scheppach HC 24-8 Oil Compressor Instructions

Contents hide

1 scheppach HC 24-8 Oil Compressor

2 Spare Parts List

3 Product Usage Instructions

4 Documents / Resources

4.1 References

5 Related Posts

scheppach HC 24-8 Oil Compressor

Product Information
The HC24-8 compressor by Scheppach (DIY) Garland, with the main product code 5906154942, is a compact and portable compressor suitable for small to medium-sized tasks. It has a maximum pressure of 8 bar and comes with various spare parts, including a cylinder head, air filter, valve plate, piston, and connecting rod.

Spare Parts List

Main products Spare part list
5906154942 171447 – 0145 – HC24-8 – –

Spare	Description	additional	Item	Abb.	ConstructStatus
02091241	cheese head screw	M6x40 8.8 912 VZ	1	A	*
5906101036	air filter	M16x1,5 Gewinde	3	A	*
5906154001	cylinder head		4	A	*
5906119002	o cycle part 5		5	A	*
5906154002	valve plate cpl.		6-9	A	*
02091237	cheese head screw M6x20 8.8 912 VZ	M6x20	11	A	*
5906154003	cylinder gasket		12	A	*
5906154004	piston ring set	(1 Satz = 3 Stück)	13	A	*
5906154005	Piston cpl.		15,26,27	A	*
5906154006	connecting rod		17	A	*
02091247	cheese head screw	M8x20 8.8 912 VZ	20	A	*
5906154007	rubber gasket		21	A	*
3906129009	breath pipe cpl.		22,23	A	*
5906154008	crankcase cover		24	A	*
5906115019	oil leveler with o-ring	SW22 / G 1/2″	26	A	*
02093405	hexagon nut M8	M8	28	A	*
5906154009	capacitance		30	A	*
5906154010	rotor		33	A	*
5906154011	stator		34	A	*
02798511	screw	M4x10 4.8 DIN7985 verzinkt	41	A	*
5906154012	fan		42	A	*
5906154013	fan cover		47	A	*
5906131011	quick coupling part 43	G 1/4″	49	A	*
5906115064	pressure switch	8 bar	50	A	*
5906154014	Unloading tube		52	A	*

Spare	Description	additional	Item	Abb.	ConstructStatus
5911210018	hex bolt	M8x20	54	A	*
02093405	hexagon nut M8	M8	55	A	*
5906101084	wheel axle (bulg length 47mm)	Bund Ø12,7 x 47mm	56,58-60	A	*
5906115051	wheel		57	A	*
5911210018	hex bolt	M8x20	60	A	*
5906115053	washer foot part 53		62	A	*
5906101066	vent bolt	3/8″ / Ø16,6mm	63	A	*
5906154015	High pressure pipe		64	A	*
5906115043	check valve only brass	G1/2″xG3/8″xG1/8″	65	A	*
5902106014	Power Line	2,3m / 3×1.00mm²	66	A	*
3906103030	lock nut 1/4″	G 1/4″ / SW 19	67	A	*
5906154016	Pressure gauge		68	A	*
5906101090	enclosed accessories bag		o.Abb.	A	*

Product Usage Instructions

Before use, make sure the compressor is on a stable surface and all components are securely attached.

Connect the power line to a power source and turn the compressor on by flipping the switch.
Adjust the pressure switch to the desired level, up to a maximum of 8 bar. The pressure gauge will display the current pressure level.

Attach the high-pressure pipe to the quick coupling part and connect it to the tool or device that requires compressed air.
During use, monitor the pressure level and turn off the compressor if it exceeds the recommended level or if there are any unusual sounds or vibrations.

After use, turn off the compressor and disconnect it from the power source. Release any remaining pressure by opening the vent bolt.
Perform regular maintenance as instructed in the user manual, including cleaning and replacing filters, checking oil levels, and inspecting for any wear or damage to components.

For more detailed information on spare parts and maintenance, please refer to the user manual or visit the Scheppach website for additional resources.

Do you know: From now on you can view spare parts lists in our spare parts shop and order spare parts and accessories directly. More information can be found here: https://www.scheppach.com/Shop.aspx