 A

3hp’

7.5hp

15hp

15hp

25hp*

30hp*

100 kA

100 kA

50 kA

LC1D5OANR,

–

–

–

–

–

–

–

–

–

–

–

–

100 kA

100 kA

50 kA

LC1D65A/80A

70 A

80 A

390 A

325 A

208 A

3hr

10hp*

15hp*

20hp’

25hp*

30hp*

100 kA

100 1(A

50 kA

Refer to information on device label when ordering replacement parts.

The product’s manufacture date is coded PPYYWWD, where:

• PP: plant code
• YY: year of manufacture
• WW: week of manufacture
• (D: weekday of manufacture (Monday = 1))

LC1D A6

DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Disconnect all power before servicing equipment.
Failure to follow these instructions will result in death or serious injury.

Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F – 92506 Rueil Malmaison Cedex
www.se.com

Documents / Resources

Schneider Electric LC2D A Series TeSys Deca Reversing Contactor [pdf] Instruction Manual LC2D A Series, TeSys Deca Reversing Contactor, LC2D A Series TeSys Deca Reversing Contactor, Reversing Contactor, Contactor

References

• User Manual